Development of amenities at Basilica of Bom Jesus Old Goa under prasad scheme proposed heritage interception centre under survey no 154/1 part 154/2 part and 154/3 of ella village tiswadi goa

Amount

CIVIL WORKS

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Felling trees of girth(measured at a height of 1. m. Above ground level) including cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 30 cm and upto 60 cm girth

Felling trees of girth(measured at a height of 1. m. Above ground level) including cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :Beyond 60 cm and upto 120 cm girth

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m.(b) Hard Soil

Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in:(a) Ordinary Soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (a) All kinds of soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (b) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.(a) All kind of Soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. Extra for additional depth of 1.5 m or part thereof in: (a) All types of soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.(a) All kind of Soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.(b) All type of laterite rocks and hard rocks

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: (A) All works upto Plinth Level

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement.

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size): All works upto plinth level

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) : (b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) : (c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level

Reinforced cement concrete work (1:1½:3) (1 cement:1½ coarse sand: 3 graded granitic or basaltic aggreate 20mm nominal size)in suspended floors, roofs, landings, shelves and their supports and balconies upto floor five level including finishing and plastering the ceiling with C.M. (1:3) (1 cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding the cost of centering and shuttering

Providing and laying in position ready mixed concrete (RMC) with usage of Ground Granulated Blast Furnace Slag (GGBS) as per IS 12089 and IS456-2000 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the Engineer in Charge.All works upto floor V level

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering and finishing etc.

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.(b) String courses, copings, bedplates, anchor blocks, plain window sills and the like.

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.(e) Moulding in cornices, window sills etc. not exceeding 15 cm girth.

Providing and laying plum concrete in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate 40 mm nominal size) with plums not exceeding 15% of the volume of the finished concrete of size ranging from 150 to 300 mm (but the maximum dimension not exceeding 1/3rd (one third) the least dimension of member under consideration excluding the cost of centering and shuttering:

Providing & Applying Curing Compound ACCURE- R (Resin based curing compound) or equivalent @ 1.82 KG per 10 Sq.m on concrete surface conforming to ASTM: C- 309,BS:7542,BS: 8110 Part 1 complete and as per the direction of

Centering & shuttering including Strutting,Propping & removal of forms for : (i) Foundations, Footings, Bases for columns

Centering & shuttering including Strutting, Propping & removal of forms for : Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering & shuttering including Strutting, Propping & removal of forms for : Suspended floors, roofs landings, shelves & their supports

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarse sand) in foundation upto plinth level Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. (5046+5047)

12mm cement plaster 1:5 (1 cement : 5 fine sand)

6mm cement plaster to ceiling 1: 4 (1 cement : 4 fine sand)

20mm cement plaster 1: 4 (1 cement : 4 fine sand)

Extra for plastering of cornices, mouldings or architraves including neat finish to line and level (a) In one coat

Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand)

Fixing trap metal kadka at junctions of wall/beam/slab with CM 1:4 after chasing/ preparing the surface including fixing 150mm wide PVC chicken mesh, curing, all leads and lifts etc. complete

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon (b) Second class Indian teak wood

Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters. (b) 35mm thick including anodized aluminium butt hinges with necessary screws:

Providing & fixing 30mm thick Wood Plastic Composite (WPC) door shutters decorative type, of approved design/make including providing 4 numbers SS butt hinges 100x 58x1.8 mm as approved, SS screws as approved by the Engineer-in-charge. All leads, lifts,labour, material, tools, plant, etc. complete.

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.

Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supportingframe with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.(b) Ornamental Grill

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm (average) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. Jet Black

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. Cherry Red

Providing and fixing Vitrified matt finished(600x1200) of Somani,Kajaria or approved brand of material and 10mm thick in floors , treads of steps, landings on 25 mm thick bed of cement mortar 1 : 3 and jointed with cement slurry complete.

Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Cherry Red

Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required.

Providing and fixing white vitreous china type water closet squatting pan (european type w.c. pan) with flush valve Nelson/ similar) fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccu.m breaker coupling etc. including cutting making good the walls and floors where required.

