PROVN OF TRG SHED FOR 02 X SQUAD POST WITH STORE ROOM CUM TOILET NEAR BY BLDG NO. P-10 AT GRN BN UNDER GE (W) COLABA, MUMBAI

Amount

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth and getting out in any type of soil, complete all as specified and directed.

Excavating over areas, n.exc 1.50 m deep and getting out soft loose soil, complete all as specified and directed.

M&L Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil, complete all as specified and directed.

M&L for PCC type D-2, 1:4:8, 40 mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), complete all as specified and directed.

S & F of Rolled mild steel in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240, complete all as specified and directed.

S&F Rolled mild steel for joist, channel, angle or tee sections or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment FE-410 W Grd E-250, complete all as specified and directed.

M & L For 100mm thick PCC (1:2:4) type B-2, 40 mm graded crushed stone aggregate as in flooring, complete all as specified and directed.

M&L for Broken stone hardcore of gauge n.exe 63 mm diposited spread levelled in layers n.exc, 15 cm thick watered and rammed to a true surface, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and directed.

M&L for Diamond cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes, complete all as specified and directed.

All as per Item No. 15 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished even and smooth without using extra cemen, for external surfaces, complete all as specified and directed. Note: WPC shall be measured and paid for seperately under relevant item.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work in CM 1:4, finished surfaces even and fair without using extra cement for internal surfaces, complete all as specified and directed.

M&L for preparation of newly plastered brick/concrete applying two coats of oil bound distemper over a coat of alkali resistant priming paint, complete all as specified and directed.

M&L for Non skid ceramic digital coloured ceramic tiles 10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for Digital polished coloured ceramic tiles 600x300x9mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed. Note:- (Rate of Designer border in vertical surface shall be deemed to be included into quoted rate)

S&F Coloured anodized aluminium sections as per relevant IS for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame, complete all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Joint filling shall be completed using silicon gun. Make : As per Appendix 'C'.

Supply & fix sheet glass, ordinary quality, 5.50 mm thick and glazed with oil putty or fixed with rubber beading in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fix of Aluminium anodized deco grill Cat No DG-916, 7.50 mm thick, cut to required size/shape and fixed in position with aluminium beading, complete all as specified and directed by Engineer-in-Charge.

S&F in 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy and all other connected works, complete all as specified and directed.

S & F Curtain rod side designer aluminium anodized bracket of approved quality, complete all as specified and directed by Engr-In-Charge.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 50 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

S&F Factory made 35mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides laminated incl 5mm thick teakwood leaping alround, complete all as specified and directed.

S & F mild steel flat iron as in hold fast clamps articles conforming to FE 410 -O or FE 310-O, complete all as specified and directed.

S & F Aluminium anodised 150 mm tower bolt (ISI marked) of extruded section and fixed, complete all as specified and directed.

S & F Medium weight, mild steel butt hinge 100 mm (ISI marked), complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 140 mm fixed in floor, complete all as specified and directed.

S & F Aluminium handle (ISI marked) (alloy extended) fabrication type anodised (150 mm long), complete all as specified and directed.

150mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed, complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 as in hardstanding, plinth protection 75mm thick (using 40mm graded aggregate) including necessary expansion joints and filling joints with bitumen, complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) unreinforced, complete all as specified and directed.

Material and labour for crushed sand filling under precast interlocking paver blocks and all other similar works, complete all as specified and directed.

M&L Rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-40 Grade laid over sand cushning including compaction of paver blocks using surface vibrator, complete all as specified and directed. Note :- Sand cushioning shall be paid separately under relevant item.

M&L for taking down and refixing of interlocking tiles including prepration of sub base and also including 25mm thick (compacted) sand cushioning including watering and ramming and joints filled with sand, complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc primer, complete all as specified and directed.

S & L PVC Door frame of size 50mm X47mm made out of 5mm plain colour PVC Sheet reinforced with M.s Square tube supplying and fixing in opening as per specification and drg, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S & F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and directed.

