Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹11.3 L+₹1.5 L (14.8%)Rejected-Finance | L2 | Rejected-Finance Not lowest |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
22 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER ABOHAR
GARRISON ENGINEER ABOHAR PIN 152116
REPAIR / MAINT OF SEWAGE INSTALLATION OF MILITARY STATION FAZILKA.
2024_MES_676185_1
TOKEN NO GE ABH-42/24-25
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
FAZILKA MIL STN
AS PER NIT
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹24,000
Yes
1 Jan 2025
24 Sept 2024
24 Oct 2024
24 Sept 2024
22 Oct 2024
8 Oct 2024
Amount
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 5HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 7.5 HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 10HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 12.5 HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 15HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 20HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 25HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 40HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 5HP/7.5 HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 7.5 HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 10HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 12.5 HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
M&L for disconnecting/dismantlingand taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 15HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. (Make of winding wire shall be ATLAS/Devi dayal / BPL)
Supply & fixing sewage submersible non clog motor & pump set of capacity 10 HP rated RPM of 1440 consists of max solid size of 45, discharge rate/ head of 14 mtrs of voltage rate 380 to 440 volts (three Phase) , max density of <1050 kg/m cub, IP 68 rated with ambient temp of 40 degree centigrade with "B"/"E" class, complete body and impeller casing of cast iron and pump shaft of carbon steel all as specified and directed. Make Kirloskar or eqvl.
Supply and fixing oil seal suitable for 5 HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
Supply and fixing oil seal suitable for 7.5HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
Supply and fixing oil seal suitable for 10HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
Supply and fixing oil seal suitable for 12.5HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
Supply and fixing oil seal suitable for 15HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 5 HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Supply only CI Impellar
Supply only Brash Bush
Supply only Stainless steel shaft
M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 7.5 HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Supply only CI Impellar
Supply only Brash Bush
Supply only Stainless steel shaft
M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 10HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Supply only CI Impellar
Supply only Brash Bush
Supply only Stainless steel shaft
M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 12HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Supply only CI Impellar
Supply only Brash Bush
Supply only Stainless steel shaft
M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 15HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Supply only CI Impellar
Supply only Brash Bush
Supply only Stainless steel shaft
M&L disconnecting/dismantlingand taking out unsv non clog sewage centrifugal pump 7.5HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Gun metal Impeller
Stainless steel shaft
Thrust rod
Distance sleave
Motor Bush
Sealing kit
Thrust plate
Pump coupling stainless with key
Studs & Nuts
M&L disconnecting/dismantling and taking out unsv non clog sewage centrifugal pump 10HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Gun metal Impeller
Stainless steel shaft
Thrust rod
Distance sleave
Motor Bush
Sealing kit
Thrust plate
Pump coupling stainless with key
Studs & Nuts
M&L disconnecting/dismantling and taking out unsv non clog sewage centrifugal pump 12.5 HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Gun metal Impeller
Stainless steel shaft
Thrust rod
Distance sleave
Motor Bush
Sealing kit
Thrust plate
Pump coupling stainless with key
Studs & Nuts
M&L disconnecting/dismantling of unsv non clog sewage centrifugal pump 20HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Gun metal Impeller
Stainless steel shaft
Thrust rod
Distance sleave
Motor Bush
Sealing kit
Thrust plate
Pump coupling stainless with key
Studs & Nuts
M&L disconnecting/dismantling of unsv non clog sewage centrifugal pump 25HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Gun metal Impeller
Stainless steel shaft
Thrust rod
Distance sleave
Motor Bush
Sealing kit
Thrust plate
Pump coupling stainless with key
Studs & Nuts
M&L disconnecting/dismantling of unsv non clog sewage centrifugal pump 40HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately)
Gun metal Impeller
Stainless steel shaft
Thrust rod
Distance sleave
Motor Bush
Sealing kit
Thrust plate
Pump coupling stainless with key
Studs & Nuts
S&F in replacement oil immersed fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 40HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
S&F in replacement oil immersed fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 20HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
S&F in replacement oil immersed fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 25HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 12.5 HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 15 HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
S&F DOL starter 3 phase 415 volts, 50 HZ AC suitable for 5 HP motor & relay range as recommended by manufacturer.
S&F DOL starter 3 phase 415 volts, 50 HZ AC suitable for 7.5 HP motor & relay range as recommended by manufacturer.