Providing & Fixing of Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured of 0.6mm thick Aluminium Clip-in perforated 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling stages in the manufacturing process. Tile ends shall be raised with pips and stops to ensure positive engagement into the spring to enable for de-mounting of individual panels. The Tile sides shall be sufficiently high to ensure a minimum deflection across the length of Tile. All Tiles shall be bevelled edged. The Tile shall be polyester based, powder coated in White Colour. Tile shall be clipped into clip in profile of 0.5mm thick G.I. The clip in profile shall be supported from slab by means of rigid suspension of 4mm G.I. Rod, Hold on Clamp with Clip. Acoustic Felt: Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption

Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (a) 750 x 20 mm size

Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 complete

Providing 18mm thick plaster of parts (gypsum anhydrous) ceiling upto height of 5m above floor level over 1st class matti wood strips 25 x 6mm with 10mm gap in between & reinforced with rabbit wire mesh fixed to wooden frame.(b) Curved surfaces

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Melamine polishing on wood work (one or more coat) Glossy

Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.(b) Overall size 610mmx460mm (24"x18") bowl size 560mmx410mmx215mm (22"x16"x81/2") Glossy. 1.0mm thk,

Providing & fixing 20 mm caves barge broads 1st class matti wood

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Providing and Constructing Exposed decorative, cladding wall in laterite masonry, 150mm thk hard or equivalant (crushing strength not less than 140.00 Kg/ sq cm) on the existng, Concrete Block/laterite masonsry,plastered walls, in lime mortar 1:2 with red-oxide pigment to match the stone textures, as per the drawings, including proper bonding with the existing masonry, clamps, curing, scafolding in all floors with all leads and lifts etc. complete; and including painting with 2 coats of transparant coating of Durashield - WB or equivalent as per the direction of the Engineer -in-charge.

Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal hoints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar 80 mm thick in all colours except grey (M40 grade)

Providing and laying in design & pattern factory made chamfered edge S-Lock Pavers blocks of Basant/Equivalent make of size (97x175x80mm) shot blasted Variants M35 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. Colour Options: 80 mm thick with Grey,Red and Yellow

Providing and fixing solid cast iron railing as per the drawing including cutting, drilling, making curvature wherever required, using special die and fitting the same with necessary anchors, nuts and bolts complete or as directed by Engineer incharge. (for payment purpose only weight of the cast iron members shall be considered excluding fixing accessories such as nuts, bots, fastners etc.) Also including all tools, plants, labour and materials, leads, lifts etc complete as directed by Engineer-In-Charge

Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent

Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc (a) 15 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc (b) 20 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(a) 15 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(b) 20 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(c) 25 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(d) 32 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(e) 40 mm outer dia CPVC pipe

Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density): 40 mm nominal bore

Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density):50 mm nominal bore

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: Single socketed pipe 110 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etcvcomplete bend with door : 110 mm dia

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: 110 mm dia

Providing and fixing single Tee of rigid PVC(approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110 mm dia.

Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110 mm dia.

Providing and fixing R.P.V.C. vent cowl: 110 mm dia.

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110 mm dia.

Providing and fixing C. P. brass waste for washbasins and sink .40mm dia

Providing and fixing flush valve (nelson or Similar) fully chrominium plated with stop cock wall flange flush pipe or elbow and vaccu.m breaker coupling etc. complete : For Indian or european W.C.

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore

Providing and fixing ball valve (brass) of approved quality :20mm nominal bore

Providing and fixing ball valve (brass) of approved quality :25mm nominal bore

Providing and fixing ball valve (brass) of approved quality :32mm nominal bore

Providing and fixing ball valve (brass) of approved quality :40mm nominal bore

Providing and fixing non-return valve of approved quality :-25mm dia. Nominal bore

Providing and fixing non-return valve of approved quality :-32 mm nominal bore

Providing and fixing non-return valve of approved quality :-40 mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy sink mixer with U shape swinging casted spout Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock and stopper etc.to be paid separately)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and Laying roofing micro concrete tiles of Pioneer make or equivalent on Existing Steel Structure as per drawings as approved by the engineer, complete.

Providing and Laying roofing tile ridges on Existing Steel Structure as per drawings as approved by the engineer, complete.

Provided and fixing chromium plated brass or any other approved shade Ultra XL+ Tribolt CK deadbolt, pin technology with necessary screws etc. complete of Godrej or equivalent make for main door.All leads, lifts,labour, material, tools, plant, etc. complete.