S & F Vitreous china wash basin white flat back size 550X400 mm including bracket and cutting pinning in end of bracket and cutting pinning in end of bracket or erecting stand exclusive of fixing of supply & waste pipe, complete all as specified and directed.

S &F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms), complete all as specified and directed.

Vitreous china urinal partition white of size 310x700 mm, complete all as specified and directed.

S & F Toilet paper holder, vitreous China, box type, complete all as specified and directed.

S & F for tubular towel rail 20 mm dia including bracket aluminium anodised, complete all as specified and directed.

S & F in 15 mm bore fancy type health faucet with SS hose, complete all as specified and as directed by Engr-in-Charge.

S & F in CP soap dish, complete all as specified and as directed by Engr-in-Charge. Make:- Cera Cat Part No F 5002106 or of equivalent model in other makes as listed in Appendix 'C.

S&F in 15 mm bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts, complete all as specified and as directed by Engr-in-Charge.

S & F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (15mm die) fancy type, complete all as specified and as directed by Engr-in-Charge.

S & F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated (15mm dia), complete all as specified and as directed by Engr-in-Charge.

S & F PVC connections 15mm size with PTMT nuts of length 300mm, complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F PVC (SWR) 'P’ trap (110mm bore), complete all as specified and as directed.

S & F PVC (SWR) bends any radius (110mm bore), complete all as specified and as directed.

S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement (75mm dia), complete all as specified and as directed.

Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 500 litre capacity all as specified in SSR Part, complete all as specified and as directed.

S & F steel water tubing of size 20 mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall and ceiling with 150 mm gap between wall & pipe with clamp provided every 2 mtr or laid in floors with and making good disturbed surfaces to match the existing surfaces, complete all as specified and as directed by Engr-in-Charge.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L For RCC M-25 (Desing Mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, Conceled Wiring with accessories and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light fan point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately.

Description all as per Srl item No. 74 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No. 74 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No. 74 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point).

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps, complete all as specified and directed.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts, complete all as specified and directed.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts, complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc., complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified and directed.

S & F LED light fitting 1x9W/1x10W luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and Fix 20 watt LED, 6500 K, 4 feet long fixed including on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing, complete all as specified and directed. Wipro, Model No : Wipro Garnet 20W LED Emergency Batten or in equivalent model in Havells / Philips

S&F Exhaust fan 230 volts, 250mm,metal heavy dutywith wooden frame including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall, complete all as specified and directed.

Supply and fixing Ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC making all electric connection. huck and suitable size rod for hanging ceiling fan, complete all as specified and directed.

Supply and fixing LED security Building light LED 45 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.50 sqmm flexible copper conductor cable from ceiling rose to connector of light, complete all as specified and directed.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series, complete all as specified and directed.

Supply and fix in MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's, complete all as specified and directed.

Supply and fix MCCB DB TPN 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and directed. (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule. Note : Copper thimble shall be used for connection of cable.

Supply and fix MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts, complete all as specified and directed.

Material & Labour for Sub main wiring with two run of 6 sqmm stranded copper conductor PVC unseathed FRLSH wire along with 6 sqmm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB with all associated fixtures complete all as specified & as directed by Engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion, complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Sub main wiring with two run single core 1.50 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Casssing cappiing ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 1.50 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion, complete all as directed. Note:- (i) Two runs of 1.50 sqmm and one run of 1.50 sqmm cable and one run of PVC conduit shall be measured as one RM.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc, of size 35 Sqmm 3.50 core, confirming to IS specifications, complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab 30 cm x 30 cm x 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

RUPESH CONSTRUCTION CO (BID ID -3518852)

Shivam Enterprises (BID ID -3517849)

Bright Construction Co (BID ID -3512774)

I.J Enterprises (BID ID -3511399)

Unitech Enterprises (BID ID -3511302)

GANGAJAL (BID ID -3508191)

J M & Co (BID ID -3509166)