Maintenance work in Bus stand near Shopping Complex North Side at Ward no 25 in Karumathampatti Municipality

Amount

Dismantling Mud / Sun Dried Brick Walls under 3m high Pwd sor W-0011 P.no:21

Dismantling RCC by manual / by using deploying machineries including Cost and Conveyance Pwd sor W-0035 P.no:22

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Wiring with 2x1.5sq.mm.(22/0.3)PVCinsulated SC unsheathed copper conductor of1100VgradeinsuitablePVC rigid pipe on wall andceiling with PVC accessories and withTWswitchboxand5AFTswitchwithpainting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) SD-17

Wiring with 2x1.5sq.mm.(22/0.3)PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with150mmx100mmx113mmTWswitchbox with3mmthickhylemsheet cover for5A3pinnon inter locking wall socket with 5A flush type switch with continuous earthwire connection of 14SWGTCwire and making good of the concealed portion with suitable colour for concealed PVC plug point SD-39

Supply and Fixing of 20W 4 Feet LED Fitting with LED Higher end

Add GST @ 18%

NMS ENGINEERS (BID ID -1118131)