Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹86.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹89.2 L+₹1.9 L (2.22%)Rejected-Finance 12 BHARTI AARTIST COLONY VIKAS MARG NEW DELHI 110092 | EAST | DELHI | 110092 | L2 | Rejected-Finance Quoted High Rates | |
| 3 | L3₹89.6 L+₹2.4 L (2.70%)Rejected-Finance SHIV BARI ROAD NEAR KASUMAL HOTEL BIKANER 334003 RAJASTHAN | BIKANER | BIKANER | RAJASTHAN | 334003 | L3 | Rejected-Finance Quoted High Rates | |
| 4 | L4₹91.4 L+₹4.2 L (4.79%)Rejected-Finance | L4 | Rejected-Finance Quoted High Rates | |
| 5 | L5₹91.8 L+₹4.6 L (5.27%)Rejected-Finance PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L5 | Rejected-Finance Quoted High Rates |
| Sl No | Description | Qty | Unit | S.G.ENGINEERING COMPANY L7 | M/s Rohit Construction Co. L3 | RAJENDER ENTERPRISES L1 | Vijaypower Generators Limited L2 | SHREE GURU NANAK CONSTRUCTION COMPANY L8 | B5BUILDING SOLUTIONS L4 | M/s Kataria Construction Company L10 | M/S BUDHRAM BISHNOI L5 | Pioneer Enterprises L12 | SAGGI ELECTRIC COMPANY L6 | Rasvinderpalandco L9 | M/s Azure Infrastructure Construction Co. L11 | Jasraj & Company L13 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting all electric connections from existing DG set of capacity up to 200KVA and taking down the same & shifting to AGE E&M store yard (distance approx 5 KM) at suratgarh as directed by Engineer-in-charge.
Note : Cost of T&P required for disconnecting, taking down & tranportation shalll be included in item rate, nothing extra shall be paid on this account. | 4 | Each Job | 8,000 ₹32,000 | 5,000 ₹20,000 | 9,000 ₹36,000 | 4,500 ₹18,000 Lowest | 10,000 ₹40,000 | 25,000 ₹1,00,000 | 5,000 ₹20,000 | 11,529 ₹46,116 | 18,000 ₹72,000 | 18,480 ₹73,920 | 12,500 ₹50,000 | 20,500 ₹82,000 | 12,500 ₹50,000 |
| 2.00 | Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 125 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 125 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms.
(a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 125 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 12 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :-
(I) Fuel Filter
(ii) Governor (Electronic)
(iii) Complete battery set with lead & lugs as recommended by manufacturer.
(iv) Lubricant oil cooler
(v) Lubricant oil pump
(vi) Lubricant oil filter
(vii) Digital oil pressure gauge
(viii) Any other parts as prescribed by manufacturer for its good functional performance. | 1 | Each Set | 19,50,000 ₹19,50,000 | 18,00,000 ₹18,00,000 | 16,20,000 ₹16,20,000 Lowest | 16,59,000 ₹16,59,000 | 21,55,000 ₹21,55,000 | 17,25,000 ₹17,25,000 | 22,92,000 ₹22,92,000 | 16,37,629 ₹16,37,629 | 23,00,000 ₹23,00,000 | 19,17,300 ₹19,17,300 | 21,32,000 ₹21,32,000 | 22,10,000 ₹22,10,000 | 25,00,000 ₹25,00,000 |
| 2.01(ix) Battery charging alternator suitable for charging batteries. (x) Dry type air filter (xi) MS Channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard (xiii) Exhaust Pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer’s recommendation. (xiv)Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter (xvi) Self starter of suitable size (xvii) Turbo charger (xviii) Inline monoblock (xix) Fuel Pump (xx) Digital type coolant temperature gauge (xxi) Self starter with auto electric start accessories. (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxiii) Test Certificates. (b) Alternator : 125 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase, 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating conforming to IS-13364 (Part -2) complete with automatic voltage regulator output voltage regulated between +1% of set volts from no load to full load. | ||||||||||||||||
