WBPHED/EE/BMD/NIeT-21 OF 2024-2025/3

Amount

Supply & delivery at site following items:-

Supply, delivery and storage at site Open well submersible pump set coupled with submersible motor suitable for pump having power supply at 415V(±10%), 50(±3%)Hz.having following specification and as per technical specification of NIT. Discharge :- 72 m3/hr. Head:- 50 mwc. HP rating :-20 HP. MOC- Impeller-CI(FG 200), Shaft – SS with Integral Sleeve/ Carbon Steel Shaft with SS Sleeve,Discharge Casing-CI (FG 200).

100 MS pipe class B conforming to IS:1239 PART-1 (2004)

80 mm MS Pipe class B conforming to IS:1239 PART-1 (2004)

100x100x80 mm CI Tee

100x100x100 mm MS Tee

100 mm Blank flange 16 mm thick

100 MS Flange 16 mm thick

80 mm Flange 16 mm thick

100 MS Bend 90 degree

80 mm MS bend 90 degree

80x65 mm Reducer MS

65x150 mm MS Nipple

M.S. suspension clamp with necessary nuts, bolts & washer etc suitable for 80mm dia pipe (Size-300 mm x 80 mm x 8 mm each)

450x450x6 mm mm MS Plate

100 mm Rubber gasket

80 mm Rubber gasket

Pressure gauge (0 – 10 Kg.) 150 mm Ф for Common Header

450mm(H) x 300(L) x 250mm(B) size out door CRCA sheet steel fabricated cubical type kenopy top cable jointing box inside fitted 6 nos100 Amp rated bus bar and hinged type front door and painted powder coated anticorrosive paint as per IP 55 as per direction of E.I.C

80 mm dia single door swing CIDF Non Return Valve conforming to I.S. : 5312, Part-I (P.N. 1.0), Make:IVI/Upadhyay/jupiter.

100 mm dia single door swing CIDF Non Return Valve conforming to I.S. : 5312, Part-I (P.N. 1.0), Make:IVI/Upadhyay/jupiter.

Supply and fixing on wall Pump controller unit comprising of FASD 415 V relay range 20-33A ,wide band coil (200-400v AC) in a sheet steel enclosure with single phase preventor , voltmeter and ammeter . Make-Approved make.(MUG-30 or similar type)

Installation of all items mentioned as in item no 1 to 22 including supply of all erection items, as required for installation of Mono Block pumping machineris at CWR , all valves, delivery pipe line, Motor starter panel , including supplying all necessary items i.e- nut &bolt wather rubber gasket, with painting, jointing of jointing the delivery header with existing Rising main, suporting piller and paining anticorrosive paint etc. including cost of gas cutting, welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specification and upto entire satisfaction of EIC.

Supplying, fittingandfixingPVCpipesofapprovedmakeof Schedule80 (mediumduty) conformingtoASTMD-1785andthreadedtomatchwith GI Pipes as per IS : 1239 (Part-I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fittedwith holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointingmaterialsandtwocoatsofpaintingwithapprovedpaint in any position above ground.

(a) For Exposed Work PVC Pipes 50 mm

Supply and delivery at site 6.0 sq mm 3 core flate submersible cable as per IS :694.Make-Approved make

Supply and delivery at site 16.0 sq mm 3 core flate submersible cable as per IS :694.Make-Approved make

Laying of cable upto 16.0 sq mm submersible cable through 50 mm PVC pipe

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

3 core 6 sq mm

3.5 core 16 sq mm

Making 300mm(W) x 300mm(B) x 900 mm (H) size rising main supporting brick pillar at least 300mm depth from ground level to pumping floor level and neat cement finish all complete as per direction.

Add: 18% GST

Add: 1% Cess

EASTERN INDIA SALES AND SERVICE (BID ID -6323697)

Sarvatah Projects Private Limited (BID ID -6315056)