Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹81.6 LAccepted-AOC | L1 | Accepted-AOC The L1 bidder bid was accepted by the HRCE Commissioner | |
| 2 | L2₹75.9 L+₹2.6 L (3.59%)Rejected-AOC | L2 | Rejected-AOC The L2 bidder bid was Rejected by the HRCE Commissioner |
Tender Value
₹82.7 L
EMD Value
₹52,000
Closing Date
26 Sept 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive officer
Construction of Devotees Guest House to Arulmigu Moongilanai Kamatchiamman Temple in Devathanaptti, Periyakaulam Taluk in Theni district
Construction of Devotees Guest House to Arulmigu Moongilanai Kamatchiamman Temple in Devathanaptti, Periyakaulam Taluk in Theni district
2023_HRCE_367043_1
01/2023
Open Tender
Civil Works - Buildings
Lump-sum
365 days
A/M Moongilanai Kamatchiamman Temple land
1.Tender must be an hindu religious Person
2.Tender does not against the temple and department
3 documents required · 3 mandatory
₹0
₹52,000
11 Jan 2024
5 Sept 2023
26 Sept 2023
7 Sept 2023
26 Sept 2023
7 Sept 2023
7 Sept 2023 - 25 Sept 2023
Amount
Earth work excavation for foundation in all classes of soils and sub soils and to the depth as may be directed except in hard rock, requiring blasting, including initial leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing the surplus earth within the compound in places shown with initial leads and lifts, clearing and levelling the site, shoring strutting baling of water wherever necessary etc., complete complying with standard specification.
Supplying and filling with M.Sand and Gravel mix in 1:3 ratio, filled up in 75mm layers with moisture percentage of 18% including cost and conveyance of Quarry Dust, gravel and all labour charges for filling ramming etc. Complete with standard specifications including cost and conveyance of all meterials and labour charges etc., complete
Supplying and filling in foundation and basement with excavated earth in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Supplying and filling in foundation and basement with Gravel in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Cement Concrete 1:5:10 (one cement five C.S.Sand (M.Sand) and ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc., complete complying with standard specification and as directed including cost and conveyance of all meterials and labour charges etc., complete
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS: 456-2000, using 20mm graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS : 9103 to accelerete, retard setting of concrete, improve workability without impairing strength and durability with about (5 cum) 7730kg. of 20 mm machine crushed stone jelly and with about (3.3cum) 5156kg. of 10. 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of C.S.Sand (M.Sand), but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, virabting with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra, etc. complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Foundation and basement
G.F.Superstructure
I Floor Superstructure
Second Floor Superstructure
Providing form work for centering the soffits of all reinforcement cement concrete surfaces including strutting to the required height with M.S.Sheets of 90 x 60 cm x 10 gauge stiffened with welded M.S angle of size 25 x 25 x 3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Column footing, Grade beam and Plinth beam
Slab, beam, lintel
Column, Sunshade, Sill Slab and Loft
Plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc
Reinforced Cement Concrete 1:3:6 (one cement, three C.S.Sand (M.Sand) and six stone jelly) using 20mm size of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of steel, fabrication of reinforcement, centering, strutting and shuttering and placing the grills in position etc., complete complying with standard specification - Second Floor Superstructure including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fabricating and placing in position M.S. Grills for reinforcement for all RCC works, including cost of rods, straightening, bending, cracking tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., complete and as directed including cost and conveyance of all meterials and labour charges etc., complete
Brick work using III class Country bricks of size 83/4" x 41/4" x 2 3/4" in Cement Mortar 1:6 (one cement and five C.S.Sand (M.Sand) For the following including finishing and curing as directed by the departmental officers etc., complete complying with Standard specifications including cost and conveyance of all meterials and labour charges etc., complete
Foundation and basement
G.F.Superstructure CM 1:6
I Floor Superstructure
Second Floor Superstructure
Brick Partition wall using III class Country bricks of size 83/4" x 41/4" x 2 3/4" in CM 1:3 (One Cement and Three C.S.Sand (M.Sand)) including fixing hoop iron reinforcement if found necessary, laying, finishing and curing, etc., complete including cost and conveyance of all meterials and labour charges etc., complete
Ground Floor Superstructure
I Floor Superstructure
Fabrication supplying and fixing in position CRCA pressed steel Box section 18 gauge pr 1.25 mm thick for door frame section of size 100mm x 50mm x 1.25mm thick with necessary rebate for door shutters of size 35 x 15 mm confriming to I.S. Specification fabricated to the specified door shutters of size with joints properly welded and grinded providing stiffeners with 25 x 3mm M.S flat around the frame at 60 cm intervals providing 3 Nos. M.S clamps with 25 x 3mm flats on either side of doors frame providing bottom tie with necessary holes for tower bolts with stiffeners on inner side providing required number of 125mm I.O hings for shutter properly welded to the frames finishing the door with two coats of good quality red oxide primer fixing the door frame in position and filling inside hollow portion with cement concrete 1:2:4 (one cement two C.S.Sand (M.Sand) and four aggregate) using 20mm gauge hard broken granite machine cushed stone jelly including cost of all materials fabrication and conveyance to the site and as directed by the departmental officers etc. complete.
