Providing speed breakers in 48 locations at approach roads and fixing 500 Nos. of 3M make reflective road studs and 37 Nos. of Automatic Traffic Red LED blinker light poles at NH 45A, Karaikal.

Amount

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg. per sqm. on the prepared bituminous / granular surface cleaned with mechanical broom.(As per MoRTH specification, 4th Revision)

Providing and laying dense graded bituminous macadam with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, tranporting the hot mix plant to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 507 of MoRTH specification, 4th Revision, complete in all respects - Using grade-II materials.

Providing and laying bituminous concrete with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix plant to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 509 of MoRTH specification, 4th Revision, complete in all respects - Using grade-II material.-Bitumen 60/70

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

Providing and fixing of 3M make refelective road studs of category "A" raised pavements markers made out polycarbonate / ABS moulded body and reflective panels with retro reflective micro prismatie polycarbonate lens capable of providing total internal reflection of the light entering the lens face with retroflectivity and chromaticity values confirming to ASTM D4 280. The reflective raised pavements markers shall also confirm the length, height and width of the body shall not be less than 100 mm, 15mm and 90 mm and base of marker shall be flat with in 1.3mm (3M equivalent). The marker shall with stand a load of 13635 Kg tested in accordance with ASTM D4280 lenses shall be moulded of polycarbonate or methyl methocrylate conforming ASTM D 788. The area of each retro reflective surface shall not be less than 13.0 Sq cm. The slope of retro reflectivity surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table 1 of said MoRTH circular and two cylindrical polymer shanks not less than 20 mm diameter and not less than 30 mm length shall be provided for better anchorage with bituminous grout or epoxy mortar all as per the latest MoRTH circular.

Supplying and fixing automatic traffic red LED high fast blinkers with straight pole of 3" dia, 2.5 mm thick and 18' height including fixing underground upto 2 feet depth using M15 concrete. The pole having 300 mm dia polycarbonate dome, 190 red LEDs high frequency blinker light, Blue blinker delineator including fixing of 1no of 12V 5 Amps SMPS circuit board width on/off timer. The rate including erection and wiring with 2 years warranty and 1 year maintenance period, pole painting - Yellow and Orange.

Bagyalashmi Constructions