IMPROVEMENT TO GUARD REST ROOMS AT AF STN BAMRAULI AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI

Amount

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises complete all as specified.

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level etc complete all as specified and directed.

M&L for Non Skid ceramic tiles coloured (square/ rectagular) area of each tile exceeding 0.09 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finished complete all as specified.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in leveling course etc complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified.

S&F (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete all as specified and directed

S&F (in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device, all as specified and directed

S&F in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan complete all as specified and directed

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms) complete all as specified and directed

M&L (in repair) for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F (in Repair) 15mm dia Bib tap of brass chrominium plated (ISI Marked) fancy type long body fancy bib tap screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle, nippule, washer etc at any size etc complete all as specified and directed.

S&F (in repairs) Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair 15 mm fancy type stop/Angle valve, castcopper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified and directed

Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete all as specified and directed

S&F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed

S&F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed

S&F in repair 110mm PVC (SWR) bends of any radius complete all as specified and directed

S&F in repair 75mm PVC (SWR) bends of any radius complete all as specified and directed

S&F in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete all as specified and directed

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed

S&F in repair extruded aluminium alloy handles, fabricated type, anodised (ISI Marked), 150 mm size complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed with rubber beeding complete all as specified and directed

S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified

M&L for reapair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etc complete all as specified and directed

S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, (ISI Marked) with hard drawn steel spring, fixed in floor complete all as specified and directed

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F for powder coated anodised aluminium frame/shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F in repair for powder coated aluminium anodised three track sliding window weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt etc complete in all as specified and directed.

S&F in repair chromplated Towel rail 600mm long all as specified and directed by Engr-in-charge.

S&F in repair chromplated Towel ring all as specified and approved by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge

S&F Ist class Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints etc complete all as specified.

S&F 30 mm Flush shutters, solid construction, with block board core and playwood face panels, commercial type on both side complete all as specified and directed.

S&F 35mm thick 1st hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including wire cloth etc complete all as specified and directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old treated steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint using Mechanical means complete all as specified and directed.

M&L for Distempering with 1st quality acrylic distemper (ready mixed plastic emulsion) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of 2mm thick plaster of paris putty etc complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall projected face of chajja, projected face of roof slabs & face and sides of sunshade including preparation of surfaces including cornices, plasters etc complete and applying two coat of exterior emulsion paint in pattern (two or mord colour combination) over one coat of alkali resistant priming paint over 1.5mm thick wall care putty complete all as specified and as directed by the Engr-in-Charge. (Note : Design, pattern & colour will be approved by the GE)

M&L for rendering 10 mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement complete all as specified and directed.

S&F rolled mild steel Fe 410 -W (Gde E- 250) quality A in framing of wall clading (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Excavating over areas in hard & dense soil, n exc 1.5 m deep and getting out complete all as specified & directed

M&L for Cement concrete (type B-2 using 40mm graded crushed stone aggregate) 1:2:4 in foundations,filling and mass concrete etc

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing outside the defence area as specified and directed

M&L for preparing new painted steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer etc complete.

S&F in repair concertina coil 600mm dia (in stretched position & weight n. less than 7.5 Kg) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wire razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fasteener clips,steel lug rings etc complete all as specified and directed. Note- (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed.

S&F in repair concertina coil 900mm dia (in stretched position & weight n. less than 10.50 Kg) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (25 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wire razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (18SWG) including all fittings like fasteener clips,steel lug rings etc complete all as specified and directed. Note - (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S V K MEHROTRA (BID ID -3122668)

R.K.ASSOCIATES (BID ID -3131451)

Abhinav Builders (BID ID -3110099)