Supplying and fixing solid core particle board flush shutters of nominal thick of 30/32 mm with necessary T.W internal lipping conforminf to IS2302 with both sides commercial ply 3mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1 no. 200 x 12 mm aluminium tower bolts 1no. 250 x 16mm aluminium aldrops, 2 nos. 150mm D type aluminium door handle and door stopper bush etc, complete as directed by the departmental officers including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing Solid PVC door shutters with frame using 19 Gauge 19 mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm. with suitable rabate for housing the shutter including sliding arrangements including cost and conveyance of all meterials and labour charges etc., complete
Supplying, fabricating and fixing in position of mild steel door with single leaf shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x5mm for shutter frames, fully covered with M.S sheet of 18 Gauge with M.S flat of size 32 x 6 mm for internals stiffners and one number of aldrop, two numbers of tower bolts, holdfasts, hinges, handles etc, including providing one coat of red oxide primer, the rates shall inclusive of coat of all materials labour charges for fixing the door in position by dismantling the masonry, concerete etc. and redoing the same to the original condition duly packed with concrete etc., complete including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125 GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125 GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved by the departmental officers before use on work including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing of M.S grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete including cost and conveyance of all meterials and labour charges etc., complete
Supplying and paving the floor with Double charged Vitrified Tiles of approved quality and brand (colour/Shade shall be got approved by the departmental officers concerned) of size 600mm x 600mm x 8mm in all floors over a base layer of cement mortar 1:3 (One cement and three C.S.Sand (M.Sand)) 20mm thick laid insitu true to alignment and pointed with white cement slurry mixed with colouring pigments at the rate of 0.40kg / sq.m and fixed in position without any air gap in between the tiles complying with standard specification and as directed including cost and conveyance of all meterials and labour charges etc., complete
Flooring with Anti skid Self Designed Colour Joint free rectified Glazed Ceramic Tiles of size 305 x 305 x 8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three C.S.Sand (M.Sand)) base mortar over the existing slab/floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg/sq.m. etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Supplying and paving with Cement based Hydraulically pressed Anti-skid Flooring tiles (Eurocon) with pattern design of size 300 x 300 x 20mm and pointing with white cement mixed with colouring pigments to full depth of tiles including perfectly and neatly finished in all floors. The rate including cost if tiles, taxes, incident charges, transportation charges and labour charges for fixing the tiles, neat finishing the joints, curing, as directed by the departmental officers etc., complete complying with standard specification. The tiles should be got approved by the departmental officers before used on works including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing in position of Rajasthan Kotta Stone Slab of size 2' x 2' and above 20mm thick laid over base layer of cement mortar 1:3, 20mm thick and polished with polishing materials using different grade of corborundum stones italic aid brick oixde so as to make it glossy polishing finishing etc., with machine polishing and as directed by the departmental officers. Kotta slab should be pointed with Cement Mortar 1:3 (One cement and three C.S.Sand (M.Sand)) mixed with black oxide and top ribbed smooth etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Dadooing the walls with best approved first quality colour glazed tiles of 300 x 450 x 8mm set in CM 1:2 (one cement and two C.S.Sand (M.Sand)) 10mm thick and pointed with white cement mixed with colouring pigments and finishing neatly and curing in all floors etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Providing Weathering Course Concrete 8cm thick with 20mm size Broken brick jelly in lime mortar over roof slab including laying, consolidating, finishing etc., complete including cost and conveyance of all meterials and labour charges etc., complete
Finishing the Top of Roof with One course of machine Pressed Tiles 230 x 230 x 20mm in C.M. 1:3 -12mm thick and pointing with the same mortar mixed with Water Proofing Compound, Red oxide etc., complete including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing in position best approved of ISI quality 110mm dia PVC rain water down fall pipes having a pressure of 4 kg/Sq.m including cost of necessary PVC shoe, PVC bend, Grating of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron grating at junction of parapet and the RCC roof slab including finishing neatly etc., complete the rate shall be inclusive of cast of removable iron grating. The PVC pipe shall be fixed in wall with special type of clamps. Special type of "U" clamp at the centre of the pipe line shall be fixed in addition to those for more than 3.0M pipe length complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Plastering with C.M. 1:5 (one cement and five C.S.Sand (M.Sand)) 12mm thick including scaffolding finishing curing etc., complete complying with standard specification and as directed including cost and conveyance of all meterials and labour charges etc., complete
Special Celing plastering and finishing the exposed surface of RCC items of work such as slabs, beams, sunshades, faciam canopy slab, staircase waist slab, landing slab etc., with CM 1:3 (one cement and three C.S.Sand (M.Sand)) 10mm thick including hacking the surface and providing cement mortar nosing, beading fpr sunshade, staircases, steps, landing slabs and finishing, curing, etc., in all floors complying with standard specification as directed including cost and conveyance of all meterials and labour charges etc., complete
Painting the Wall surface with two coats of Plastic Emulsion Paint of approved quality including priming coat over base coat with white cement and as directed including cost and conveyance of all meterials and labour charges etc., complete
Painting New wood work with two coats of best approved quality Synthetic enamel paint over a primring coat with ready mixed primer of approved quality including cost of primer etc., complete in all floors. The rate shall include of all materials brushes,rubbishing, cleaning and scaffolding charges etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Painting New Iron work such as steel doors, windows, ventilators windows bars balustrades etc., with two coats of best approved quality Synthetic enamel paint (over one coat of red oxide paint) over a primring coat with ready mixed primer of approved quality Excluding cost of primer etc., complete in all floors. The rate shall include of all materials brushes, rubbishing, Cleaning and scaffolding charges etc., complete complying with standard specification including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC /12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications and as directed by the departmental officers including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400 mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers including cost and conveyance of all meterials and labour charges etc., complete
Supplying and fixing position PVC Nahani Trap of size 100 x 75 with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (one part of lime, two part of C.S.Sand (M.Sand) and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three C.S.Sand (M.Sand)) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI/PVC pipes, etc., complete complying with standard specification.
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thickness in RCC 1:2:4 (one cement, two C.S.Sand (M.Sand) and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed including cost and conveyance of all meterials and labour charges etc., complete
O SELVAM
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_437668.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .