SPECIAL REPAIRS TO SQUASH COURT BUILDING NO P-10 AT NOM VARUNA UNDER GE NEW DELHI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness. (below or above ground level)

M&L for 100 mm thick Plain Cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in flooring with alternate panel including necessary formwork, Finishing cement concrete surface even and smooth without using extra cement, adding with fibre reinforcement all as specified and directed by Engr-In-Charge. Note :- Fibre reinforcement shall be measured and paid seperatelly.

(a) Supply only polyester triangular fibres as secondary reinforcement in concrete shall be 6/12mm long with circum circle diameter of 30-35 microns, designed for melting point of 240-260 degree Celsius & having specific gravity 1.34-1.40. These shall be approved makes. (b) Polyester triangular fibres, where indicated, shall be uniformally mixed at the rate of 0.25% (or at the rate as per manufacturer's instructions) by weight of cement.. Mixing shall be deemed to be included in respective main item (like integral water proofing compound)

M&L for cutting groove of 25 mm depth and 5 to 6 mm width grooves in both directions in the concrete within 24 hours of laying the concrete, with a concrete groove cutting machine (hydraulic type having wt 300 kg, manual control system, electric driven, having dimension 1510mm x 430mm x 745mm), after completion of curing period cleaning of grooves upto full depth with groove cleaning machine. after cleaning of groove insert a 6mm thick polyethylene/ polyurethane foam baker rod in the groove with a roller wheel, masking of brown tape on both side of groove to avoid excess spreading of PU, filling polyurethane sealant of SIKA upto 10 mm depth with a chemical injecting gun. wipe of extra material and remove brown tape complete all as specified and directed. Note :- Work shall be executed by authorised manufacturer/ applicaters

M & L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M & L Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M & L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

M & L at points of contact of wood work by chemical emulsion (in oil or kerosene based soluton) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic light shade matte finish tiles 10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) Make :- Kajaria or equivalent in Somany /Johnsion/ Nitco

Ditto all as per above item but in skirting only ditto

M & L Glazed vitrified coloured tiles of 10 mm thick in glossy finish of size 2 x 4 feet (60 x 120 mm) fixed in vertical surface with 10 mm thick backing layer of good quality tile adhesive (MYK Laticrete 325+ / Roff) (qty of water should be mix as per manufacturere's instruction) fix to wall incl cleaning work complete in all respect as specified. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) Make :- Kajaria or equivalent in Somany /Johnsion/ Nitco

M & L Non skid coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC) Make :- Kajaria or equivalent in Somany /Johnsion/ Nitco

M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in sub bsae floor complete all as specified and directed.

S&F 18 mm thick MDF board pre laminated both side (of approved colour) fixed with screws as in storage cabinet/Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 600 Kg /cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary Stainless steel/ brass hardware fitting i.e Piano hinge ,handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and siliding rail in each Cup board complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc incl removing outside MoD land complete in all respect as specified

M&L 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement incl liquid water proofing compound @ 200 ml/bag of cement all as specified. (liquid water proofing compound shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

M&L 15 mm thick cement plaster in CM (1:6) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified.

M&L rendering 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50 mm thick putty complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1 mm thick putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of 1.5 mm thick Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme/ Vectus

S & F 110 mm PVC (SWR) bends any radius complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly) Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

M & L hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm complete all as specified and directed

Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing to store complete in all respect as specified

Taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing to store complete in all respect as specified

S&F 15 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete towall and ceiling or laid in floor complete all as specified and directed.

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed. Make : Prayag/ Sintex/Vectus

S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed.

S&F in repair 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified and directed.

Dismantling 100mm/75mm dia bore cast iron soil, waste and vent pipes including fittings by burning out lead joints etc complete all as specified and directed.

S&F sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors for 100 mm bore complete all as specified and directed.

S&F sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls for 75mm bore complete all as specified and directed.

S&F sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors for 75mm bore complete all as specified and directed.

S&F Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 100 mm bore complete all as specified and directed.

S&F Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 75mm bore complete all as specified and directed.

S&F Cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches for 100 mm bore complete all as specified and directed.

S&F Cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches for 75mm bore complete all as specified and directed.

S&F Cast iron vent cowl for 75 mm bore complete all as specified and directed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided forcomplete in all respect as specified.

M&L 75 mm thick 1:3:6 type C-2 using 20 mm graded stone aggregates as in plinth protection laid in panels surfaces finished even & fair without using extra cement incl all complete in all respect as specified

M&L for providing wooden flooring for Squash court conforming to the requirement, Elastic bearing elements made of spruce, classification I/III, fully planed, with rubber pads. Dimensions: 4000mm x 95mm x 27mm. Counter sub-floor made of spruce, classification I/III, fully planed. Dimension: 4000mmx95mmx17mm. PE foil- Sports floor according to DIN280, part 5, Thickness 0.3mm. Squash Floor staple on to the counter floor. Solid hardwood top layer 3.6mm. SST surface with a special sanding and depth impregnation for Squash. Entire thickness: 12.6 mm, tongue and groove, Dismensions: 2200mmx 180mmx 12.6mm. Floor construction height: approx. 56.6mm, required height on site: 60mm. Note: 1. The rate quoted shall include for carrying out post construction anti termite treatment all around the edges of wall both internally & externally, to ensure that sports flooring is immune to termite attack and dismantlling and removal of existing flooring is also include in the unit qoated rates.

M&L for front panel wall made of 18mm thick high density fibre board to be installed directly on the existing wall by creating a cavity of 20-22 mm between the building and panel wall and it is to be completely filledwith a fire dried sand, granulation 1-3mm and The final surface is finished with 1 coat of primer and 2 coats of coating. The total construction thickness is of 40mm.The front wall panel size should be 4965mm x 6400mm and not more than 6pcs.as specified and directed.

M&L for side panel walls made from 18mm thick high density fibre board to be installed directly on the existing wall by creating a cavity of 20-22 mm between the building and panel wall and it is to be completely filledwith a fire dried sand, granulation 1-3mm and The final surface is finished with 1 coat of primer and 2 coats of paint as per manufacturere instruction. The total construction thickness is of 40mm. The side wall panel size should be 4600mm x 2130mm in diagonal from front height to back side height and in not more than 5pcs as specified and directed.

M&L for glass back wall , glass back wall shall be Free standing Glass Back Wall made of 12mm thick toughened glass with four panels, 1 door, 4 fins, The fixtures and fitting shall be made with of aluminum anodised. (dismantling & removal of existing glass wall is also included in quoted rates) as dicted by Engineer - in -Charge.

M&L for TIN Board of size 6.40 m x0.48mx2 mm thick made from 2mm thick stiffened aluminum in single aluminum sheet and should be made in two parts for easy transportation and installation and Height Adjustable with the range of 48cm or 43cm high and 6.4mtr width. The upper sloping tin profile should be integrated and cover with red tape.as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off the shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sqm but with shutters (without taking off shutters from the frame complete all as specified and directed.

S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed.

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing

S&F 200 mm long brass barrel tower bolts, wth brass screws complete all as specified and directed.

S&F 250 mm long brass sliding door bolt and fixed with brass screws complete all as specified and directed.

S&F Brass butt hinges in 125 mm long type C11 with brass screws complete all as specified and directed.

S&F 150 mm long Extruded Brass handles, fabricated type polished with brass screws complete all as specified and directed.

Supply and fixed Floor door stopper 140mm long of brass body and tongue with hard drawn steel spring, complete all as specified and directed..

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl all required hardware fitments complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F uPVC ventilator with top hung window, with 2 No. openable shutter (01 no. wiremess shutter and other is of frosted/plane glass shutter) with uPVC frame of approved colour and required size incl all required fixtures, fittings and make good complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, coking plateform and other similar situations complete all as specified and directed.

M&L for reinforced cement concrete type B-1 1:2:4 using 20 mm graded aggregates (Nominal Mix) as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like. complete all as specified and directed.

M&L Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces complete all as specified. (Horizontal or sloping surface)

M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for rough finished surfaces complete all as specified.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engr-in-Charge.

S&F in repair Thin Rim Table top basin of size: 360x360x120 mm Jaquar code : SLS-WHT-6905 / AP Royal Bath Sense Code : TT-70-BGE / Somany in white colour with Click clack waste 32 mm size full thread with 130 mm height Colour Rose Gold Jaquar Code: ALD-BGP-727L130 / AP Royal Bath Sense Code : C230-BGE / Somany Code : 272150830011 modern design with Round shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect as specified and directed

S&F in repair SLS-WHT-6953BIUFSM in white colour Rimless, Blind Installation Wall Hung WC (in liew of floor mounted) with UF soft close cover, Hinges and accessories set, Size : 375x520x400 mm, incl single piece slim concealed cistern body in white finish code: JCS-WHT-2400 with installation kit with flush control plate kubix code: JCP-BGP-352415 of colour Blush Gold PVD incl required accessories and fixture, making all connection to make it functional incl make good complete in all respect as specified and directed. Make : Jaquar or equivalent in Kohler/Hans Grohe/ Villeroy and boch

S&F in repair 15mm bore dia Blush Gold PVD (Colour Rose Gold) anglular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code : KUP-BGP-35053PM / AP Royal Bath Sense Code : RGMYAC101 / Somany Code : 272211380151

S&F in repair 15mm bore dia 2 way bib cock with wall flange with colour Blush Gold PVD (Colour Rose Gold) including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make :Jaquar Code: KUP-BGP-35041PM / AP Royal Bath Sense Code : RGMYBC102 / Somany Code : 272211380251

S&F in repair 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Blush Gold PVD (Colour Rose Gold) Jaquar Code: KUP-BGP-35233NKPM / AP Royal Bath Sense Code : RGMYDV103U / Somany Code : 272111380111 with concealed body for single lever basin mixer wall mounted Jaquar code : ALD-CHR-233N / AP Royal Bath Sense Code : RGB2BD101 / Somany Code : 272110050101 incl all required accessories/ fixture to make operation complete in all respect as specified and directed by Engr-in-Charge.

S&F Antique Copper/ Rose Gold Robe Hook complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code: AQN-ACR-7791 / AP Royal Bath Sense Code : RGAC305 / Somany Code : 272151340151

S&F in repair Hand Shower (Health Faucet) with 8 mm dia, 1 meter long flexible tube & wall hook with Blush Gold PVD (Colour Rose Gold) with check nut and washers complete all as specified . Make : Jaquar Code: ALD-BGP-573PD / AP Royal Bath Sense Code : RGC232N / Somany Code : 272151360011

S&F in repair Toilet roll holder with stainless steel flap with (Colour Rose Gold) Blush Gold PVD paper holder complete in all respect complete as specified and directed by Engr-in-Charge. Make :Jaquar Code: AKP-BGP-35753PS / AP Royal Bath Sense Code : RGAC306 / Somany Code : 272151340161

S&F in repair Towel rack 600 mm long with Lower Hangers, Stainless Steel of Colour : Rose Gold complete in all respect as specified and directed by Engr-in-Charge.Make : Jaquar Code: AKP-ACR-35781PS / AP Royal Bath Sense Code : RGAC301 / Somany Code : 272151340181

S&F Towel Towel ring Square (Code : AKP-BGP-35721P) of Colour : Blush Gold PVD complete in all respect as specified and directed by Engr-in-Charge.Make : Jaquar Code: AKP-BGP-35721P or equivalent in Kohler/Hans Grohe/ Villeroy and boch

S&F Soap Dispenser with glass bottle with (Colour Rose Gold) complete in all respect complete as specified and directed by Engr-in-Charge. Make : Jaquar Code: AKP-ACR-35735P / AP Royal Bath Sense Code : S1LS101 / Somany Code : 272151340071

S&F Soap Dish Holder (Code: AKP-BGP-35731PPD) with Colour : Blush Gold PVD complete in all respect complete as specified and directed by Engr-in-Charge. Make : Jaquar Code: AKP-BGP-35731PPD or equivalent in Kohler/Hans Grohe/ Villeroy and boch

S & F in repair PVC connections 15mm size with PTMT steel nuts of length 450 mm complete in all respect as specified and directed.

S&F in repair 32 mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD (Colour Rose Gold) incl required concealed pipe upto trap with required accessories complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code: ALD-BGP-769L300X190 / AP Royal Bath Sense Code : REBT701 / Somany Code : 272150580021

S&F 15mm bore dia Exposed part kit concealed stop cock & flush cock (Colour Rose Gold) Jaquar Code : KUP-BGP-35083KPM / AP Royal Bath Sense Code : RGMYCC101U / Somany Code :272211380201 with fitting sleeve, Operating lever & Adjustable wall flange with seal, with colour Blush Gold PVD incl regular body of concealed stop cock Jaquar Code : ALD-CHR-083 / AP Royal Bath Sense Code : RGB2DV302 / Somany Code : 272150610021 suitable for 15 mm pipe line with protection cap complete in all respect as specified and directed by Engr-in-Charge.

S&F in repair 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified.Make :Jaquar Code OPP-GLD-15037PM / AP Royal Bath Sense Code : RGMYBC101 / Somany Code : 272211380101

Supply and fixed Double Coat Hook with Colour : Rose Gold complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code: AKP-BGP-35761P / AP Royal Bath Sense Code : RGAC305 / Somany Code : 272151340151

S&F Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including provision of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods (The length of each curtain rod will be 1.00 m to 2.50m long) complete all as specified and directed.

S&F Aquamax Exposed part kit of Thermostatic shower mixer with 3-way diverter Jaquar Code: KUP-BGP-35683PM / AP Royal Bath Sense Code : RGALDV112U / Somany Code : 272111370161 with Colour : Blush Gold PVD (Rose Gold), incl Kubix prime bath Spout with wall flange Jaquar Code: SPJ-BGP-35463PM / AP Royal Bath Sense Code : RGMYSP102 / Somany Code : 272211380301 with Aquamax concealed body of thermostatic shower mixer with 3 way diverter Jaquar Code : ALD-CHR-683 / AP Royal Bath Sense Code : RGB2DV302 / Somany Code : 272110050111 Maze overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Sttainless steel ) with rubit Cleaning Syatem Jaquar Code: OHS-BGP-1639PD / AP Royal Bath Sense Code : RGBHRF104 / Somany Code : 272141370021 of colour : (Rose Gold) Blush Gold PVD, incl Maze Metal hand shower 90x90mm Square Shape single flow with rubit cleaning Jaquar Code: HSH-BGP-1655PD/ AP Royal Bath Sense Code : RGBHTS102 / Somany Code : 272220080021, Over head Shower arm 600x25x25 mm Square Shape for wall mounted Showers with Flange Jaquar Code : SHA-BGP-455L600 / AP Royal Bath Sense Code : RGSA108N / Somany Code : 272221360011, Flexible tube for hand shower 8 mm dia & 1.5 M long with nuts (Code: SHA-BGP-549D8), wall outlet with shower hook in square shape (Code: SHA-BGP-566SPD) incl cover plate, adjusting leg, concealed diverter and all required accessories/fixture complete in all respect as specified and directed by EIC

S&F 150mm PTMT square Grating without hole fixed in position over Rain Water Pipe (Min wt 100 gm) /nahani trap with cement slurry complete all as specified and directed.

S&F in repair CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as directed.

(Note for titem No. 53,54,55,56,57)-1. The work shall be executed through specialised agency/authorised applicator registered with World Squash Federaton and all material shall be of make approved by World Squash Federation. The unit rate quoted by the contractor/bidder shall be deemed to be included guarantee peiod of five years from the date of completion. The security deposit amount shall be calculated as per the scale laid down by MES for calculated individual security deposit on the toal amount of said item. 2. The work has to be executed through OEM/ VENDOR REGISTERED WITH WSF /OEM/ VENDOR REGISTERED WITH WSF authorised agency only 3. The contractor must sign bid specific MoU with the OEM/ VENDOR REGISTERED WITH WSF for execution of work through OEM/ VENDOR REGISTERED WITH WSF /OEM/ VENDOR REGISTERED WITH WSF authorised agency. 4. The contractor must submit the copy of the MoU signed with OEM/ VENDOR REGISTERED WITH WSF at the time of submission of bid, failing which his technical bid shall be summarily rejected. (Note :-1 to 97) Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates. (Note :- 1 to 97) If required then the contractor shall make necessary scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions and the cost for the same is deemed to be included in the quoted unit rates.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :

One light/fan/exhaust point controlled by one no, one way 5 Amp switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

All as per item No. 98 here in before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.Make:-RR/Polycab/Havells

Note for item No 99& 100:- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.

