Repair/maintenance of fire hydrant system and allied works under MH and repair/replacement of arboriculture equipment and connected works at Bikaner Military Station under GE (N) Bikaner

Amount

M&L for taking down induction motor of capacity 40 HP, 3 Phase, 415 Volt including disconnecting electric connections, dismantling burnt winding from slots and rewinding the motor with new super enameled copper wire as used by the manufacturer / existing size including insulating material and varnishing, replacing worn out bearing as per existing size, nuts, bolts, washers, etc, painting with super enameled paint as per colour code, assembling the motor after rewinding and installation & commissioning at its original location and testing complete all as specified and as directed.

M&L for taking down electric motor of Jockey Pump set of capacity 10 HP 3 Phase 415 Volt including disconnecting electric connections, dismantling burnt winding from slots and rewinding the motor with new super enameled copper wire as used by the manufacturer / existing size including insulating material and varnishing, replacing worn out bearing as per existing size, nuts, bolts, washers, etc, painting with super enameled paint as per colour code, assembling the motor after rewinding and installation & commissioning at its original location and testing complete all as specified and as directed.

M&L for dismantling of diesel engine driven centrifugal pump set of 65 HP capacity, 3 Phase, 415 Volt with discharge 1150 LPS at pressure of 70 MWC including taking down from its foundation / base frame by disconnecting suction/delivery lines & coupling, opening, including required grinding, welding, machining, lathing, alignment, greasing, etc and replacing worn out spare parts, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. Make :- Kirloskar Note : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 4.01 to 4.07 here-in-after.

Supply only following spare parts for centrifugal pump of capacity 65 HP for replacement under serial item No. 3 here-in-before :- Note :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).

Inter stage ring

Gland Cap CI with nut, bolts complete

Neck ring bronze

Shaft Sleeve Bronze

Shaft Sleeve Nut (Bronze)

Gasket set manifold

Bearing suitable for pump set make – SKF/NBC/TATA

M&L for dismantling of centrifugal pump set of 40 HP capacity, 3 Phase, 415 Volt with discharge 950 LPM including taking down from its foundation / base frame by disconnecting suction/delivery lines & coupling, opening, including required grinding, welding, machining, lathing, alignment, greasing, etc and replacing worn out spare parts, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. Make :- Kirloskar Note : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 6.01 to 6.07 here-in-after.

Supply only following spare parts for centrifugal pump of capacity 40 HP for replacement under serial item No. 5 here-in-before :- Note :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).

Inter stage ring

Gland Cap CI with nut, bolts complete

Neck ring bronze

Shaft Sleeve Bronze

Shaft Sleeve Nut (Bronze)

Gasket set manifold

Bearing suitable for pump set make – SKF/NBC/TATA

M&L for dismantling of centrifugal pump set of 10 HP, 3 Phase, 415 Volt capacity with discharge 180 LPM at pressure of 70 MWC including taking down from its foundation / base frame by disconnecting suction/delivery lines & coupling, opening, including required grinding, welding, machining, lathing, alignment, greasing, etc and replacing worn out spare parts, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. Make :- Kirloskar Note : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 8.01 to 8.07 here-in-after.

Supply only following spare parts for centrifugal pump of capacity 10 HP for replacement under serial item No. 7 here-in-before :- Note :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).

Inter stage ring

Gland Cap CI with nut, bolts complete

Neck ring bronze

Shaft Sleeve Bronze

Shaft Sleeve Nut (Bronze)