| 2.02(c) Manufacturer maintenance & operation manual of Gen set- 02 Set. (d) Supply install of acoustic enclosure suitable for 125 KVA as under (I) Fabricated out of CRCA sheet of minimum thickness 1.60mm. Polyester based powder coated internally and externally with lockable type door handle. All Nuts and handles shall be Zinc coated. (ii) The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality PU foam confirming to IS 7888 and complying to UL 94 norms of 50mm thickness and density at 28 Kg/M3 and perforated powder coated sheet specially designed attenuators(sound controller) at air entry and exit of the container noise level shall not exceed 75 DB at 1 meter distance as per CPCB/GoI Norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provision of a blower (v) Emergency stop push button outside container. (vi) Provn of light inside the canopy I.e LED light fitting 1x10 Watt with wiring and control switch. (e) MOUNTING ARRANGEMENT : Primer mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in CRCA sheet metal providing common bed for engine and alternator directly coupled together the base frame for tilting arrangement of DG ser as recommended by the manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set I.e along with the canopy, engine and alternator. (f) Cost of construction of PCC plinth of DG set as per manufacturer design and recommendation shall deemed to be included in the item. | ||||||||||||||||
| 2.03(g) AMF panel of size 1.5m x1.2m x 0.6m, made out of CRCA sheet 2.0mm thick indoor pedestal type supported on MS angle iron 40x5mm, totally enclosed with frint and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS:8623 copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415Volts 240Amp Capacity complete with powder coating, necessary internal electric connection as reuired and provision of the following : (I) MCCB 200A, 4P, 36kA, thermal and magnetic realease -02 Nos (ii) Power contactor, 200A, 4P-02 Nos (iii) MCB 32 Amp, DP,10 KA-01 Nos (iv) MCB 10-20 Amp, SP, 10KA-09 Nos (v) SMPS Battery Chrger 24V -01 Nos (vi) AMF Relay EC -2 Model – 01 No (vii) Auto manual slector switch -01 No (viii) PLA relays -04 Nos (ix) ON OFF push button (R+G) (1+1)- 03 Nos (x) ON OFF Lamp (R+G) (1+1)- 03 Nos (xi) Emergency Stop Push Button Red- 01 No (xii) Hooter-01 No (xiii) Digital AMp + Volt meter with inbuilt selector switch- 01 Set (xiv) MCB SP 6 Amps, 10 KA for protection -03 Nos (xv) LED Inticating lamp R.Y.B.- 03 Nos (xvi) C.T. Ratio 200/5VA - 03 Nos (xvii) Bypass arrangement with rotary bypass with AC 4 pole suitable Amp rating to isolate AMF panel for both side. Notes: (i) Initial filling of lubrication oil/coolant and fuel required for testing will be provided by the contractor without any cost. (ii) All arrangement for testing of DG set shall be made by the contractor with in iverall cost quoted. (iii) PRe-commissioning test shalll be carried out by rep of accepting officer. Test of DG set shall be carried out for 12 Hrs. | ||||||||||||||||
| 3.00 | Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 140 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 140 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms.
(a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 140 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 12 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :-
(I) Fuel Filter
(ii) Governor (Electronic)
(iii) Complete battery set with lead & lugs as recommended by manufacturer.
(iv) Lubricant oil cooler
(v) Lubricant oil pump
(vi) Lubricant oil filter
(vii) Digital oil pressure gauge
(viii) Any other parts as prescribed by manufacturer for its good functional performance. | 1 | Each Set | 23,10,000 ₹23,10,000 | 21,00,000 ₹21,00,000 | 21,60,000 ₹21,60,000 | 21,36,000 ₹21,36,000 | 22,95,000 ₹22,95,000 | 20,58,000 ₹20,58,000 | 24,50,000 ₹24,50,000 | 20,31,229 ₹20,31,229 Lowest | 25,00,000 ₹25,00,000 | 24,25,500 ₹24,25,500 | 23,25,000 ₹23,25,000 | 25,25,000 ₹25,25,000 | 26,50,000 ₹26,50,000 |
