GE/PNH-56/2019-20

Amount

Taking down chowkhat or frame exc 1.5 Sqm but n. exc 4 Sqm each with shutters (without taking of shutter from the frames) complete all as specified and directed.

Taking down chowkhat or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames) complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed.

Pressed steel frames of size 125x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc, complete all as specified and as directed.

Plain cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in bed block, for embeding of holdfast, filling in pressed steel door frame complete all as specified and as directed.

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkat complete all as specified and directed.

Factory made, 2nd class hard wood, 30 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified.

300mm long alluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding of extruded section ,complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section of 150mm size fixed complete all as specified and directed.

150mm extruded aluminium alloy handles, fabricated type, fixed complete all as specified and directed.

300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors, overall length of cover plate 140mm, complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section of 75mm size fixed complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section of 100mm size fixed complete all as specified and directed.

Mild steel Butt hinges medium weight of size 75 mm cold rolled, complete all as specified and directed.

Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.

100 mm aluminium handles, cast type, anodised, fixed complete all as specified and directed.

Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified and as directed.

Taking down cement plaster on wall of any desription incl racking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed.

Rendering 20 mm thick in cement mortar 1:4 on stone masonry surfaces or other than fair faces of brick work, finished even & smooth without using extra cement, complete all as specified and directed.

Rendering 20 mm thick in cement mortar 1:6 on stone masonry surfaces or concrete, finished even & smooth without using extra cement, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description not other wise described exc.10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of old or previously treated steel surfaces of any description not other wise described exc.10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, not other wise described, exc.10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins etc. under 40 sqcm in section in framed work, complete all as directed.

Second class soft-wood, clean swan, timber framed and fixed, as in scantling including ceiling work complete all as specified and directed.

All as per Serial Item No. 27.00 above but except timber -ditto-

Preparing surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described & treating with creosote oil complete all as specified and directed.

Dismantling corrugated steel sheeting, any gauge, thickness complete all as specified and as directed.

Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with & including L-type or J- type or cranked hooks or screw etc complete all as specified & directed.

Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed including L-type or J- type or cranked hooks or screw etc complete all as specified & directed.

2mm thick, fibre glass reinforced translucent corrugated Sheeting with two corrugation side lap fix with L type or J type or cranked hook bolt, in roof, wall etc complete all as per specified and directed.

Suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 3mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over one coat of primer, fixed as in repairs, complete all as specified and directed. Make:- Everest Industries Ltd or equivalent approved make as approved by GE.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

20 - 25mm thick machine cut kota stone slab of size 600x600mm as in flooring over and including 15mm thick cement screed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing ,complete all as specified and as directed.

Kota stone slab 18-20mm thick in riser or steps, skirting, dado and pillar laid over and including 10 mm thickrendering in cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade fo the slab including rubbing and polishing complete all as specified and as directed.

Glazed ceramic coloured tiles of size 450 mm x 350 mm x 7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be as approved by the GE.

Vitrified tiles 10mm thick light shade (square or rectangular) polished, area of each tiles not exc 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement screed bed 15mm thick in cement mortar 1:4 base complete all as specified. Shade/Colour of tile shall be as approved by the GE.

All as per Serial Item No. 39.00 above but in vertical surfaces such as skirtings etc over & including 10mm rendering in cement mortar (1:4) -ditto-.

50 mm thick PCC (1:3:6), type C-1 (using 20 mm graded crushed stone aggregagtes) as in plinth protection, finished even & smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc.complete all as specified and directed.

Stone walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

All as per item No.43.00 above but except stone

Dismantling pf reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

Reinforced cement concrete 1:1.5:3, type A-1 ( Nominal mix) (using 20mm graded crushed stone aggaregate) as in chajjah etc complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated etc.) sheets in roof covering complete all as specified and directed.

25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregates) as in base in flooring, finished even and rough to receive the top layers complete all as specified and as directed.

Complete removal of existing treatment of old decorated or un-decorated plastered or unplastered surfaces of walls and applying two coats of colour wash, complete all as specified and directed.

75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregagtes) as in sub base of flooring complete all as specified and directed.