Gasket set manifold

Bearing suitable for pump set make – SKF/NBC/TATA

Supply and fixing gun metal fire Hydrant valve single headed with instantaneous gun metal couplings of 63 mm dia with cast iron wheel (ISI marked) confirming to IS:5290 (Type-A) with blank gunmetal cap and chain as required including taking down old unserviceable hydrant valve complete all as specified and as directed. Make : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Supply & fixing fire fighting canvas hose pipe, cotton synthetic fibre, circular woven jacketed rubberised fabric, reinforced rubber lined (RRL), fire hose, delivery, treated against Rot with mystox, 35.7 Kg/sqcm brust pressure, 22 Kg/sqcm proof pressure, 63mm dia & 15 metre long (ISI marked) Type 'A' with instantaneous type male & female GM coupling (ISI marked) of 63mm dia bound and riveted to hose pipe with copper rivets & 1.5mm thick copper wire, fixed in repairs, complete all as specified and as directed. Make : DUNLOP / COSMOS / JAYSHREE / MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Supply & fixing of fire fighting Gun metal 63mm dia short branch pipe 20mm dia gun metal nozzle ISI marked (IS:903), suitable for instantaneous connection to inter connection hose pipe coupling as required, fixed in repairs, complete all as directed. Make : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Supply and fixing Hose Box (cabinet) made of 18 gauge MS sheet 800mm x 600mm x 250mm with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside yard, fixed in repairs, complete all as specified & as directed. Make : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Supply and fixing wall mounting swinging type first aid fire hose reel with drum, hanging brackets, 30 metre length x 20 mm dia high pressure hose reel tubing (ISI marked) with GM shut off nozzle having 5mm dia orifice. The hose reel shall confirming to IS:884-1985, drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block for internal hydrant system, fixed in repairs, complete all as specified & as directed. Make : JYOTI / DUNLOP / MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

S&F CI Butter fly valve (suitable for test pressure of PN 1.6) of 150mm bore confirming to IS:13095 (ISI marked) with flanges, nuts, bolts, gasket and washers, fixed in repairs, complete all as specified & as directed.

S&F CI Butter fly valve (suitable for test pressure of PN 1.6) of 50mm bore confirming to IS:13095 (ISI marked) with flanges, nuts, bolts, gasket and washers, fixed in repairs, complete all as specified & as directed.

Supply and fixing non return valve (NRV) of size 150mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve of 150mm bore.

Supply and fixing non return valve (NRV) of size 50mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve of 50mm bore.

S&F gun metal single acting air release valve with screwed inlet of 25 mm bore size, fixed in repairs, complete all as specified & as directed.

S&F bourdon dial type pressure gauge 100 mm dia, suitable for range 0-16 Kg rating with brass isolation valve and pipe, fixed in repairs, complete all as specified & as directed. Make : FEBING / TAYLOR / HGURU / FIEBIG

S&F dual dial type pressure switch suitable for 1-10 Kg rating including electrical connection setting of cut-in and cut-off pressure, fixed in repairs, complete all as specified & as directed. Make :- DANFOSS / HONEYWELL / SIEMENS / HGURU / FIEBIG

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 65 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 65 mm bore, complete, all as specified & directed.

Supply & fixing fire fighting gun metal Landing Valve with 75mm NB flanged inlet brass spindle, 63mm dia female inst Oblique outlet bearing IS-5290 Mark (ISI marked), flange OD 200mm, PCD 160mm four 19mm dia bolt holes, fixed in repairs, complete all as directed. Make : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Supply & fixing pressure limit switch IP 70, ISI marked, fixed in repairs, complete all as directed. Make :- DANFOSS / HONEYWELL / SIEMENS / HGURU / FIEBIG

Supply & fixing thermal over load relay range 17.4-24 Amps, fixed in repairs, complete all as directed.

Supply & fixing forged brass Ball Valve with forged brass ball suitable for test pressure of not less than PN 1.6 of size 25mm bore, fixed in repairs, complete all as directed.

Supply & fixing fire hose reel 20mm dia gun metal shut off nozzle having 5mm dia orifice, fixed in repairs, complete all as directed. Make : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Supply & fixing brass fire sprinkler, pendant type, standard size, minimum weight 95 gm, minimum flow - 8Gpm/ 30I/m, operating temperature - 155°F/68°C, fixed in repairs, complete all as specified and as directed. Make :- TYCO / CEASEFIRE / MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

S&F Foam jet fountain Nozzle of gun metal chromium plated of size inner dia 38mm upper dia 35mm & height 150mm, fixed in repairs, complete all as specified and as directed. Make : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE.

S&F Geyser Jet fountain Nozzle of gun metal chromium plated of size inner dia 50 mm, outer dia 78 mm & height 150 mm, fixed in repairs, complete all as specified and as directed. Make : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE.