Providing and fixing at Divyangjan Toilet Area 1) Grap Bar Leaft or Right 90Angle WAC-SAP-BAI090CS 2) Grap Bar Vertical swing WAC-SAP-BG0800CSLeaft or Right 90Angle WAC-SAP-BAI090CS 3) Grap Bar For support AHS-1501 4)Grap Bar 692 mm Long WAC-SAP-BR0600CS . complete as directed by Engineer-in-charge.

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications

Providing and laying Basant betons pebble beach grass pavers or equivalent make as per the drawings, layed on levelled surface and well compacted 50mm thick coarse sand filling the joints with coarse sand.Compacting, watering, levelling, etc, complete as directed by Engineer Incharge.

Skylight - Danpalon Or Equivalent Day light Panel System: Supply & fixing of 16mm thick 600 mm width MULTIWAL MULTICELL polycarbonate system consist of: The panels shall be uniform in color with an integral Microcell core. In a cross section, the core shall be constructed of tight cells with 6 walls. Panels will be supplied with Vertical Standing Seam at both sides of the panel Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability & shall be of same color as that of panel for aesthetic appeal. NOTE : Necessary Steel structure to be provided by the Steel fabricator. Skylights framework to be raised by 200 mm from Roof Pan level.

Providing and fixing Azulejos tiles of size 150 mm x 150 mm true to line and level in cement mortar 1:3 (1 cement : 3 fine sand) in dado as per approved design on the prepared surface including all necessary scaffoldings, pigments, vendoring surfaces smooth, clean and dry etc. complete and the total work should be treated for anti-fungus, moss, etc.

Carriage of debris from the site of work like excavated earth, rock boulders,vegetation etc, and disposing the same to a distance of 10.00Kms.including all lead and lifts etc. complete by means of tipper truck( contractor to indentify the site of disposal at his own cost and risk).

Providing and fixing of Heavy duty aluminium Window Casement openable type as per specification of Tostem India or equivalent make with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.

Providing and fixing of Heavy duty aluminium window Casement type single openable door type as per specification of Tostem India or equivalent make with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.

Providing and fixing of Heavy duty aluminium window Casement type Three track three sliding panel as per specification of Tostem brand India type as per specification of Tostem India or equivalent make with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.

Supplying and fixing of Hand Drier of EH24S-G,ULTRA THIN STAINLESS STEEL HAND DRYER (HEAVY DUTY)-GOLD of Euronics make or equivalent for ladies and Gents toilet complete. All leads, lifts,labour, material, tools, plant, etc. .

97 mm metal stud partition 2438 mm height) which includes one layer of tapered edges 12.5 mm thick Gypsum board (conforming to IS : 2095 – 1982) or equivalent, screw fixed with drywall screw of 25mm at 300 mm centres to either side of 70 mm studs (0.55 mm thick)

ELECTRICAL WORKS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group C -- with Cat A Modular Accessories

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. ( For light points to be used in non residential buildings) (a) Cat A

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. (a) Cat A

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A

Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required.

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required (a) Cat A

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed PVC conduit of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire (20mm Conduit)

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed PVC conduit of appropriate size as required. ( C ) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required. (j) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm casing )

Supply and erecting of 18 inch (450 mm sweep) exhaust fan with double ball bearings, 1400 rpm, heavy duty, complete with all accessories.(a) CAT A

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with modular TV socket including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. (a) CAT A

Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) RG - 6

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required.(a) Cat A

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector (modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. --- CAT B

Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.( a) 2 Pair

Supply, Erection, Testing & Commissioning of LED down light (recessed/ surface) of Round/ square shape integrated with 8 to 10 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.

Supply, Erection, Testing & Commissioning of LED down light (recessed/ surface) of Round/ square shape integrated with 16 to 20 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.

Supply, Erection, Testing & Commissioning of LED down light (recessed/ surface) of square shape integrated with 36 watts LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.

Supply, installation , testing and comissioining of updown lights of decorative fixture of 20- 25 watts including the light fixture - Make: Hawels, schreder, crompton or similar as directed by Engineer incharge complete as required.

