REPAIR TO JOINERY SANITARY SAND STONE FLOORING WALL TILING FALSE CEILING AND AC SHEET ROOF IN CAMP AREA KHERIA AGRA

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5 sqm & n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified and directed.

Refixing old shutter in same opening exc 1.00 sqm and n.exc 2 sqm in each complete all as specified and directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, and stee peg stay, complete with glazing bars, dovetailed or welded complete complete all as specified and directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, and stee peg stay, complete without glazing bars, dovetailed or welded complete complete all as specified and directed.

S&F steel ventilators centre hung shutters including two pairs of brass cup pivots, catches spring and pully wheel complete all as specified and directed.

S&F chimney bars (straight or camber), bearing bars, tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 30mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F 35mm th 2nd class Hard wood (Sal, Bijasal, Hollock) kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/ gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification & drawing.

S&F fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing.

S&F for framed work as in doors or gates of angle or other sectionwith gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksn and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete.

Supply and fixing wire cloth 0.56 mm nominal dia of wire and avg. width of aperture 1.18 mm complete all as specified and directed.

Supply and fixing in repair wire cloth 0.56 mm nominal dia of wire and avg. width of aperture 1.18 mm complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel butt hinge complete all as specified and directed.

S&F in repair 100 mm long medium weight, cold rolled mild steel butt hinge complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 125mm size complete all as specified and directed.

S&F mild steel 250 mm long sliding door bolt plate type, stove encmelled black, with brigth bolt not less 12mm dia with and including a minimum of 6 bolts and nuts etc complete all as specified and directed.

Hacking out old broken glass any thickness size, quality or description from wooden frame glazed with puty or fixed with beads complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed.

M&L for preparation of new wood surface of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enemal paint over one coat of red oxide primer all as specified and directed.

M&L for welding in repairs n. exc 2.5cm in length thickness of metal n.exc 6 mm complete all as specified and directed.

S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-o complete all as specified and directed. .

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in cill, step and for inserting hold fast of doors and windows including necessary formwork, if required complete all as specified and directed.

Easing and adjusting of steel window/ ventilators including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.

Easing and adjusting of steel door/gate including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.

S&F IInd class hard wood small fillings such as brackets of any type latch and hinge block, shaped door & windows stopes and the like including all necessary labours articles n.exc 200 cucm each complete all as specified and directed.

Supply only 50 mm butt hinges medium weight cold roled mild steel complete all as specified and directed.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

S&F in repairs 150mm long M.S tower bolt stove enamelled black with bright bolt etc complete all as specified and directed.

S&F in repairs 150mm long aluminium anodised complete all as specified and directed.

S&F in repairs M.S sliding door bolt, 250mm long complete all as specified and directed.

S&F in repairs M.S handle 125mm long complete all as specified and directed.

S&F in repairs aluminium handle 125mm long complete all as specified and directed.

S&F in repair Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate fixing either by welding or by screwing to Iron/steel/wooden/PVC frames complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and rubbish off the premises.

M&L for brick work in CM 1:6 using sub class 'B' old size bricks straight or curved on plan exc 6 mean radius complete all as specified and directed.

M&L for brick work in CM (1:4) with sub class ''B” old size bricks, straight or curved on plan exceeding 6M mean radius in half brick thick wall complete all as specified and directed..

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortor 1:4 on fair faces of brick work finished even and fair complete all as specified and directed.

M&L for rendering 15mm thick in cement mortor 1:6 on other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortor 1:3 on surfaces of ceiling finished even and fair complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distember over chalkwhitening complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc. 15cm thickness (below or above ground level) un reinforced complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring 40 mm thick, finished the surface even and smooth with using extra cement in panels complete all as specified and directed.

Supply only 38mm wide glass dividing strips, 3mm thick and inserting as per design complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection 50 mm thick, finished the surface even and fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 mm x 200 mm x 6-7 mm thick on vertical surface of walls such as dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surface of walls such as dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for 30 mm thick rough dressed sand stone slab flooring, bedded and jointed in cement mortar 1:6, 20 mm thick and pointed in cement mortar 1:3 complete all as specified & directed.

Dismantling framed timber scantlings 40 Sqcm and over in section and in unframed work complete all as specified & directed.

