Special repair to certain toilets of bldg No. P-786 (adm bldg of FCBRNP), improvement to flooring at single offrs accn (two rooms of bldg No. P-159) and provn of flyproof doors at certain or md accn at CME Pune

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n exc 4.0 Sqm each all as directed.

Taking down chowkats or frames, not exc. 1.50 Sqm with shutters (without taking Off shutters from the frames), complete all as specified and as directed.

S&F 2nd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put together with glue pinned at joints supplied and fixed all as specified and directed.

Taking down shutters only of size exc 1.00 Sqm but not exceeding 4.00 Sqm all as directed.

S & F Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed.

M & L Preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed.

M & L Cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

M&L for preparing new wood and wood based surfaces of any description, over 100mm width or girth and applying two coats of synthetic enamel paint (first quality) over a coat of pink primer, complete all as specified and directed.

S&F PVC solid door frame of size 50X47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube as specified manufacturer’s instructions complete all as specified and directed.

S&F for aluminium anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue including taking down existing old window of any description complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L for preparing old wood and wood based surfaces of any description, over 100mm width or girth and applying two coats of synthetic enamel paint (First quality) over a coat of pink primer, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed.

M&L preparing old steel and iron surfaces of any descriptions, over 100mm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S & F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S & F 150 mm Mild steel pressed handles, oval type,stove enamelled black

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire stapes, fixing and repair etc, complete all as specified and directed.

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as specified and directed.

S&F aluminium powder coated fixed partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx44.45mmx1.20mm thick with total height 3.20m. The panels shall be made out of 5mm thick plain /tinted (frosted) glass in top & bottm of 12 mm thick both side laminated particle board (i.e 50-50) including door with acceries i.e floorspring, hydrolic door closer, buttings, handle tower bolt, necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screw etc including making good to the disturbed portion complete all as specified and directed.

M& L For 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

Rounding to edges of stone slabs, such as in steps, cooking plateform, and other similar situation complete all as specified and directed.

M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceedidng 15cm thickness (below or aboved ground level) all as specified and directed.

M&L for 75mm thick PCC type D-2 (1:4:8) using 20mm graded stone aggregate as in sub base etc complete all as specified and directed

M&L For 25 mm thick, type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor/ wall finishes in CM 1:6.

M & L Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed.

M& L for rendering 10mm thick cement mortar in 1:4 as complete all as specified and directed

M&L for glazed ceramic coloured tiles in verticle surface 350mmx250mmx7mm /450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed,

S & F in repairs 15mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees, union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe complete all as specified and directed.

S & F in repairs 20mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe complete as specified and directed by Engr-in-Charge.

Cutting chase, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chasesfor concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all as directed.

Dismantling stone slab and tiles of any description and thickness as in floor including cement mortar bedding and rubbish off the premisses complete all as specified and directed.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed.

S & F in repairs 110 mm dia PVC (SWR) bends any radius, provided with access door complete as specified and directed by Engr-in-Charge.

S & F in repairs PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete as specified and directed by Engr-in-Charge.

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S & F in reparis 75 mm dia PVC (SWR) bends any radius provided with access door complete as specified and directed by Engr-in-Charge.

S & F in repairs PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 75mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

Demolition of brick or stone/boulder masonary, built in cement mortar including all quoins, aarches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for half stall ceramic urinal pastel coloured of size 720x485x310mm (Make - Hindware Cat No. 60006 or equivalent approved make indicated in list of make in tender) including Urinal toughned glass / Marble / Granite including grinding, polishing, rounding/moulding/chamfering edges), brass cp bottle trap, electric operated auto censor / Push cock (Including spraders ) flushing arrangements. (Make Hindware Cat No. 500963 or equivalent approved make indicated in list of makes in tender) complete including taking down old u/s one complete all as specified and directed. Note : 1) Type of partition will be decide by Engr-in-charge as per sitr requriment 2) Type of flushing arrangement will be decide by Engr-in-charge. Note : The rate quoted by the contractor is including the connection push cock & spraders.

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of newly plastered surfaces ceiling and applying complete ceiling with 3mm POP/Birla putty and making smooth surface and applying three coats of white wash over a coat of POP/Birla putty all as specified and directed.

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed.

M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorecent salts and applying complete wall with 3mm POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.

S & F in repair table top wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling chain and plug waste filling union and 32mm dia PVC waste pipe 90cm long, all necessary inlet outlet connections complete all as specified and directed. Make : Hindware Cat No. 10065 or equivalent model in Cera /Parryware/ Neycer as approved by GE.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (including fixing bolts, flushing cistern and flush pipe) including provision of flush pipe , plastic seat cover for pedestal pan and cp health faucet including two way angle cock complete all as specified and directed. Make : cera

M & L for coupled closet (Clover) snow white, size 360x640x685mm, including P or S along with cistern dual flush complete set with soft close plastic seat cover complete as specified and directed including taking down old wash down water closet pan of any description and any size. Make : Jaquar, code SLS-WHT-6851P180PP6E

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F decorative looking mirrior necessary fixing arrangement complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.

S&F in repair For sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stain steel bracket guard and railing 60 cm long etc. complete all as specified and directed.

S&F in repair 15mm dia concealed stop valve chromium fancy type, screwed down, high pressure with crutch or butterfly handle , screwed both ends for iron pipe or for union complete all as specified and directed.

S& F in repair Soap dish holder complete as specified and directed by Engr-in-Charge.

S&F in repair Toilet paper holder

S& F in repair Brass CP mixer for mixing hot & cold water screwed down for15 mm size iron pipe and fixed

S&F vitreous china squatting pan "Orrisa Pattern" size 580x440mm white with integral foot rest (including flushing cistern) but including flush pipe, trap complete all as specified and directed. Make : cera

S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L cement concrete type E-2, 1:5:10 (40 mm graded stone aggregate) lean concrete as in sunkun floor for filling etc. complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sunkun floor complete all as specified and directed.

M&L 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.

Supplied only WPC

M&L bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed.

M&L Polythene film black 50 micron laid in floor complete all as specified and directed.

S& F in repair Wash hand basin mixer complete as specified and directed by Engr-in-Charge.

Vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M & L vitrified ceramic coloured tile 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc. set and jioned in neat cement slurry and poited in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S & fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR part-I, section 8, clause 8.24 (a) complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks of mild steel wire stapes, fixing etc. complete all as specified and directed.

S & F in repair 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunken boxes made of zinc coated pressed steel of required module with cover plate including all, cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light point controlled by one switch

One exhaust fan point controlled by one switch

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

S & F ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S&F switch Modular, one way 6 amps, 1 module complete all as specified and directed.

S&F socket modular 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F White cover plate with frame 3 module complete all as specified and directed.

S&F White cover plate with frame 4 module complete all as specified and directed.

S&F White cover plate with frame 6 module complete all as specified and directed.

S&F White cover plate with frame 8 module complete all as specified and directed.

S&F Decorative ultra slim with aluminium housing warm white environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 22W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make: Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F Decorative ultra slim with aluminium housing warm white environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make: Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F Decorative 18W modern electroplated brass gold body LED wall light mirror vanity picture lamp- warm white complete all as specified and directed.

S & F exhaust fan Supply and fix exhaust fan, steel body AC single Phase. 230V of size 230m sweep with, blades, and frame and louvers including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site also arrangement to mount the fan as per requirement, including taking down old unsv one and depositing to MES store yard for further disposal action complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

M&L for sub main wiring with two run of 4 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 20 mm wide & 4 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

N AND G CONSTRUCTION

Mukund Engineers and Contractors

Aishwarya Constructions