PROVN OF DI GI PIPELINE FROM PUMP HOUSE NO SEVEN TO PUMP HOUSE TEJAS AND INSTALLATION OF MOTORIZED VALVE FOR WATER TANK AT TEJAS ENCLAVE AT AFSSR PROVN OF UG TANK FOR DSC MD ACCN AT VSV AFSSR UNDER AGE BR AF GURGAON AND AGE EM AF GURGAON OF GE AF GU

Amount

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for laying of pipeline and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50mm and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Supply and laying Ductile Iron pipe line with spigot and socket ends including specials fittings, Class "K-9", in any length laid in trenches of size 100mm dia complete all as specified and directed.

Supply and laying GI pipe line with all fittings like socket of any type, elbow, bend, Tee, union, short piece, long screw, flange, cutting & welding as reqd site, medium grade laid in trenches of size 50mm dia complete all as specified and directed Note : All fixing materials are included in the unit rate.

Ditto all as per item 5 but 100 mm dia

Supply and fix cast iron flanged drilled heavy duty sluice valve of size 100 mm bore with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion, nuts and bolts with washers etc including taking down old unserviceable sluice valve of size 100 from existing position after removing out nuts/bolts etccomplete all as directed by Engr-in-Charge. Note.Nuts and bolts,gasket is included in the unit.

Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 50mm dia bore complete all as specified and directed by Engr-in-Charge after taking down old one. Note : All fixing materials like socket & threading is included in unit rate.

M&L for CI/DI fittings for flanged pipes upto 150 mm bore ,bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc complete all as specified and directed.

M&L for construction of Valve pit chamber 90 cm x 90cm (inner dimension) and 90 cm deep , from the top of MS cover with frame fixed on PCC Base , top cover shall be of 3 mm thick MS Sheet with locking arrangement of pad lock of 50mm size including brick work with sub class"B" bricks in CM 1:4 including 15 mm thick plaster in CM 1:4 (internally and externally) and necessray earth work in any type of soil including returning filling in and disposal of surplus oil to a distance n exc 50 mtrs and 150 mm thick PCC 1:4:8 , type D-2 , using 40mm graded stone aggregates as in floor complete all as specified and directed.

M&L for construction of Valve pit chamber 60 cm x 60cm (inner dimension) and 75 cm deep , from the top of MS cover with frame fixed on PCC Base , top cover shall be of 3 mm thick MS Sheet with locking arrangement of pad lock of 50mm size including brick work with sub class"B" bricks in CM 1:4 including 15 mm thick plaster in CM 1:4 (internally and externally) and necessray earth work in any type of soil including returning filling in and disposal of surplus oil to a distance n exc 50 mtrs and 150 mm thick PCC 1:4:8 , type D-2 , using 40mm graded stone aggregates as in floor complete all as specified and directed.

M&L for boring/auguring (upto 6mtr span) suitable hole and insertion of 50 to 100mm dia GI pipe not less than 600mm below existing PCC/Road/hard standing complete all as specified and as directed. Note: GI pipe will be paid in saperate item complete all as specified and directed.

M & L for Cutting existing CI of size upto 200mm dia or steel tubing of any size for alterations or additions and screwing all as specified and directed by Engg-in-charge

M & L for Modification of Existing control panel along with wiring material and laying 6 C x 1.5 sq mm XLPE insulated copper conductor GI armored cable etc complete all as specified and directed.

Supply ,installation, testing & Commissioning of high torque motorize valve with gears and adopters self Lubricating Type, Weather proof with protection against , over voltage Jamming of valve and over current protection with manual by-pass arrangement to open/Close the valve on power failure Valve Size:- 50 mm(2”), Designed line pressure 10 kg/sq cm, Operating angle; - 90 degree,Disc Material :- CI with nylon coating,Valve type :-Ball/Butterfly valve with geared motor on top,Operating Voltage :- 230 V AC etc complete all as specified and directed.. Make of Valve :Belimo/Audco/L&T Make : Belimo/SD TORK/ MARSH

Supply and installation of Actuator control panel for operation of 4 nos Actuator Open/ close operation by Local Switches along with wiring material etc complete all as specified and directed.

Supply and laying of XLPE insulated Copper conductor aluminium armored 7 C x 1.5 sq mm cable Make: Polycab/Havells/Finolex complete all as specified and directed.

Supply ,installation, testing & Commissioning of high torque motorize Butterfly valve of size 4" Line with gears and adopters self Lubricating Type, Weather proof with protection against , over voltage Jamming of valve and over current protection with manual by-pass arrangement to open/Close the valve Size:- 100 mm(4”), Designed line pressure 10 kg/sq cm, Operating angle,- 90 degree, Disc Material :- CI with nylon coating,Valve type :-Butterfly valve with geared motor on top,Operating Voltage :- 230 V AC To be installed at Tubewell distribution line etc complete all as specified and directed.. Make of Valve: Belimo/Audco/L&T/SD TORK/ MARSH

M&L for Taking out the unserviceable existing gate valve of 50mm dia including fittings from site and deposited to MES yard complete all as specified and directed.

Excavation over areas in soft/loose not exceeding 1.50m deep and getting out complete all as specified.

Ditto item No 20 above exceeding 1.50m deep but not exceeding 3.00m and getting out complete all as specified.

M/L 100mm thick Plain Cement concrete 1:2:4 type B-1 using 20mm graded stone agg as in foundation complete all as specified.

M&L reinforced cement concrete M-30 Design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L reinforced cement concrete M-30 Design mix as in Cylindrical wall complete all as specifed and directed.

M&L reinforced cement concrete M-30 Designe mix as in Slab complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to faces of Cylindrical walls,retaining walls, abutments,parapets and staircase ailings and similar work including attached pillasters, buttresses,etc.; vertical or to batter complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Formwork to square/reactangular sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed

M & L for rendering 12mm thick in first coat and 10mm thick in second coat in cement mortar 1:3 mix with suitable proportion of any intergral water proofing compound @ 2% by the weight of cement for internal sides of wall / flooring all as specified and directed. Note : WPC will be measured and paid seprately.

M & L for rendering 12mm thick in cement mortar 1:3 mix with suitable proportion of any intergral water proofing compound @ 2% by the weight of cement for External sides of wall including vertical edges of base slab and top of outside projection of base slab all as specified and directed. Note : WPC will be measured and paid seprately.

Supply only integral Water Proofing Compound

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto above but 5 to 10 mm dia in stirrups, spacers and binders etc completed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

M&L for mild steel work as band straps,supports,stey hold fast and wall ties and similar small articles conforming to IS-FE 290 Gde 165. Note : Embedded portion of hold fast/wall ties shall be treated with tar of coal tar black point complete all as specified and directed .

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/lose soil etc complete all as specified and directed by Engineer-In-Charge

Rolling and consolidating formation surface with 8 to 12 tonne power roller to required gradient and camber etc complete all as specified and as directed

M&L for hard core of gauge not exc 63 mm, deposited, spread, and levelled in layers not exc 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed by Engineer-In-Charge

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and directed by Engineer-In-Charge

M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Removing excavated soil to a distance exc 1.50 Km mtr but not exceeding 5.00 KM mtr and depositing where directed etc complete all as specified and as directed

amtoindia

PARKASH ENTERPRISES

P R Constructions

PAWAN KUMAR

MRITUNJYA ASSOCIATES