Repair to all type of Wooden, steel furniture and repair to Sofa Set, Painting/ Polish to all type of furniture at Mil Stn Beas and Suranussi under GE Kapurthala.

Amount

REPAIR & PAINTING TO CHAIR CB STEEL WITH ARMS Removing of old unserviceable bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nut and bolt complete all as specified and directed. FD-75(M)

All as per Srl item No 1 above but back of Seat. FD-75(M)

Removing of old unserviceable arms and S&F new arms rest of teak wood including polishing complete all as specified and directed. FD-75(M)

M & L for Painting of one coat of synthetic enamel paint OG to chair complete incl preparation of old painted surface complete all as specified and directed. FD-75(M)

S&F mild steel flat iron 15 x 3x 500mm at front and rear side for stay of seats with two holes for fixing of seat duly welded and painted with two coats of synthetic enamel OG paint over a coat of red oxide primer complete all as specified directed.FD-75(M)

M&L for welding to chairs where required n.exc 2.5 cm in length complete all as specified and as directed.

M&L replacement of PVC caps on 25mm conduit pipe of chairs complete all as specified and directed FD-75(M)

REPAIR & PANTING TO CHAIR CB STEEL WITH OUT ARMS Removing of old unserviceable bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nuts, and bolts, complete all as specified and directed. FD-75(M)

All as per Srl item No. 8 as above but back of seat FD-75(M)

S&F in replacement PVC caps on 25mm conduit pipe of chairs complete all as specified and directed. FD-75(M)

S&F mild steel flat iron 15 x 3 x 500mm at front and rear side for stay of seats with two holes for fixing of seat duly welded and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. FD-75(M)

M&L for welding to chairs where required n.exc 2.5 cm in length complete all as specified and as directed. FD-75(M)

S&F in replacement PVC caps on 25mm conduit pipe of chairs complete all as specified and directed. FD-75(M)

REPAIR & PAINTING TO TABLE 900X600X760 MM STEEL WITH AND WITHOUT DRAWER Removing of Unserviceable top of the table and S&F new top of the table made out of 18mm thick prelaminated MDF Board with PVC edging around complete all as specified & directed. FD-1007/1008

Removing of old unserviceable legs /stiffener and S&F new legs / stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete all as specified and directed. FD-1007/1008

M&L for painting of table with drawer with one coat of synthetic enamel paint over a coat of complete all as specified and directed. FD-1007/1008

All as per Srl items 16 above but table without drawer. FD-1007/1008

Repair to broken drawer complete all as shown on Drg and specified and directed.FD-1007/1008

M&L for welding to the table where reqd n.exc 2.5cm in length each complete all as specified & directed. FD-1007/1008

S&F hard rubber shoe of best approved quality (as per existing size) specified and directed FD-1007/1008

REPAIR & PAINTING TO ALMIRAH STEEL LARGE Removing of old unserviceable shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position complete all as specified and directed. FD-1031

M&L for welding to steel Almirah large where required not exceeding 2.5cm in length of all as specified and directed. FD-1031

Removing of old unserviceable / broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and specified and directed. FD-1031

Removing of old unserviceable locks and S&F new locks to steel almirah large best quality (as per existing size) as approved by GE omplete all as per Drg and specified and directed. FD-1031

All as per Srl item No 47 above but CP handle (as per existing size) FD-1031

Removing of old unserviceable paints and painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all as specified and directed. FD-1031

REPAIR & PAINTING TO ALMIRAH STEEL MEDIUM Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as specified and directed. Fd-1032

M&L for welding to steel Almirah where required n.exc 2.5 cm in length complete all as specified and directed. Fd-1032

Removing of old unserviceable / broken legs and S&F new legs out of 1.00 mm thick PBI Sheet complete all as shown on drg and specified and directed. Fd-1032

Removing of old unserviceable locks and S&F new locks to steel Almirah best quality (as per existing size) as approved by GE complete all as per drg and specified and directed. Fd-1032

All as per Srl item No 35 above but CP Handle Fd-1032

Removing of old paints and painting of steel Almirah medium with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and directed. Fd-1032

CHAIR EASY Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drg, as specified and directed FD-17/229

All as per Srl item No 08 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning. FD-17/229

All as per Srl item No 08 above but back bottom size- 480 x20 x100mm. FD-17/229

All as per Srl item No 08 here-in-before but stiffener of sizes 50 x 25 x 500mm. FD-17/229

All as per Srl item No 08 here-in-before but arms of size as shown on drg. FD-17/229

M&L for melamine polishing to chair easy complete all as per drg, as specified and as directed. FD-17/229

Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified. FD-17/229

TABLE CENTRE Replacement of old unserviceable top by providing new 18/19mm thick MDF board commercial pasted with laminated sheet teak faced 1mm thick including 3mm thick teak wood edging all round complete all as per drawing, as specified and as directed FD-274

Replacement of old unserviceable legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and as directed and as specified. FD-274

All as per Srl item No 16 above but long rail. FD-274

All as per Srl item No 16 above but short rail. FD-274

M&L for melamine polishing to table centre complete all as shown on drg, as specified and as directed FD-274