Supply & fixing electric driven motor nonclog sewage pump sets AC three phase voltage rated 50Hz frequency , electric driven, supplied and installed complete 20HP 1440 RPM coupled set with HSC pump on base frame complete three phase of head 50 mtrs all as specified and directed. Make : Crompton/Kirloskar/CRI
Supply & fixing electric driven motor nonclog sewage pump sets AC three phase voltage rated 50Hz frequency , electric driven, supplied and installed complete 15HP 1440 RPM coupled set with HSC pump on base frame complete three phase of head 50 mtrs all as specified and directed. Make Crompton/Kirloskar/CRI
Supply & fixing pump only of cap 40 HP with coupling and mounting of base frame 2850 RPM for electric driven motor nonclog sewage pump sets AC three phase voltage rated 50Hz frequency , electric driven, of 40HP 2850 RPM complete three phase of head 50 mtrs all as specified and directed. Make Crompton/Kirloskar/CRI
Material & labour for preparation of complete surface by scrubbing old paint of pumping set incl electric motor & connected pipes of capacity 40HP and applying two coats of synthetic enamel paint etc complete all as specified and as directed by Engr-in-Charge
All as per ser No. 41 above but 25 HP pump set
All as per ser No. 41 above but 20 HP pump set
All as per ser No.41 above but 5 HP pump set
All as per ser No. 41 above but 7.5 HP pump set
Taking up and down CI/DI water mains/sewage pipes (including all fittings) with spigot and socket ends and rubber gasket joints 150mm bore complete all as specified and directed by Engineer - in – Charge.
Supply ,laying jointing,commissioning and testing Ductile iron pipe with spigot and socket end centrifugally cast(spun) class K-7 of size 150 mm dia conforming to IS-8329-2K in any length laid in trenches suitable for rubber push on tyton joints complete all as specified and directed.Make:Electro steel casting/Jindal Saw pipe/Lanco
M & L for cast iron Fittings for spigot and socket pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipes all as specified and as directed by Engineer-in-Charge.
M&L tiighten Joint with rubber or fibre board gasket including removing old rubber tighten Joint for 150 mm Bore of pipes.
Taking out sluice valves, refacing, regrinding and refixing for 150mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F as in replacement of gland packing of sluice valve for 150mm bore or 8mm complete all as specified and as directed by Engineer-in-Charge.
S&F as in replacement of gland packing of sluice valve for 250mm bore or 10mm complete all as specified and as directed by Engineer-in-Charge.
S&F as in replacement of gland packing of sluice valve for 100mm bore or 6mm complete all as specified and as directed by Engineer-in-Charge.
Sluice valve fixed in repair incl repacking stuffing box of sluice valve spindle incl taking apart and reassembling of 150 mm bore all as specified and directed by Engr-in-Charge
S&F "D" Joint with nut and bolt suitable for 150mm bore D I pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
Labour for taking out UNSV non clog submercible pump set including motor for repairing with the help of suitable T&P and refixing after repairing all as specified and directed by the Engr in charge
Dewatering of sewage water from UG sump with the help of suitable pump for getting out unservicable nonclog submercible pump for repairing all as specified and directed by the Engr in charge.
Supply and fixing sluice valve flanged type rating PN 1.6 size 150mm bore conforming to IS14846 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer- in- Charge.
Supplying and fixing as in replacement of reflux (Non -return) valve flanged type rating PN 1.6 size 150mm bore conforming to IS 5312 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 4 core all aspecified and directed
Cleanning the sewage sump well of 5.65 mtr dia and depth exeeding 5 mtr but not exc 7.5 mtr by removing average 30 cum night soil and sediments including liquid by mean of suitable man power who is regularly dealing the same job with safty equipments, tools and safty measure as well as removing depositing the sludege obtained from cleaning out side the defence land and will be deposited in suitable pit all as specified and directed.
M&L for removing Beehives of any nos, size and at upto height of 22 mtrs at one place with in 15 mtr dia with all safety gear while removing hives with precautions at height and ladders required for climbing will carry, all as directed by engr-incharge.
M&L DOL starter 15HP capacity Nos-02 complete all as specified and directed.
M&L DOL starter 20HP capacity Nos-02 complete all as specified and directed.
SHRI RAM TRADING CO. (BID ID -3145436)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .