REPAIRS AND REPLACEMENT OF ROLLING SHUTTER IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed.

M&L for false ceiling with 600mmx600mmx4mm thick 'E' board classic of M/S Eternit Everest Ltd or Charminar make as approved by GE, fixed with and including galvanized iron powder coated inverted 'Tee" or 'L' sections (concealed GI frame work) of 'Cicage' metallic or equivalent suspended from ceiling with provision of galvanized iron wire 45 mm dia and self tapping screws including butterfly clips, hold down clips for fixing the boards to frame complete all as pe manufacturer's instructions and all as directed including two coats of oil bound distember on one side of the board. (a) Size of Main Tee- 39x24.7x0.8mm (b) Size of Cross Tee- 29x24.7x0.8mm (c) Size of wall angle - 22.2x22.2x0.65mm (d) Butter fly clip (e) Hold down clip (f) Size of grid 1.22mx0.61m (g) Two coats oil bound distemper one side of board (h) Powder coating on exposed side of tee/ angle.

S&F solid PVC wall lining consisting of 5 mm thick wood grain PVC sheet incl of solvent cement and fixing at site on PVC frame as per specification and drawing .

S&F 5 mm thick PVC sheet fillet of width 35 mm thick wall paneling incl of fixing on to shelter make PVC frame as per specification and drawing.

S&F in repairs any size steel rolling shutters 1.25mm thick including top cover, anchoring rod, hasp and staple erection in position as indicated complete, gear operated type with bevel gear box and crank handle including guide rail, hood cover, MS pipe, spring, lock plate and necessary fittings and fixtures including all necesssary arrangements complete all as specified and directed. Note : Painting shall be measured and paid for separately.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for MS rolled section as in main and cross beams, hip and jack rafters , purlins, where connected to common rafter, post and running rails and guided for sliding doors fixed with angle cleats and other connecting plates complete all as specified.

M&L for framed work as in door or gate of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.