Preparing plastered surfaces and applying two coats of colour wash on walls complete all as specified and directed.

Complete removal of existing treatment of old decorated or un- decorated plastered or unplastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer, complete all as specified and directed.

Taking up or down steel tubing & connection including cleaning for or removal from site 15mm bore complete all as specified and directed.

Taking up or down steel tubing & connection including cleaning for or removal from site 20mm bore complete all as specified and directed.

GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and directed.

GI tubing medium grade 20 mm bore with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and directed.

Rotational moulded polyethylene water storage tanks tripple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs incl with 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as in repairs, complete all as specified and as directed.

Bib tap, cromium plated, fancy type, with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, 15 mm bore dia complete all as specified and directed.

Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc fixed as in repairs, complete all as specified and as directed.

Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union, overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, fixed as in repairs, complete all as specified and as directed.

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Chequred cement concrete tiles with chemical resisting coating of size 30cmx30cmx25mm thick factory made, machine pressed, set jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

Factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed. Make: Rajshree / Sintex

Factory made solid panel PVC shutter 30mm thick (stype) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail abd bottom rail : panelling of plain colour pvc sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed. Make: Rajshree / Sintex

40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one ,complete all as specified and as directed.

Mild steel Butt hinges medium weight of size 100 mm cold rolled, complete all as specified and directed.

150 mm aluminium handles, cast type, anodised, fixed complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectagular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including cement screed bed 15 mm thick in cement mortar 1:4 complete all as specified. Shade/Colour of tile shall be as approved by the GE.

Stop valve, long shank and cup ( concealed type) for 15 mm bore pipe, cast copper alloy fancy type, chromium plated, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed as in repairs, complete all as specified and directed.

PVC connection 600mm long 15mm dia fixed as in repairs complete all as specified.

Vitreous china wash down water closet (Pedestal pattern) white, with seat cover with all fittings including connection to drain and to flushing pipe , anti syphonage pipe etc fixed in repairs, complete all as specified and directed.

PVC valveless, syphonic action type, low level flushing cistern 10 litre capacity, white, with PVC flush pipe, inlet, ball valve, float and handle including brackets, fixed as in repairs complete all as specified and directed.

Grating 125 mm size of PTMT. (Minimum weight 40gms) fixing as in repairs, complete all as specified and directed.

Demolition of cement concrete in ground floors and paving (unreinforced) n exc. 15 cm thick, (below or above ground level), complete all as specified and directed.

Roughneing of old concrete surfaces by picking, sweeping clean by using steel wire brush and washing down with water, fanning dust etc and taking down tarfelt and removing demolished material off MOD premises complete all as specified & directed

10mm thick cement plaster on fair faces of concrete surfaces finished even & smooth without using extra cement in cement mortar 1:3 on ceiling/Chajjas/roof projection etc complete all as specified and directed.

75mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

All as per Serial Item No. 82.00 above but fixed to walls -ditto-

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 100 mm pipe complete all as specified and directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm pipe complete all as specified and directed.

75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

100mm bore cast iron bends (any radius) with duck's foot or heel rest, complete all as specified and directed.

75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

75mm dia cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Vitreous china wash basin, white, Oval type, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixing as in repairs, complete all as specified and directed.

Brass CP basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe, fixing as in repairs, complete all as specified and directed.

Brass CP wall mixer 15mm bore for mixing hot & cold water screwed down for iron pipe, fixing as in repairs, complete all as specified and directed.

32mm bore PVC waste pipe suitable for wash basin & Urinal etc. complete all as specified and directed

Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), fixed as in repairs complete all as specified and directed.

Cast iron cowl suitable for pipes of 50 mm bore complete all as specified and directed.

Swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gms), fixed as in repairs complete all as specified and directed.

Corner glass shelves made of with 8mm thick toughend glass, CP rails, CP screws and brackets, fixed as in repairs complete all as specified & directed.

PVC Bathroom cabinet with mirror of size 600mmx450mmx150mm with CP screws and brackets Make -PRAYAG/ Neelkamal/ Commander, fixed as in repairs complete all as specified & directed.