| 3.01(ix) Battery charging alternator suitable for charging batteries. (x) Dry type air filter (xi) MS Channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard (xiii) Exhaust Pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer’s recommendation. (xiv)Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter (xvi) Self starter of suitable size (xvii) Turbo charger (xviii) Inline monoblock (xix) Fuel Pump (xx) Digital type coolant temperature gauge (xxi) Self starter with auto electric start accessories. (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxiii) Test Certificates. (b) Alternator : 140 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase, 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating conforming to IS-13364 (Part -2) complete with automatic voltage regulator output voltage regulated between +1% of set volts from no load to full load. | ||||||||||||||||
| 3.02(c) Manufacturer maintenance & operation manual of Gen set- 02 Set. (d) Supply install of acoustic enclosure suitable for 140 KVA as under (I) Fabricated out of CRCA sheet of minimum thickness 1.60mm. Polyester based powder coated internally and externally with lockable type door handle. All Nuts and handles shall be Zinc coated. (ii) The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality PU foam confirming to IS 7888 and complying to UL 94 norms of 50mm thickness and density at 28 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specially designed attenuators(sound controller) at air entry and exit of the container noise level shall not exceed 75 DB at 1 meter distance as per CPCB/GoI Norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provision of a blower (v) Emergency stop push button outside container. (vi) Provn of light inside the canopy I.e LED light fitting 1x10 Watt with wiring and control switch. (e) MOUNTING ARRANGEMENT : Primer mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in CRCA sheet metal providing common bed for engine and alternator directly coupled together the base frame for tilting arrangement of DG ser as recommended by the manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set I.e along with the canopy, engine and alternator. (f) Cost of construction of PCC plinth of DG set as per manufacturer design and recommendation shall deemed to be included in the item. | ||||||||||||||||
| 3.03(g) AMF panel of size 1.5m x1.2m x 0.6m, made out of CRCA sheet 2.0mm thick indoor pedestal type supported on MS angle iron 40x5mm, totally enclosed with frint and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS:8623 copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415Volts 280Amp Capacity complete with powder coating, necessary internal electric connection as reuired and provision of the following : (I) MCCB 250A, 4P, 36kA, thermal and magnetic realease -02 Nos (ii) Power contactor, 250A, 4P-02 Nos (iii) MCB 32 Amp, DP,10 KA-01 Nos (iv) MCB 10-20 Amp, SP, 10KA-09 Nos (v) SMPS Battery Chrger 24V -01 Nos (vi) AMF Relay EC -2 Model – 01 No (vii) Auto manual slector switch -01 No (viii) PLA relays -04 Nos (ix) ON OFF push button (R+G) (1+1)- 03 Nos (x) ON OFF Lamp (R+G) (1+1)- 03 Nos (xi) Emergency Stop Push Button Red- 01 No (xii) Hooter-01 No (xiii) Digital AMp + Volt meter with inbuilt selector switch- 01 Set (xiv) MCB SP 6 Amps, 10 KA for protection -03 Nos (xv) LED Inticating lamp R.Y.B.- 03 Nos (xvi) C.T. Ratio 200/5VA - 03 Nos (xvii) Bypass arrangement with rotary bypass with AC 4 pole suitable Amp rating to isolate AMF panel for both side. Notes:(i) Initial filling of lubrication oil/coolant and fuel required for testing will be provided by the contractor without any cost. (ii) All arrangement for testing of DG set shall be made by the contractor with in iverall cost quoted. (iii) Pre-commissioning test shalll be carried out by rep of accepting officer. Test of DG set shall be carried out for 12 Hrs. | ||||||||||||||||
| 4.00 | Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 180 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 180 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms.
(a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 180 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 12 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :-
(I) Fuel Filter
(ii) Governor (Electronic)
(iii) Complete battery set with lead & lugs as recommended by manufacturer.
(iv) Lubricant oil cooler
(v) Lubricant oil pump
(vi) Lubricant oil filter
(vii) Digital oil pressure gauge
(viii) Any other parts as prescribed by manufacturer for its good functional performance. | 1 | Each Set | 23,45,000 ₹23,45,000 | 22,00,000 ₹22,00,000 | 20,70,000 ₹20,70,000 | 21,36,000 ₹21,36,000 | 23,89,000 ₹23,89,000 | 21,22,500 ₹21,22,500 | 25,20,000 ₹25,20,000 | 22,89,529 ₹22,89,529 | 26,50,000 ₹26,50,000 | 20,48,200 ₹20,48,200 Lowest | 24,00,000 ₹24,00,000 | 26,10,000 ₹26,10,000 | 27,90,000 ₹27,90,000 |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
23 Oct 2025, 6:00 pmClosed
Col Shery Goel
HQ CWE Bikaner Bikaner Military Station
SPECIAL REPAIR FOR REPLACEMENT OF DG SETS AT VARIOUS LOCATIONS AGAINST BER ITEMS UNDER GE(A) SURATGARH AT SURATGARH MIL STN
2025_MES_732663_1
CA No CWE BKN-Token No 59/2025-2026
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Suratgarh
Please refer tender documents
7 documents required · 7 mandatory
₹1,000
GE (A) Suratgarh
₹1.8 L
5 Dec 2025
25 Sept 2025
30 Oct 2025
25 Sept 2025
23 Oct 2025
16 Oct 2025
25 Sept 2025 - 2 Oct 2025
Amount
Disconnecting all electric connections from existing DG set of capacity up to 200KVA and taking down the same & shifting to AGE E&M store yard (distance approx 5 KM) at suratgarh as directed by Engineer-in-charge. Note : Cost of T&P required for disconnecting, taking down & tranportation shalll be included in item rate, nothing extra shall be paid on this account.
Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 125 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 125 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms. (a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 125 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 12 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :- (I) Fuel Filter (ii) Governor (Electronic) (iii) Complete battery set with lead & lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure gauge (viii) Any other parts as prescribed by manufacturer for its good functional performance.
(ix) Battery charging alternator suitable for charging batteries. (x) Dry type air filter (xi) MS Channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard (xiii) Exhaust Pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer’s recommendation. (xiv)Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter (xvi) Self starter of suitable size (xvii) Turbo charger (xviii) Inline monoblock (xix) Fuel Pump (xx) Digital type coolant temperature gauge (xxi) Self starter with auto electric start accessories. (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxiii) Test Certificates. (b) Alternator : 125 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase, 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating conforming to IS-13364 (Part -2) complete with automatic voltage regulator output voltage regulated between +1% of set volts from no load to full load.
(c) Manufacturer maintenance & operation manual of Gen set- 02 Set. (d) Supply install of acoustic enclosure suitable for 125 KVA as under (I) Fabricated out of CRCA sheet of minimum thickness 1.60mm. Polyester based powder coated internally and externally with lockable type door handle. All Nuts and handles shall be Zinc coated. (ii) The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality PU foam confirming to IS 7888 and complying to UL 94 norms of 50mm thickness and density at 28 Kg/M3 and perforated powder coated sheet specially designed attenuators(sound controller) at air entry and exit of the container noise level shall not exceed 75 DB at 1 meter distance as per CPCB/GoI Norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provision of a blower (v) Emergency stop push button outside container. (vi) Provn of light inside the canopy I.e LED light fitting 1x10 Watt with wiring and control switch. (e) MOUNTING ARRANGEMENT : Primer mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in CRCA sheet metal providing common bed for engine and alternator directly coupled together the base frame for tilting arrangement of DG ser as recommended by the manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set I.e along with the canopy, engine and alternator. (f) Cost of construction of PCC plinth of DG set as per manufacturer design and recommendation shall deemed to be included in the item.
Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 140 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 140 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms. (a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 140 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 12 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :- (I) Fuel Filter (ii) Governor (Electronic) (iii) Complete battery set with lead & lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure gauge (viii) Any other parts as prescribed by manufacturer for its good functional performance.
(ix) Battery charging alternator suitable for charging batteries. (x) Dry type air filter (xi) MS Channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard (xiii) Exhaust Pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer’s recommendation. (xiv)Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter (xvi) Self starter of suitable size (xvii) Turbo charger (xviii) Inline monoblock (xix) Fuel Pump (xx) Digital type coolant temperature gauge (xxi) Self starter with auto electric start accessories. (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxiii) Test Certificates. (b) Alternator : 140 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase, 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating conforming to IS-13364 (Part -2) complete with automatic voltage regulator output voltage regulated between +1% of set volts from no load to full load.