Supply installation testing and comissioining of wall mounted split AC of 2 TR, 3 star, having inverter based compressor technology with power rating of 3 star, including required copper and drain pipping, communication cable, refrigerant gas, outdoor unit with stand, stabilizer and required accesories of make Daikin, Blue star or equivalent subjected to approval from engineer incharge

Supply of 28 W T5 single fluorescent luminaire with electronic ballst complete with all accessories including 28 W T5 fluorecent tube

Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories.( a) Cat A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (h) 16 way double door Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size. (5) 3 1/2 Core 95 sq.mm

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size. (6) 3 1/2 Core 120 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 3 1/2 x 95 Sq. mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (6) 3 1/2 x 120 Sq. mm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In soily strata

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) (a) 6 way with 100A MCCB as Incomer, double door, Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (d) TP, Cat A

Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (c) 50 to 100 A

Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department.

Dome Camera: Supply Installaton, testing and comissioning of 2 MP 3.6 mm Fixed Dome Network Camera with 1/1.8″ Progressive Scan CMOS, shutter speed of 1/3 s to 1/100,000 s, wide dynamic range, Video Resolution 2688 × 1520 for main stream and lower resoultions for sub stream, compatibel for live stream, metal casing protection with required acceories for power connection of HikVision or Dahua or equivalent make subjected to approval from engineer incharge. including camera plastic box and other accesories required complete

Bullet Camera: Supply Installaton, testing and comissioning of 2 MP 3.6 mm Fixed Bullet Network Camera with 1/1.2″ Progressive Scan CMOS, shutter speed of 1/3 s to 1/100,000 s, wide dynamic range, Video Resolution 3840 × 2160 for main stream and lower resoultions for sub stream, metal casing protection with required acceories for power connection of HikVision or Dahua or equivalent make subjected to approval from engineer incharge. including camera plastic box and other accesories required complete

Supply Installation Testing and comissioning of 32 channel 4 SATA NVR of Dahua or Hikvishion make, with 2 numbers of 6 TB Survaillance Hard Disk, 1 no of Rack 6 U, 4 nos of Rack 2 U and 24 inch monitor of LG make or equivalent inclusive of adapter, SMPS and all other accessories required for setting up of control setup for the CCTV system.

Supply Installation Testing and comissioning of 24 port POE Switch Make: Dlink or equivalent 24-port 10/100/1000 PoE, with all the accessories required.

Supply Installation Testing and comissioning of 16 port POE Switch Make: Dlink 16-port 10/100/1000 PoE, with all the accessories required.

Supply Installation Testing and comissioning of 8 port POE Switch Make: Dlink 8-port 10/100/1000 PoE, with all the accessories required.

Supplying, installation and testing of Cat 6 cable along the PVC pipe with saddles /supports

Supply, installation , testing and commissioning of Terminal Boxes size 4 x 4 inches with Terminals for cable connection. Box shall be of Hensel make or equivalent subjected to approval from engineer incharge.

Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.

Supply of cable route marker 20 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required. For HT cable.

Supplying, of HDPE pipes at store or site of work including loading & unloading stacking, transit insurance etc. Complete conforming to IS: 4984 - 1995 and made from PE 100 resin Class IV (16kg/cm2).(a) 63mm

Supplying, of HDPE pipes at store or site of work including loading & unloading stacking, transit insurance etc. Complete conforming to IS: 4984 - 1995 and made from PE 100 resin Class IV (16kg/cm2). (d) 110 mm

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer in-charge (a) 63 mm OD

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer in-charge (d) 110 mm OD

Supply of 62.5 KVA 3Phase Generator with Advanced Digital Controller (ADC2600) with amf logic panel, and 12V 6A battery Charger * Engine: Tata-Cummins 497 TC 74, TCIC *Alternator: Meccalte/CG. Canopy: having 3 door system only [1xAttachable & De attachable door( engine side) & 2xHinge type openable doors] with 3 YEARS COMPREHENSIVE WARRANTY AND HASSLE-FREE MAINTENANCE MAKE:- KOHLER/ STERLING/ CATAPILLAR

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 2.5 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 4 x 1.5/2.5 Sq. mm.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement (plumbing will be paid seperately). (b) In rocky strata

Supply & installtion of indor type wall mounted or floor mounted fabricated, painted, DG contorller controlled 100Ats Auto changeover make socomech with handel, with completed internal wiring,studs

Rohit Equipments

City Constructions