TABLE PEG Replacement of old unserviceable top by providing new top of 18/19mm thick MDF board commercial type pasted with 1mm thick laminated sheet teak faced including 3mm thick teak wood edging all round complete all as directed, as specified and as shown on drawing. FD-277/384

Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and as directed and as specified. FD-277/384

All as per Srl item No 21 above but long rail. FD-277/384

All as per Srl item No 21 above but short rail. FD-277/384

M&L for melamine polishing to table peg complete all as shown on drg, as Specified and as directed. FD-277/384

TABLE DINNING 6 Person Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging around complete all as shown on drg as Specified and as directed. FD-273

Replacement of old unserviceable leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, as specified and as directed. FD-273

All as per Srl item No 26 above but top long rail. FD-273

All as per Srl item No 26 above but top short rail. FD-273

M&L for malemine polishing of table dinning for 6 persons complete as shown on drg, as Specified and as directed. FD-273

CHAIR DINING Removing of old unserviceable front leg & S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, as specified and as directed. FD-1105 & FD-228

All as per Srl item No 55 here in before but rear leg -ditto-. FD-1105 & FD-228

All as per Srl item No 55 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning FD-1105 & FD-228

All as per Srl item No 55 here-in-before but stiffener -ditto- FD-1105 & FD-228

M&L for malemine polishing of chair dinning complete all as per drg, as specified and directed.FD-1105 & FD-228

Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified. FD-1105 & FD-228

CHAIR WRITING Replacement of old unserviceable front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg, as specified and as directed. FD-250/280

All as per Srl item No 61 above but rear leg. FD-250/280

All as per Srl item No 61 above but seat frame & S & F new seat frame bottom made of 1st class hard wood (Shisham) duly cane hole size and shape as shown on drg, as specified and as directed FD-250/280

All as per Srl item No 61 here-in-before but stiffeners -ditto-

All as per Srl item No 61 here-in-before but arms. FD-250/280

M & L for malemine polishing of chair writing complete all as per drg, as specified and directed. FD-250/280

Re canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and as specified. FD-250/280

TABLE 900 X 600 X 760 MM WITH OR W/O DRAWERS Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated particle board natural teak shade including 3mm thick teak wood edging all round complete all as shown on drg as specified and as directed. FD-223, 224

Replacement of old unserviceable leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, as specified and as directed. FD-223, 224

All as per Srl item No 68 above but top long rail. FD-223, 224

All as per Srl item No 68 above but top short rail. FD-223, 224

All as per Srl item No 68 above but stiffener. FD-223, 224

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick pre-laminated particle board natural teak shade at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and as directed and as shown on drawing. FD-223, 224

M&L for melamine polishing to table 900X 600X760mm without or with drawer complete all as specified, as directed and as shown on drawing. FD-223, 224

TEAPOY Replacement of old unserviceable top by providing new top of 18/19mm thick pre-laminated particle board natural teak shade including 3mm thick teak wood edging all-round complete all as per and as directed FD-278

Replacement of old unserviceable legs with new Shisham wood legs duly smoothed, size and shape as shown on drg, as specified and as directed. FD-278

All as per Srl item No 75 above but long rail. FD-278

All as per Srl item No 75 above but short rail. FD-278

M&L for melamine polishing to table Teapoy complete all as shown on drg, as Specified and as directed FD-278

TABLE BED SIDE Removing of old unserviceable legs with Teak wood (MP) leg 40 x40mm duly smoothed, size and shape as shown on drg, as specified and as directed. FD-276

All as per Srl item No 81 above but top fixing new top 12mm thick teak wood size- 450 x230mm wide complete all as per drg, as specified and as directed. FD-276

Removing of old unserviceable back 6mm thick plywood and fixing new 6mm thick plywood commercial complete all as per drg, as specified and as directed. FD-276

Removing of old UNSV Bottom teak wood and New bottom teak wood all complete all as per drg, as specified and as directed. FD-276

M&L for melamine polishing to Table bed side complete all as per drg, as specified and as directed FD-276

BED PLYWOOD TOP Removing of old unserviceable head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood including 4 Nos FMN clamps and polishing complete all as specified as shown on drg and as directed FD-246

All as per Srl item No 86 above but foot board complete. FD-246

Removing of old unserviceable long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and as specified and as directed FD-246

Removing of old unserviceable top and S&F new top of 12mm thick ply wood commercial with screws as directed by Engr-in-charge. Plywood shall be ISI marked and shall be of Make - Duraply/Kitply/Century/Greenply/Archid. FD-246

S&F in replacement MS clamps of size 40mm width x4mm thick x 300mm long manufacturing in L shape incl 2 holes on both sides for fixing to locking the head/foot board with long rails complete all as specified and as directed FD-246

CHAIR VARANDAH Recanning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to Chair Varandah complete all as specified and directed (Painting to chair will be carried out before recanning) FD-256

S&F hard rubber shoes suitable for chair Varandah complete, all as specified and directed. FD-256

M&L for welding to Chair Vareandah where required n.exc 2.5cm in length complete all as specified and directed. FD-256