Dismantling of fillets, rails post, rafters purlins etc under 40 sqm cm in section etc complete all as specified & directed.

M&L for wooden scantling of 2nd class HW fixed to timber frame work with nails etc complete as in roof, ceiling etc complete of section exc 40 Sqm complete all as specified & directed.

S&F 2nd class HW Wooden for plain fillets, square, rectangular or triangular in section, clean sawn, securednwith nails ornbradsarea exc 13 Sqcm and not exc 25 Sqcm secured with nails complete all as specified & directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets complete all as specified & directed.

S&F plain AC sheet 4mm thick as in ceiling fixed over iron frame or wood frame etc complete all as specified & directed.

Fixing old AC sheet 4mm thick as in ceiling fixed over iron frame or wood frame etc complete all as specified & directed.

M&L for preparation new AC sheet as in ceiling and applying two coats of white wash complete all as specified & directed..

S&F for powder coated G I grid false ceiling with T and angles fixed to wall and hanged to roof with 4mm GI suspender including 4mm thick non asbestos fiber cement bldg disigner board conforming IS-14862 type B cat 3 of oceanic texture and ivory colour of size 595mm x 595mm etc complete all specified

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified & directed.

M&L for 6 mm thick asbestos cement sheet, corrugated or semi corrugated sheets in roofs, walls etc. and fixed with J hook or cranked bolts complete all as specified & directed.

Refixing old 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J hook or cranked bolts

M&L for asbestos cement two-piece adjustabel plain wing ridge 6mm thick fixed with `L' type or `j' type and cranked hook bolt complete all as specified & directed.

S&F of prepainted galvalume aluminium zinc coating GI based plain ridge steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws as complete all as specified & directed.

S&F of prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ cladding to wall fixed with self tapping screws as complete all as specified & directed.

S&F in repair safety lever locks mild steel with 04 lever for rolling shutter complete all as specifed and directed.

S&F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cupboard shutters & shelves and pelmet boxes etc all as specified and directed.

S&F in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) is 30 mm complete all as specified & directed.

S&F in repair curtain rod made out of 25mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm complete all as specified and directed.

S&F in repair mild steel prepainted bracket to hold the curtain rod and fixed to wall (Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and directed.

S & F in repair plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, overall size 1000 mm x 900 mm X 250 mm depth complete all as specified and directed.

Taking down wash hand basin or sink of any size including refixing with MS angle/GI pipe with paint new brackets in the same places complete all as specified & directed.

S&F in repair wash hand basin vitreous china wash basin white flat back size 550 mm x 400 mm including supplied and fixed angle iron brakets errecting stand and CP pillar tap fancy type 1 No,15 mm bore, PTMT waste coupling, PVC waste pipe 32 mm dia, and 01 No 15 mm bore, 450 mm long PVC connection complete all as specified & directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick with plug and washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackt and connacting union to pipe over all size 915x460 mm and bowl size 410x330x160 mm complete all as specified & directed.

M&L for repair vitreous china sqatting pan "Orissa" pattern of size 580 mm x 440 mm white with integral foot rests, P or S trap etc complete all as specified & directed.

M&L for repair viterous china wash down water closet pan pedestal pattern white excluding fixing bolts, flushing cistern & flush pipe complete all as specified & directed.

S&F in repair plastic water closet seat, white ISI Marked, closed pattern with flat bottom and cover and mild steel chromium plated hinges device.

S&F plastic water closet seat, white ISI Marked, closed pattern with flat bottom and cover and mild steel chromium plated hinges device complete all as specified & directed.

S&F in repair PVC health faucet 15mm with PTMT nuts of length 900mm complete all as specified & directed.

S&F in repair coloured toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified & directed.

S & F in repair 10 ltr cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair towel rail 600 mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified & directed.

S&F in repair 100 mm mortice latch with two levers ( vertical type ) aluminium anodised body complete all as specified & directed.

S&F in repair stainless steel grating 100 mm dia with or without access hole complete all as specified and directed.

m/s shanti consruction co

Sethi Brothers

M/s K S Builders

Asha Construction

SAROJ CONSTRUCTIONS

M/s M S Sharma and Co.