REPAIR TO INTERNAL WIRING TO OTM ACCN AT SILA GRN DGRR UNDER AGE(I) CIF(U) REASI.

Amount

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators One light point controlled by one switch

Description all as per item No 02 here-in-before but one 3 pin socket otutlet, 5 amps, independent, with cables 1.5 sq mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing, Make- Finolex/Havells/Polycab

Description all as per item No 02 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing Make- Finolex/Havells/Polycab

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as One light point controlled by one switch.

Description all as per item No 06 here-in-before but one 3 pin socket outtlet, 5 amps, independent, with cables 1.5 sq mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing. Make- Finolex/Havells/Polycab

Description all as per item No 06 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing Make- Finolex/Havells/Polycab

Description all as per item No 06 here-in-before but One 5 pin socket out let, 15 Amps, independent, with cables 2.5 sq mm size and 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing Make- Finolex/Havells/Polycab

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F switch piano flush button single pole one way 6 amp complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F switch piano flush button single pole one way 16 amp complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F bell push, flush type, 6 amp 240 volts complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F door bell, AC, 240 volts, single pole complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F ceiling rose 3 plates polycarbonate body complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of 2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

Description all as per item No 19 but size is 2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 and plastering 10 mm thick in CM 1:4 and 2 coats of white / colour washing to match the surface complete.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

S&F 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make - Legrand cat ref no 607841 & 408592 or equivalent in Hager or Schneider as approved.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways. Make - Legrand cat ref no 507610 or equivalent in Schneider or Hager as approved.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways. Make - Legrand cat ref no 507611 or equivalent in Schneider or Hager as approved.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 12 ways. Make - Legrand cat ref no 507612 or equivalent in Schneider or Hager as approved.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN, 415 volts, 4 ways. Make - Legrand cat ref no 507670 or equivalent in Schneider or Hager as approved.

S&F MCBs of 'C' series having breaking capacity 10 KA,Single pole 6 to 32 amp , Make - Legrand cat ref no 408587 to 408595 or equivalent in Schneider or Hager as approved.

S&F MCBs of 'C' series having breaking capacity 10 KA,Double pole 10 to 32 amp , Make - Legrand cat ref no 408631 to 408636 or equivalent in Schneider or Hager as approved.

S&F MCBs of 'C' series having breaking capacity 10 KA,Double pole, 40 to 63 amp. Make - Legrand cat ref no 408637 to 408639 or equivalent in Schneider or Hager as approved..

S&F MCBs of 'C' series having breaking capacity 10 KA,Four pole 40 to 63 amp. Make - Legrand cat ref no 408700 to 408702 or equivalent inSchneider or Hager as approved.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Philips cat ref no.( BN 021 LED25S 6500 PSU GR S1 )" or equivalent in other specified make as approved.

S&F LED fixture 10 watt including connection all as per Philips LED cat ref no. BN 021C LED20S PSU CDL/NW GR or equivalent in other specified make as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips cat ref no. WT202W LED6S PSU S1 PC or equivalent in other specified make as approved.

S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. Make - Philips cat ref no. RC365B LED33- 6500 PSU OD WH or equivalent in Wipro or Havells as approved.

Supply and fixing onload change over switch with enclosue, 4four pole 125 amps, 440 volts incuding making all incoming and out going connections and fixing on wall /Pane/Polel complete all as specified. Make: Havells Cat part No.IHCFNFO00040 OR equivalent in L&T/Standard as approved.

MAMTA ENTERPRISES

SHANTI ENTERPRISES

VARDHMAN INTERNATIONAL

DEV RAJ MAGOTRA