(c) Manufacturer maintenance & operation manual of Gen set- 02 Set. (d) Supply install of acoustic enclosure suitable for 140 KVA as under (I) Fabricated out of CRCA sheet of minimum thickness 1.60mm. Polyester based powder coated internally and externally with lockable type door handle. All Nuts and handles shall be Zinc coated. (ii) The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality PU foam confirming to IS 7888 and complying to UL 94 norms of 50mm thickness and density at 28 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specially designed attenuators(sound controller) at air entry and exit of the container noise level shall not exceed 75 DB at 1 meter distance as per CPCB/GoI Norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provision of a blower (v) Emergency stop push button outside container. (vi) Provn of light inside the canopy I.e LED light fitting 1x10 Watt with wiring and control switch. (e) MOUNTING ARRANGEMENT : Primer mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in CRCA sheet metal providing common bed for engine and alternator directly coupled together the base frame for tilting arrangement of DG ser as recommended by the manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set I.e along with the canopy, engine and alternator. (f) Cost of construction of PCC plinth of DG set as per manufacturer design and recommendation shall deemed to be included in the item.
Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 180 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 180 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms. (a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 180 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 12 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :- (I) Fuel Filter (ii) Governor (Electronic) (iii) Complete battery set with lead & lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure gauge (viii) Any other parts as prescribed by manufacturer for its good functional performance.
(ix) Battery charging alternator suitable for charging batteries. (x) Dry type air filter (xi) MS Channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard (xiii) Exhaust Pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer’s recommendation. (xiv)Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter (xvi) Self starter of suitable size (xvii) Turbo charger (xviii) Inline monoblock (xix) Fuel Pump (xx) Digital type coolant temperature gauge (xxi) Self starter with auto electric start accessories. (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxiii) Test Certificates. (b) Alternator : 180 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase, 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating conforming to IS-13364 (Part -2) complete with automatic voltage regulator output voltage regulated between +1% of set volts from no load to full load.
(c) Manufacturer maintenance & operation manual of Gen set- 02 Set. (d) Supply install of acoustic enclosure suitable for 180 KVA as under (I) Fabricated out of CRCA sheet of minimum thickness 1.60mm. Polyester based powder coated internally and externally with lockable type door handle. All Nuts and handles shall be Zinc coated. (ii) The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality rock wool/ mineral wool conforming to IS 8183 of 50mm thickness and density at 96 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specially designed attenuators(sound controller) at air entry and exit of the container noise level shall not exceed 75 DB at 1 meter distance as per CPCB/GoI Norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provision of a blower (v) Emergency stop push button outside container. (vi) Provn of light inside the canopy I.e LED light fitting 1x10 Watt with wiring and control switch. (e) MOUNTING ARRANGEMENT : Primer mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in sheet metal providing common bed for engine and alternator directly coupled together the base frame for tilting arrangement of DG ser as recommended by the manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set I.e along with the canopy, engine and alternator. (f) Cost of construction of PCC plinth of DG set as per manufacturer design and recommendation shall deemed to be included in the item. Notes: (i) Initial filling of lubrication oil/coolant and fuel required for testing will be provided by the contractor without any cost. (ii) All arrangement for testing of DG set shall be made by the contractor with in iverall cost quoted. (iii) Pre-commissioning test shalll be carried out by rep of accepting officer. Test of DG set shall be carried out for 12 Hrs.
Supply installation, testing and commissioning of containerizsed silent diesel engine driven generator set complete to give an output of 200 KVA AC 415 volts, 50 cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM pads”B” series) complete in all respect with and including accessories and components as specified below including sound proof integral acoustic enclosure for 200 KVA Gen sets eco friendly and as per Ministry of Environment & Forest notification dated 17 May 2002 complete including emergency stop button, illumination inside canopy, temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722 and conforming to latest CPCB IV Norms. (a) Diesel engine Driven Engine (Prime Mover) : Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 200 KVA alternator, water cooled conforming to BSS-649 rated for continuous running diesel engine suitable for FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for anyone hour in any 06 hour running, complete with and canopy thickness minimum 1.60 mm including following accessories :- (I) Fuel Filter (ii) Governor (Electronic) (iii) Complete battery set with lead & lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure gauge (viii) Any other parts as prescribed by manufacturer for its good functional performance.
(ix) Battery charging alternator suitable for charging batteries. (x) Dry type air filter (xi) MS Channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard (xiii) Exhaust Pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer’s recommendation. (xiv)Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter (xvi) Self starter of suitable size (xvii) Turbo charger (xviii) Inline monoblock (xix) Fuel Pump (xx) Digital type coolant temperature gauge (xxi) Self starter with auto electric start accessories. (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxiii) Test Certificates. (b) Alternator : 200 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase, 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating conforming to IS-13364 (Part -2) complete with automatic voltage regulator output voltage regulated between +1% of set volts from no load to full load.
