NCTPS II Civil Maintenance Circle Civil Maintenance Division Repair and Maintenance works to the ESP I control building at NCTPS II

Chipping of concrete including cost of all materials, T&P, lead, lift, etc., complete as directed by site Engineer incharge at site.

Forming "V" groove for half-an-inch width and depth over existing cracks at wall around ESP-I and fill the cracks with Rendroc CS to arrest the entry of water including cost of materials forming "V" groove, labour, lead,lift including scaffolding charges etc., complete.

Providing PCC 1:3:6 using O.P Cement and 20 mm HBG metal including cost of all materials, lead, lift, labour charges, etc., complete.

Plastering with CM 1:4, 12mm thick for brick wall including cost of all materials, T&P, lead, lift, curing etc., complete and as directed by site Engineer incharge of the work.

Removing the Earth and Ash deposits at the Roof of ESP-I with lead of 1 km using tractor including cost of all labour,lead, lift ,etc complete.

Providing two legged scaffolding using 10 to 13 cm dia casuarina props, distance between two rows being 1.25m and spacing of posts being 2m in both rows, with two horizontal posts with 0.50m overlap on either side and braces at 2m c/c including logitudinal and transverse middle braces to step up and providing a platform with C.W.Planks of 40mm thick and 1m width etc., complete using coir and nails.

Inner wall colour washing with Interior Emulsion after through scrapping of old inner wall surface and ceiling applying two coats of Interior Emulsion paint of approved quality including cost of all materials, labour, lead, lift, T & P etc. complete and as directed by the Engineer at site.

Outer Colour washing two coats with Exterior Emulsion of approved quality after through scrapping including cost of all materials, labour, lead, lift, T & P etc. complete and as directed by the Engineer at site including cost of scaffolding.

Painting two coats of synthetic enamel paint for iron works after through scrapping of rest including cost of all materials, Labour, lead, lift, T&P etc. complete and as directed by the engineer at site.

Supplying and fixing in position Anodized aluminum Fixed glazed window in two tracks with frame bottom gutter , 61.85x37mmx1.055kg/m & side /top 62x29.5mmx0.695kg/m and bottom 41x20mmx0.355kg/m , side 39x20mmx0.488kg/m , 6mm wired glass , rubber beading etc including the cost of all materils , labour, lead, lift etc., complete.