Side Board Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge FD-1112

Removing of old unserviceable frame long rail and supply & fixing new long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge FD-1112

Removing of old unserviceable back & supply & fixing new back made out of commercial ply wood 6mm thick confirming to ISI complete all as specified & as directed by Engineer-in-Charge.FD-1112

Removing of old unserviceable top of side board s & F new top made out of pre-laminated particle board 18mm thick natural teak shade (Exterior gde) confirming to ISI provided with 4mm thick beading of teakwood on exposed edges complete all as specified & as directed by ENgineer In Charge. FD-1112

Removing of old unsv knob & S & F new M.S. Knob 25mm dia dark brown coloured complete all as specified & as directed by Engr In Charge. FD-1112

Smoothening of all exposed surfaces of side board to direct vision and applying two coats of French polish except pre-laminated melamine faced particle board complete all as specified. FD-1112

TABLE DRESSING LADIES WITH MIRROR Removing of old unserviceable top & supply & fixing new top with MDF Board 18mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge FD-378

Removing of old unserviceable bottom & supply & fixing new bottom made out of ply wood one side teak face 18mm thick complete all as specified & as directed by Engineer-in- Charge. FD-378

Removing of old unserviceable both sides of table & supply & fixing new sides with MDF Board 12mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade complete all as specified and as directed by Engineer-in-Charge FD-378

Removing of old unserviceable back & supply & fixing new back made out of plywood commercial 6mm thick confirming to ISI complete all as specified & as directed by Engineer-in-Charge. FD-378

Removing of old unserviceable ply wood of drawer & supply & fixing new ply wood commercial 4mm thick conforming to ISI complete all as specified & as directed by Engineer-in-Charge. FD-378

Removing of old unserviceable knob & supply & fixing new M.S. knob 25mm dia dark brown coloured complete all as specified & as directed by Engineer-in-Charge. FD-378

Removing of old unserviceable glass and supply & fixing new sliding glass 4mm thick with aluminum channel, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge FD-378

Removing of old unserviceable mirror and supply & fixing new looking mirror for table dressing gents (size 1220x360x5mm) thick electro copper plated duly fixed in shisham wood frame and back side covered with plywood commercial 4mm thick conforming to ISI, wooden frame shall be French polished complete all as specified and as directed by Engineer-in- charge. FD-378

Smothening of old & new external surfaces with sand paper removing of balck sots and matching of the newly fitted components with original shade by polishing the complete with french polish as approved by Engineer-in-Charge FD-378

REPAIR & PAINTING TO TEAPOY VERANDAH Removing of old unserviceable top and S&F new top made out of 18mm to 20mm prelaminated MDF board with PVC edging around complete all as per drg and as specified and directed. FD-255

M&L for two coats painting of synthetic enamel paint, white shade including preparation of old painted surface complete all as per drg and directed and as specified. FD-255

M & L for welding of steel frame where required n.exc 2.5 cm in length complete all as specified and directed. FD-255

S&F PVC shoes fixed on 20mm dia conduit pipe complete all as specified and directed FD-255

Replacement of USV Plywood top of Charpay GI Pipe Removing of old unserviceable Plywood (BWR) grade from charpoy and tightening of complete charpoy and S&F of new plywood (BWR) size 2000 x 900 x12 mm thick on the charpoy as directed by Engr-in-charge. Plywood shall be ISI marked and shall be of Make - Duraply/Kitply/Century/Greenply/Archid. FD-220

Repair to Sofa Set Removing of old unserviceable front & Rear leg & supply & fixing new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable hand rest & supply & fixing new hand rest made of Ist class hard wood (shisham) duly smoothed of size 730x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable seat frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 650x100x35 mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable seat frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 1650x100x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable seat frame short rail and supply & fixing new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 580x100x350mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable seat frame short rail and supply & fixing new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 600x100x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable back frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 510x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable back frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 1510x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable back frame short rail and supply & fixing new back frame short rail made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable back frame short rail and supply & fixing new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 450x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable batten for back frame and supply & fixing new batten for back frame made of Ist class hard wood (shisham) duly smoothed of size 500x50x25mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable batten for seat frame and supply & fixing new batten for seat frame made of Ist class hard wood (shisham) duly smoothed of size 580x50x20mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable stiffner for seat supply & fixing new stiffner seat made of Ist class hard wood (shisham) duly smoothed of size 450x40x40mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable stiffner for seat supply & fixing new stiffner seat made of Ist class hard wood (shisham) duly smoothed of size 1510x40x40mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable stiffner for back supply & fixing new stiffner back made of Ist class hard wood (shisham) duly smoothed of size 520x50xc30mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Removing of old unserviceable stiffner for back supply & fixing new stiffner back made of Ist class hard wood (shisham) duly smoothed of size 1510x50x30mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge FD-373

Smoothing of external surface of sofa (Five Seated 3+1+1) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish as approved by Engineer-in-charge.

Supply only cushion of foam size 500 x 525 x 100mm of density 32 with cover of cloth tapestry duly stitched, tapestry cloth should not be less than 135.00 per mtr Make Kurlon/sleep well

Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality qas approved by GE

G S Builders