Brass chromium plated soap dish fixed with chromium plated brass screws, fixed as in repairs complete all as specified and directed.

CP brass health faucet with 15 mm dia pipe of Make : Hindware/ Prayag/ Jaqur, fixed as in repairs complete all as specified and directed.

Preparation of old treated steel surfaces of any description not other wise described exc.10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nais complete all as specified and directed.

Preparing new plastered surfaces and applying three coats of white wash on ceiling etc. complete all as specified and directed.

Applying two coats of plastic emulsion paint over a coat of primer on walls including preparation of new surfaces complete all as specified and directed.

Applying two coats of exterior acrylic emulsion paint over a coat of primer after preparation of new wall surfaces complete all as specified and directed.

Raking out joints to random rubble or polygonal rubble uncoursed or brought up to courses masonary and raised pointing to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

Providing, cement concrete type B-1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with gray cement and no pigments over and including 25mm thick sand cushioning layer, complete all as specified and directed.

Rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fasteing, heavy bracket framing (Beam, tee, angle, chanel or flat section), including distance pieces, cleats etc. confirmig to Fe - 290 (Gde E-165) including cutting, welding & necessary fittings such as nut bolt, plate ,complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundations etc. or for shafts, wells, cesspits, manhols, pier holes etc n. exc 10 sqm on plan and not exc 1.50 Metre in depth and getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick each layer complete all as specified.

Removal of excavated material (soil) to a distance n.exc. 50m and deposting where directed at a level n.exc 1.5m above the starting point complete all as specified.

Concrete bed to drain pipes laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested, in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), complete all as specified and directed complete.

Salt glazed stone ware pipe of 150mm bore, grade 'A', laid in trenches and jointed in cement mortar, complte all as specified and directed.

Brick work using sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or stone masonary, surface finished even & smooth without using extra cement mixed with water proofing compound, complete all as specified and directed . (WPC shall be measured and paid separately under respective item)

Supply only liquid waterproofing compound complete all as specified.

TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) n. less than 0.9mm dia ,complete all as specified and as directed.

Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in manhole cover slab, complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately), complete all as specified and as directed.

Construction of Septic tank with cover slab of RCC M-25 (Design mix ) for 25 Users, built in brick work in cement mortar 1:4 ( with top of slab at groung level ) including necessary excavation and earth work in any type of soil, returning, filling and disposal of surplus soil as directed, RCC manholes covers with angle iron welded frame complete,vent shaft with cowl, all as shown on Drawing No.CE/TD-1202/2003 Sheet 1/2 and 2/2 amended upto date and as directed.

Construction of Soakage well 1.8 metre dia and 3.00 metre deep, type D-2 (Using 40mm graded crushed stone aggeregate) in foundation, wall in honey combed brick work in cement mortar 1:4 , Cover slab of M-25(Design Mix), filling with brick Bats , earth cushion on brick lining, top and inlet pipe 150mm dia, Complete all as shown on Drawing No.CE/TD-1202/2003 Sheet 1/2 and 2/2 Amended up to date and as directed.

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Point wiring with two single core, 1.5 Sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm (nominal area) size copper conductor cable, as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC casing capping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, Collers, Bend, PVC Conduits for crossisng etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc for the followings:- One light point controlled by one switch

One fan point (Ceiling and Exhaust) controlled by one switch

One 5 pin, 6 A socket outlet on the same board

One 5 pin, 6 A socket outlet on the independent board.

All as per item No 125.00 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 1.5 sqmm size cable as earth continuity conductor for one 15/20 Amps socket outlet independent -ditto-

Piano type switch, 1 way, 6 Amps, flush type, all as specified and as directed.

Piano type switch, 1 way, 16 Amps, flush type, all as specified and as directed.

Switch socket 5 pin, 6 Amps, flush type, ISI marked complete all as specified and as directed.

Switch socket 2 in 1, 6 pin, 6 and 16 Amps, flush type, ISI marked complete all as specified and as directed.

Ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed.

Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed.

Taking down ceiling fan and re-fixing including making connections and providing wire of suitable size from ceiling rose complete all as specified and as directed.