S&F Geyser Jet fountain Nozzle of gun metal chromium plated of size inner dia 65 mm, outer dia 150 mm & height 225 mm, fixed in repairs, complete all as specified and as directed. Make : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE.

S&F Angular valve of gun metal chromium plated of size inner dia 20 mm, outer dia 25 mm, height 65 mm, fixed in repairs, complete all as specified and as directed. Make : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE.

S&F submersible flat cable of size 10 sqmm, 3 Core, multistranded copper conductor, PVC insulated and sheathed copper screen protected, 1100 Volts grade, fixed in repairs, complete all as specified and as directed.

S&F LED base water proof programmable colour changing lights as per site requirement, Number of LED-96 Nos, gun metal ring with chromium plated/aluminum powder coated housing for operative voltage - 18V DC, 6 Watt / 9 Watt, Colour - RGB, colour programmable, size 200 mm dia and 30 mm height minimum including necessary electrical work, fixed in repairs, complete all as specified & as directed. Make : Model 06R/108R, FM-5MM BODY-ABS/PVC of Creative or equivalent in Philips / Bajaj / Crompton Greaves / Raj / Aroma / Aquascape / Royal / Novatech or other equivalent make as approved by GE. Notes :- (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

M&L for galvanized steel water tubing medium grade of 80mm bore made to shape as required with & including all fittings such as Tee, union, bends, sockets, elbow, etc and fixed complete to walls and ceilings or laid in floors, fixed in repairs, complete all as specified & directed. Note :- Contractor’s quoted rates for this item shall deemed to include for all GI fittings and shaping of pipe as required for fountain. The tenderers shall work out the quantity of GI fittings considering the shape of fountain and accessories required to be fitted under other relevant items of this Schedule and quote their rates for this item accordingly.

Supply, fixing and testing micro processing DMX controller for changing colour of colour changing lights changing fast slow or fading of colour with operating voltage 18V DC, 5 Amps as per site requirement, fixed in repairs, complete all as specified and as directed. Make : Creative / Aroma / Aquascape / Royal / Novatech or other equivalent make as approved by GE.

M&L for taking down of defective induction motor of centrifugal pump set capacity 5 HP / 3.7 KW, 3 Phase, 50 Hz, 415 Volts, 950 LPM discharge at 25 metre head from the foundation, disconnecting the electric & water connections, coupling pulley, and transporting to work shop, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with new solid super enameled copper winding wire of size as used by manufacturer / existing size including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric & water connections, commissioning and testing of centrifugal pump & induction motor with & including repair of DOL starter of suitable capacity and necessary fixing arrangement complete all as specified and as directed.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Notes :- (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. Notes :- (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.

M&L for sub class ‘B’ (old size) burnt clay bricks laid flat and dry abutting each other with gap between adjacent bricks not exc. 10mm for protection of underground electric cable in such a way that the length of brick is at right angle to the central axis of cable, including taking out old bricks complete all as specified and as directed.

S&F MCCB, 4 Pole, 40 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & as directed.

M&L for galvanized steel water tubing medium grade of 25 mm bore (ISI marked) with & including all fittings laid in trenches, fixed to walls and ceilings or laid in floors, complete all as specified and as directed including dismantling and taking up or down existing unserviceable steel water tubing and connections of 25mm bore. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 100 bore GI/CI/DI water pipe line including made to shape, drilling and welding of 25mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as specified and as directed.

M&L for opening of submersible motor of capacity 5 HP, 3 Phase, 415 volts, vertical or horizontal any type, cutting down and removing existing burnt out copper winding, cleaning of slots and rewinding with new solid super enameled copper winding wire of size as used by manufacturer / existing size, replacement of worn out spare parts & cable connections, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. Note : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 49.01 to 49.08 here-in-after.

Supply only following spare parts for submersible pump of capacity 5 HP for replacement under serial item No. 48 here-in-before :- Note :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).

GM Bush

Rotor sleeve

Water seal

Thrust bearing

Thrust plate

Coupling Stainless Steel

Key for coupling

Seal bush

M/S SIDHU CONSTRUCTION COMPANY

Goyal Enterprises