Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC | L1 | Accepted-AOC Being a lowest bidder and quoted rates are resonable | |
| 2 | L2₹28.4 L+₹4.2 L (17.2%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹28.8 L+₹4.6 L (18.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹29.0 L+₹4.8 L (19.6%)Rejected-Finance 011 NAGAREWADI 612 NAGAREWADI POST PADALI TALUKA SHIRUR KASAR DISTRICT BEED 413249 BEED MAHARASHTRA 413249 UDYAM MH 05 0079863 | BEED | MAHARASHTRA | 413249 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹29.2 L+₹4.9 L (20.3%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
20 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PULGAON
GE PULGAON CAD CAMP
COMPREHENSIVE REPAIR OF CERTAIN BLDG ADM BLOCK AND OTM ACCN AT CAD PULGAON
2022_MES_540774_2
9038/PUL/E8
Open Tender
Civil Works
Item Rate
180 days
GE PULGAON
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE PULGAON
₹50,000
Yes
23 Nov 2022
1 Oct 2022
27 Oct 2022
1 Oct 2022
20 Oct 2022
8 Oct 2022
1 Oct 2022 - 7 Oct 2022
Amount
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
M&L for 6 mm thick asbestos cement corrugated sheet in roofs, walls, etc fixed with L type or J type or cranked hook bolts complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in ridge/flusing board of width or girth not less than 610mm complete all as specified and as directed.
S&F for Rolled mild steel work in main and cross beams, hip and jack rafters, purlin where commected to common rafter and similar work complete all as specified and as directed.
Supply & Fixing mild steel work as in small articles such as Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Dismantling of timber scantlings 40 sq cm and over in section in any position, unframed work complete all as specified and as directed.
Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed works complete all as specified and as directed.
Taking down chowkats or frames with shutters n,exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed.
All as per item No 9.00 but exc 1.50 Sqm but n,exc 4 Sqm each.
Taking down shutters exc 1 Sqm and n,exc 2 Sqm each complete all as specified and as directed.
All as per item No 11.00 hereinbefore but not exc 1 Sqm each
S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed.
Supply and fixing 35mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS : 1003 (Pt I) kiln seasoned and chemically pressured treated complete all as specified and as directed.
S&F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete:but gear operated type with bevel gear box and crank handle complete all as specified and as directed.
S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
S&F in repairs Ball bearing for rolling shutters complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and as directed.
S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F for MS butt hinges 100mm size, medium weight cold rolled mild steel, and fixed complete all as specified and as directed.
Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and as directed.
Supply & Fixing 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed .
Supply & Fixing 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed .
Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed .
S&F 125mm size of aluminum handles, cast type anodised complete all as specified and as directed.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F for MS flat iron hold fasts fixed to chowkats confirming to Fe-310-O etc, complete all as specified and directed.
M & L PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work completed.
M & L Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats.
S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples.
All as per item No 32.00 hereinbefore but fixed in repairs.
S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane.
M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., all as directed..
Taking down cement plaster on brick walls etc, incl racking out joints, hacking for key, scrubbing down with water etc.
M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) WPC shall be measured and paid seperately)
Material and labour for rendering 10 mm thick in CM 1:6 on external surfaces incl dubbing out avreage 10mm thick in CM 1:4 and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt complete all as specified and directed by EIC.
M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over 2mm wall putty to achieve smooth surface complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.
Supply only approved integral water proofing compound complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and as directed including removal of surplus soils/demolished materials not exc 50m and depositing completed.
M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 75mm PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection fair and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed .
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, beddedcomplete all as specified and as directed.
S & F machine cut cudappah stone slab 20.25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and directed .
M&L for 14-16mm thick Green marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as directed complete all as specified and as directed.
All as item No 52.00 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3.
S&F for glazed ceramic tiles coloured of size 50x250x7mm/450x350x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair complete all as specified and as directed.
Demolition of reinfoecement cement concrete in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and as directed including removal of surplus soils/demolished materials not exc 50m and depositing completed.
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade with grey cement and pigment laid over and including 50mm thick sand cushion, joints of tiles filled with dry sand complete all as specified and as directed.
M & L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and fairs complete all as specified and as directed.
M&L RCC 1:1.5:3 Nominal mix using 20 mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
Formwork rough finished flat surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 61.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L 8mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & as directed.
Supply & Fixing in repairs decorative curtain rails with fancy brackets of 25mm dia metre stops, rollers etc complete all as specified and as directed.
S&F 15mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc including taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing complete all as specified and as directed.
S&F 20mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc including taking up or down 20mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing complete all as specified and as directed.
M&L for cutting chases for concealed pipe where required and pointing in cement mortar 1:3 etc, in Brick wall complete all as specified and as directed.
S&F in repairs CP soap dish approximate size 160x160x90mm complete all as specified and as directed.
S&F in repair 15 mm bore dia of Pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, scewed for union pipe and fixed to 15mm dia pipe complete all as specified and as directed.
S&F in repair 15 mm bore dia of Pillar taps Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed scewed for union pipe and fixed to 15mm dia pipe complete all as specified and as directed.
S&F in repair 15mm bore dia of stop valves but fancy type, chromium plated with long shank and cup (concealed type) screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repair 15mm bore dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repair 15mm bore dia of angle valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repairs 15mm bore dia Bib tap chromium plated with crunch or butterfly handle , screwed for iron pipe or for brass pipe and fixed complete all as specified and as directed.
S & F in repair 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete all as specified and as directed.
S & F in repair chromium plated shower rose 125mm size complete all as specified and as directed.
S & F in repairs for 10 ltr capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets complete all as specified and as directed.
S&F in repairs Vitreous china premium/1st quality wash down water closet wall hung EWC white /ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified and as directed.
S&F in repairs Vitreous china squatting pan, ' Orissa pattern, size 580 x 440mm white, with intergal foot rest (excluding flushing cistern and flush pipe complete all as specified and as directed.
S & F in repairs for vitreous china wash basin white flat back, size 580x400mm incl brackets, cutting for and pinning in ends or brackets, incl 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) and waste pipe complete all as specified and as directed.
S&F in repairs tubular towel rail aluminium, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed.
S&F in repairs PVC (SWR) Nahani trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F in repairs CP grating 110mm complete all as specified and as directed.
S&F in repair 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints,laid in trenches complete all as specified and as directed.
All as per item No 88.00 but of 75mm bore
S&F in repair PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.
All as per item No 90.00 but of 110mm bore
S & F rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity confiring to IS specification, incl 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms), and Dismantling PVC/cement water tank n.exc 500 ltrs capacity complete all as specified and as directed.
M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4.
M/S Ramakant Chourasia
Arnav Enterprises
MAHARASHTRA ENTERPRISES
Ankit Construction
M/s VILAS RATAN MENDHE
SHREE CONSTRUCTIONS
RAJ ENTERPRISES
Bidder Name
M/S L M Chourasia
Ankit Construction
RAJ ENTERPRISES
SHREE CONSTRUCTIONS
M/s VILAS RATAN MENDHE
M/S Ramakant Chourasia
MAHARASHTRA ENTERPRISES
Arnav Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .