Development of Mahatma Gandhi Park and Parking Area Jaisalmer Electrification works

Amount

Supplying, laying of following sizes of MS "B" Class piping with bends etc. for exhaust including providing suitable structural supporting arrangements at suitable intervals, painting, guide support, expansion joints and SS bellow etc. as required 75 MM (NB)

Supplying and fixing of 75MM thick , mineral wool insulation (of 150kg per cubic meter density)over the exhaust pipes of following diameter including cladding with aluminum sheet of 26 SWG and covering from outside complete as required 75MM (NB)

Supplying and fixing of fuel pipe and gun metal valve with flanged ends including painting supporting necessary hardware etc complete as required for following sizes 10 mm Gun Metal Valve Screw Type

10 NB Class "B" MS ERW Pipes

Supplying, receiving, storing, lying, effecting proper connections, testing and commissioning of the following sizes of 1.1KV grade PVC Insulated copper conductor armoured stranded control cable complete as required and as per specifications 12 core x 1.5 Sq. mm cable

Supplyingand making terminal joints for the following sizes of 1.1 kv PVC insulated copper conductor cable including providing tinned copper terminal lugs, double compression brass cable glands, insulation tape, effecting terminal connections to the equipment complete as required Control cable terminations 12 Core x 1.5sqmm cable termination Note : The rate shall be inclusive of providing necessary consumables including fuel, lube oil etc. for 8 hours trials, testing and commissioning of DG sets and required coordination with other agencies. The quoted rate for above items shall be inclusive of obtaining all the required statutory approvals including Chief Explosive Authority. Cost of diesel to be included for testing, commissioning to the satisfaction of Consultant / Owner.

SITC of pole mounted post top luminaire IP 54 pathway luminaires designed special purpose outdoor luminaire, integral model, totally weather proof aesthetically contoured. The fixture should have overvoltage protection. Body to be of apolypropylene with Fiberglass, UV-Resistant. The fixture achieve light effeciency up to 115lm/W for the luminaire. wattage: 35W LED, Availablecolout temp: 3000/4000/6500k as per requirement Make-ILC/Francesconi/ Delta Light

SITC of LED Surface mounted LED Linear fixture housing made up of extruded aluminum comes in IP 66. the fixture should be designed in such a way that LED are not directly visible which helps in reducing glare and visual confort is maintained. The fixure comes in 36W/m, Colour tempo available is 2700K/ 3000K/ 4000K and multiple beam angle to choose from Make-ILC/Francesconi/ Delta Light

SITC of floor recessed uplighter body made out of SS 316L. The fixure should be completely sealed and maintain IP 67 rating. The fixure upto 6W with asymmetrical light distribution. Color temp available is 2700K/ 3000K & 4000K Make-ILC/Francesconi/ Delta Light

Providing and fixing of IP-65/Ip-66 Protected LED Step light luminaire on existing wall. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing witt low power LEDs of CREE/ NICHIA/ OSRAM / PHILIPS make, System Lumen output of 55Lm/watt Make: PHILIPS, CAT No BWG150 LED50/WW PSU 220-240V IP67

SITC of flexible LED strip light with short pitch LED with a total consumption of approximately 12W/m in 2700K/ 3000K/ 4000K/ 6500K as per consultant requirement. The LED strip should be minimum IP 67 protected and should run on 24V DC. Make: Lucia lighting/ILC/Francesconi

Providing & fixing of IP-65/ IP-66 protected LED focus Light Luminaire on existing wall. Fixture made from powder coated single piece pressure die cast aluminium housing with heat dissipation fins on housing with high Pwer LEDs of CREE/ NICHIA/ OSRAM/ PHILIPS make. Diffuser/ Glass cover for ensuring IP65 protection for lamp & control gear compartment, system Lumen output of 1000-5500 High Power LED. Integrated Driver shall be high effeciency> 85% and in compliance to IEC standards Make: PHILIPS, CAT No BWG310 3xLED-HP/WW 220-240V 12 1N

Supplying, installing, testing and commissioning of AIR HANDLING UNITS (FAN SECTION ONLY) with double skin construction each complete with squirrel cage induction motor (mounted Externaly), centrifugal fan Direct drive and vibrations isolators.Motors shall be suitable for 415 ± 10% volts, 50 cycles , 3 phase AC supply and meeting criterion as per ASHRAE Standered 90.1-2017 and high efficiency(IE2) and External static pressure shall be 25 mm (WC) minimum and Total static pressure shall be check by vendor. Fan-motor assembly (as whole) shall be statically & dynamically balanced to grade G6.3 as per ISO-1940/AMCA 204-3. All AHUS (Fan sections) shall be suitable for outdoor duty. In additional Metalic Filter shall be provided with Fan . Motor shall be outside the air streem. Tag No. Kiosk -2,3 & 4, Kiosk -5,6 &7, Kiosk -8,9 &10, Kiosk -11,12 &13 Description Exhaust, Location Terrace, CFM 6000, Motor (HP) 3, Static Pressure(mm) 40

AIR DISTRIBUTION Conventional Site Fabricated Ductwork Supply, Fabrication, Installation and Testing of sheet metal ducts in accordance with the approved shop drawings and specifications. Ducts shall be fabricated using lock forming machines and shall be in line with IS-655. Maximum Gauge Duct Size 1801 - 2100 mm, Gauge 20

Supply, fabrication, installation and testing the flexible connections constructed of fire resistant double resin sleeve as per the approved shop drawings.

Supplying & fixing of opposed blade volume control dampers in supply air duct collars as per approved drawings and specifications.

Supply, installation, testing and balancing of Powder coated/Anodised extruded aluminium construction. louvers with bird screen for exhaust air as per specifications and approved drawings.

Bidder Name

Amount

Tarun Electric(GSTN-NA)

M/s Lokesh Enterprises Bikaner(GSTN-NA)

Tarun Electric

Tarun Electric