Supply Installation Commissioning of New 20HP Submersible Pump

Amount

PART-A - S & D at site/store of sub pumping machineries set directly coupled with 3 ph 400 V (+- 10%) , 50 Hz AC RPM-2900 wet winding type sub motor having cr steel impeller and SS Shaft. Capacity 110-50 m^3/hr. Head range 35-41 m P-20 HP Model no BPHA-384/2D + HBC-203 with 3 mtr lead sub. cable and delivery size- 125mm. Make - KSB/TEXMO

S &D of 125 mm dia heavy duty PVC column pipe length 10' (3.1 m). Mk - Ashirbad/C.R.I/Rakhsa Ref.

S &D of 125 mm dia / 150 mm dia (5"/6") standard duty PVC/MS Adoptor.

S & D of Sub Coppe cable of 3 core 6 sq mm 1100 V grade. Mk-Finolex.

C.I. sluice valve with flanged ends drilled to as per I.S 1358/612 and having all cast iron components as per I.S 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq.cm. Spindle nut valve and seat faces of hard ware resisting, manufactured from best quality gun metal conforming to I.S 780/71. painted black all over with asphalt bas epaint tested to 21 kg (hydraulic pressure) per sq. cm.., valve opening to anticlockeise direction, fitted and fixed completed size 150 mm. Mk-IVC/Sree Durga/Fluid Teeh/Sigma flow.

CI double flange type NRV face to face IS 5312 hinge pin SS 410 drilling IS 1538 pressure rating PN 1.0 Mk-IVC/Sree Durga/Fluid Tech/Sigma flow

Supply of all types of CI specials viz bend, tee, tapper, tail piece, collers, bell mouth, with puddle collar etc as per specification. CI plain IS 5531 a D & f 150 mm dia 90 bend

b All end flanged 150 x 150 x 150 CI T-Piece

Supply, Delivery & installation of 415 V, 3 Phase, 50 hz auto-manual 20 KW Star-Delta starter control panel for sub p/m set (as per enclosed details) Mk- Sellwin/Electrmech/AC power

Supply,delivery at site 1.1 KV grade AI rmoured cable of size 3.1/2 core 35 sq mm confirming to 1554/70989pt) 1988 Mk-Have or equivalent

Supply of HT rubber mat of size 3' x 6'

Supply & delivery of 1200 mm sweep A.C ceiling Fan ( Orient, PSPO, summer cool/ new bridge) without regulator with all accessories

PART-B - S & F MS top clamp 12 x 80 mm section for Sub p/m set in two halves.

S & F of safety clamp for the p/m set 6 mm x 40 mm section.

Replacement by S & F of pressure gauge of range 0-200 sq in with cock.

Split by M.S fabricated suitable tube well cover for the tebe well non-sigh with necessary damping arrangement including holes for column pipe, air pipe & cable entry.

Construction of supporting pillars supporting platform for the resting of valves for easy operation with neat cement finish as per dirction of EIC.

S & F of CI double flanged pipe fitting and 1535 wef 38.62 kg x 2 nos 150mm

Supply, painting best quality weather thermal resistance paint apply quality two coats with necessary smoothening of surface and applicatonprimer incl materials, labour and hire charge of tools & plants etc all complete. Ref:- Do-

Replacement by S & F of protecting device comprising of wire rope clamps etc.

Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nut bolts, washer etc of quality to make the joint water tight as reqd hydraulic pressure and direction of EIC.

Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe, making all electrical and water line inter-connection complete as per direction including supply of necessary materials as reqd for the work.

Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415V TPN with fuse on L & N Make -Havells/Flora/equivalent.

Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp,240V DP with fuse on L & N Make -Havells/Flora/equivalent.

Supplying and fixing compression type gland complete with brass gland,brass ring & rubber ring for dust & moisturre proof entry of XLPE/PVC cable for 3.1/2 core upto 35 sq mm.

Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make). Tapes.anti corrosive paste & jinting materials 35 sq mm 3.1/2 core

Lasying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2X10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting.

Supply & Fixing bulkhead light fitting with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/ 100watts LED lamp complete set.

Supplying & fixing of 250 V , 4" LONG 40 W single / double FL. Tube light fittings complete with all accessories incl. LED/FL. Tube Phillips make.

S & D at site of TW single board size 14" X 16" .

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as requred.

Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as requred.

Supply & Fixing 240 V, 20 A PlugSocket (Brand approved by EIC) Plug top and switch board having backlight/persepex top cover By screws after making housing for combined plug switch by Cutting bakelight/Perspex cover & making neccessory connection With PVC wire and earth continuity wire etc.

Supply, installation, testing and commissioning of LED type 90w Street light luminaries including LED lamp etc all complete.

Supplying & Fixing out door type CFL luminaire/LED C4185099) With deep drawn aluminium housing anodised inside & clear ac-rylic cover & accessories incl. for 85 watts CFL lamp incl. S&F 32 mm dia GI pipe bracket, clamp, nut & bolts etc.

Distribution wiring in 1.1 KV grade 2 x 22/0.3 (1.5 sqmm) single core stranded ‘FR’ PVC insulated & unsheathed copper wire (Br-and approved by EIC) in suitable size PVC casing-capping (Preci-sion make) with 1 x 22/0.3 (1.5 sqmm) single core strandered ‘FR’ PVC insulated & unsheathed copper wire for ECC, incl. necy,PVC Clips, fittings etc. to light/fan/call bell point with piano keytype Switch (anchor make) fixed on sheet steel fabricated switc-hboard With Perspex/Bakelite top cover on wall incl. necy. Co-nections & Making earthing attachment and mending good da-mages to building works. (PVC cashing and switch board both on surface). Average run 6 mtr.

Supply of Fabricated MS Kiosk made from 14 swg Ms Angle incl. Providing AI busbar of 60 A rating for main supply transmission With proper stamping to be fixed on pedestal as per direction of EIC.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04mts, long & 1 x 4 SWG GI (hot deep) wire (4mts. Long) 13mm dia x 80mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe Protection (1 mts. Long) to be filled with bituminous partly under The ground level and partly above ground level driven to an aver-age depth of 3:65 mts. Below the ground level by TATA medium GI pipe.

Supplying & fixing earth busbar of galvanized (hot dip) MS flat 25mmX 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts,washers spacing insulators etc. as required.

Connecting the equipments to earth busbar including S &F GI (Hot dip) wire of size No 4 SWG on wall/floor with st-aiples buried inside wall/floor as required and making co-nnection to equipments with bolts, nuts, washers, cable lugs etc as required and mending good damages,

Supply, delivery at site and storage of glowing plastic sign boared for identification mark as per direction of EIC.

Erection of glowing plastic sign board for identification mark as per direction of EIC.

Supply & Fixing, Fitting of lighting arrestor/conductor of GI stick of size 1 x 5 mtr long x 25 mm dia with GI flange at bottom of size 75 x 75 x 5 mm thk. With copper discharge points including grouting by cement morter 1:4 as per direction of EIC.

Connecting the equipments/body to earth busbar including S&F 25 mm x 6 mm galvanised (Hot dip) M.S. flat on wall/floor with GI saddles as required and making connection to equipments with bolts, nuts and washers etc.

a) Supply of pump opearator for opearation & minor maintenance of pump house for 180 days (Six months)

b) Contractor’s profit @ 10%

Add GST @ 12% of Part - B

Add CESS @ 1% of Total

msnandyenterprise

bristiconstruction