Taking down exhaust fan and re-fixing including making connections and providing wire of suitable size from ceiling rose complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B-1 as in cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), built- in bus bars complete suitable for 240 Volts, AC, 50 Hz, fixed as in repairs complete all as specified and as directed Make: Legrand (Cat No Cat No 607711)or equivalent in Schneider/L&T/Havells

Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door (IP-43), built- in bus bars complete suitable for 240 Volts, AC, 50 Hz, fixed as in repairs complete all as specified and as directed Make: Legrand (Cat No Cat No 607712)or equivalent in Schneider/L&T/Havells

MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 5-32 amps, Ç'series, complete all as specified and as directed. Make: Legrand /Schneider/L&T/Havells

MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 32-63 amps, Ç'series, complete all as specified and as directed. Make: Legrand /Schneider/L&T/Havells

MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed. Make: Legrand (Cat No 603237)or equivalent in Schneider/L&T/Havells

Point wiring complete with 4 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked in and including PVC Casing Caping of suitable size ISI marked with accessories fixed to the surface of wall / roof / ceiling etc and including PVC/wooden terminal boxes in wall and 2.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for AC point wiring complete all as specified and directed.

Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete all as directed. Make- Havells/CG/Bajaj

Sheet metal enclosure with socket plug top and MCBs single pole and neuteral enclosure with a two pin and earth plug and socket with one signle pole MCBs 20 Amps complete all as directed. Make: Legrand /Schneider/L&T/Havells

1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheated in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular of size 16 sqmm 2 core, fixed as in repairs complete all as specified and as directed.

Dome type angle holder made out of polycarbonate with metal lamp holder ISI marked with back plate fixed on PVC square block with LED 9 watt fixed as in repairs complete all as specified and as directed.

House service bracket (Hook type) complete with 3.00 metre long GI pipe 40mm dia medium grade, 02 Nos bends, mild steel hook and stay, fixed as in repairs complete all as specified and as directed.

LED light fitting, Single tube, 1 x 20 w LED, T8, 230 V (power factor not less than 0.90) box type, CRCA body, bipin holders connector block, etc. complete with all accesssories internally pre-wired, including LED lamp T8 20 W with aluminium heat shrink and connecting up with PVC insulated and sheathed 1100 volts grade, flexible, multistranded 1.0 sq mm copper conductor three core cable, fixed as in repairs, complete all as specified & directed. MAKE: CG cat Part No. DIJB12LT8-20 for fitting & LTT 8-20 watt or equivalent in Philips/Havells.

LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. 1 x 20 w LED, 230 V ( power factor not less than 0.90 ) etc. complete with all accesssories internally pre-wired , including LED lamp 20 W and connectiong up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor cable, fixed as in repairs, complete all as specified. MAKE: Havells/ CG/ Phillips.

Street light fitting 25 watt LED, IP-65 protection, single piece pressure die cast aluminium housing high grade powder coated finish with heat resistant toughned clear cover for lamp and contorl gear compartment with high voltage surge protection device up to 5 KV, prewired including 1.60 mtr. Long 40 mm bore light gade GI pipe mounting bracket made to shape with and including MS clamp of FI 40mmx6mm size with bolts, nuts & washers and connecting to fitting with 3 core 1.5 sqmm PVC insulated cable, fixed as in repairs complete all as specified. Make: Cat part No. LSTP-25-CDL of CG or equivalent in Philips/bajaj.

Heavy duty exhaust fans with Turbo force of 1400 RPM ,single phase of sweep 300 mm, 230V, 50 HZ with all its accessories i.e. louvers, nuts, bolts, washers etc. including makingopening in wall of required size, grouting holes for fixing bolts and making good disturbed surfaces of wall and Including plastering & Painting of wall as per existing all as specified and directed.Make :Havells / khaitan /CG.

Factory made, 2nd class hard wood, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified.

Complete removal of existing treatment of old decorated or un-decorated plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion paint over a coat of primer, complete all as specified and directed.

Deduct credit for demolished/dismantled materials as listed in Schedule of credit.

M/S SAIN CONTRACTORS