S&F in replacement of modular Switch 6 amps, 230 vots, single pole, one way complete all as specified and directed

S&F in replacement of 16 Amp rating modular switch one way one module complete all as specified and directed

S&F in replacement of modular socket out let 230 volts grade 6 Amp - 2/3 pin combined 2 module complete

S&F in replacement of modular socket out let 230 volts grade 16 Amp - 2/3 pin combined 2 module complete

S&F in replacement of ceiling rose 3 terminal / PVC / Polycarbonate, insulated body all as specified.

S&F in replacement of modular PVC plastic MCB protected socket 20 Amps with MCB SP upto 16 Amps 230 volts AC and plug top 20 Amps all as specified and directed by Engr-In-Charge.Cat Part No DHDMCSN0251020 of Havells or equivalent in Legrand/Schneider.

M&L in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed.

S&F in replacement of factory made sheet steel distribution boards, double door, SPN 08 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.

Supply and fixing in replacement of MCB, 240V 10KA, B curve MCB SP 6 to 20 Amps complete with connection all as secified and directed by Engr-In-Charge.

Supply and fixing in replacement of MCB, 240V 10KA, B curve MCB SPN 32 Amps complete with connection all as secified and directed by Engr-In-Charge.

S&F in replacement of LED Tube Lightfitting of 20 Watt 230Volt(size 4 ft),PF>0.95,with 50000 burning hours complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified. Make: Havells / CG/Philips

S&F in replacement of LED Tube Ligh tfitting of 10 Watt 230Volt(size 2 ft) PF>0.95,with 50000 burning hours complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified. Make: Havells / CG/Philips

S&F in replacement of 1x4 fullglow recess mounted LED panel light of 36 W luminaire with,PF>0.95,with 50000 burning hours, high transmitive diffuser suitable for indoor space complete all as specified and as directed. Make Philips / CG/Havells/.

S&F in replacement of aesthetically designed muziris decorative warm white LED pictur light of 10 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 10 W having LED Lamp base complete all as specified and as directed.Model-31402 of Philips or equivalent model in CG/Havells.

S&F in replacement of Building security light fitting 30 watt to be fitted at the pheripheral surfaces of the building including GI bracket of suitable size,fixing with clamp and other connected accessories complete all as specified and as directed MAke:-Crompton/Philips/Havells.

Supply & fixing in replacement of remote controlled Ceiling fan complete with blades,down rods and all connected accessories operating at 230 V with 1200/1400 mm sweep,rated 5 star with brushless direct curent (BLDC) motor,color as per site requirement.Making arrangement for hanging fans to ceiling with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-In-Charge in replacement of old unserviceable/burnout 1200/1400 mm sweep ceiling fans. Note:-The old U/S 1200/1400mm sweep ceiling fan to be deposited to MES store yard in safe custody.

S& F in replacement of metallic body industrial exhaust fan heavy duty of size 600 mm sweep with new metallic body exhaust fan 600mm AC single phase 230 V 50 HZ,900 RPM ,9400 CUM/HR, with blades,frame and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt all as specified and directed in replacement of old U/S exhaust fan of 600 mm sweep size Note:-The old U/S exhaust fan 600mm sweep deposited to MES store yard in safe custody.

S& F in replacement of plastic body fresh air/ of size 200 mm sweep with new plastic body fresh air fan 230mm AC single phase 230 V 50 HZ with blades,frame ,louvers and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt all as specified and directed in replacement of old U/S fresh air/exhaust fan of 200mm sweep size. Note:-The old U/S fresh air fan 200mm sweep deposited to MES store yard in safe custody.

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 6 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified.

S&F in replacement of MCCB 160 Amp adjustable setting type,4 pole, 415 Volts, 36kA complete all as specified.

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed by Engr-in-Charge.

J S CONSTRUCTION CO (BID ID -3476577)