(c) Manufacturer maintenance & operation manual of Gen set- 02 Set. (d) Supply install of acoustic enclosure suitable for 200 KVA as under (I) Fabricated out of CRCA sheet of minimum thickness 1.60mm. Polyester based powder coated internally and externally with lockable type door handle. All Nuts and handles shall be Zinc coated. (ii) The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality PU foam confirming to IS 7888 and complying to UL 94 norms of 50mm thickness and density at 28 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specially designed attenuators(sound controller) at air entry and exit of the container noise level shall not exceed 75 DB at 1 meter distance as per CPCB/GoI Norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provision of a blower (v) Emergency stop push button outside container. (vi) Provn of light inside the canopy I.e LED light fitting 1x10 Watt with wiring and control switch. (e) MOUNTING ARRANGEMENT : Primer mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in CRCA sheet metal providing common bed for engine and alternator directly coupled together the base frame for tilting arrangement of DG ser as recommended by the manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set I.e along with the canopy, engine and alternator. (f) Cost of construction of PCC plinth of DG set as per manufacturer design and recommendation shall deemed to be included in the item. Notes: (i) Initial filling of lubrication oil/coolant and fuel required for testing will be provided by the contractor without any cost. (ii) All arrangement for testing of DG set shall be made by the contractor with in iverall cost quoted. (iii) Pre-commissioning test shalll be carried out by rep of accepting officer. Test of DG set shall be carried out for 12 Hrs.
M&L for Earthing complete with galvanized steel perforated pipe electrode 40mm bore, medium grade, 2.5 meters length, buried directly in ground preferably verticle with top edge of the plate not less than 1.25 meter below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washer of galvanized iron or steel other end connected to earthing test/equipment and protected by 40mm dia GI light grade protection pipe from test point to earthing test point/equipment fixed and perforated water pipe of 20mm bore GI medium grade of length 2.25 meter and top with socket & pluga nd bottom connected to earth plate by slit and two bolts/nuts/washer. PCC Chamber in cement concrete (1:2:4) type b-1 and 40 mm thick precast RCC (1:2:4) type B0 cover with 40mm x40mm x3mmm MS nagle iron frame, excvation & earthwork complete all as shown in electrical plate No 3 of SSR Part-I complete all as specified and as directed. Notes: (i) GI strip upto earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber (iii) Minimum wieght of reinforcement shall be 1kg for each earth pit cover.
Supply, laying, jointing, commissioning and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, armoured, heavy duty underground electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade having cross sectional area 240 Sqmm 3.5 core conforming to IS-7098 (Part-I-1998) laid in trenches, along poles through pipes etc complete all as specified and as directed by Engineer-in-charge.
Supply, laying, jointing, commissioning and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, armoured, heavy duty underground electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade having cross sectional area 185 Sqmm 3.5 core conforming to IS-7098 (Part-I-1998) laid in trenches, along poles through pipes etc complete all as specified and as directed by Engineer-in-charge.
Supply, laying, jointing, commissioning and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, armoured, heavy duty underground electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade having cross sectional area 150 Sqmm 3.5 core conforming to IS-7098 (Part-I-1998) laid in trenches, along poles through pipes etc complete all as specified and as directed by Engineer-in-charge.
Supply, jointing and testing in replacement of heat shrinkable type outdoor termination jointing kit, suitable for cable size up to 150 Sqmm to 185 Sqmm 3.5 core , 1100 Volts aluminium conductor including making connections complete all as specified and as directed by Engineer-in-charge.
Supply, jointing and testing in replacement of heat shrinkable type outdoor termination jointing kit, suitable for cable size up to 240 Sqmm to 300 Sqmm 3.5 core , 1100 Volts aluminium conductor including making connections complete all as specified and as directed by Engineer-in-charge.
Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth,not exc 10 Sqm on plan & not exc 1.5m in depth for foundation of poles, strut, stays, joints or laying underground cables etc and getting out in soft/loose soil including taking out old brick or precast cable cover complete complete all as specified and as directed.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.
Supply & fixing HDPE DWC pipe of outer dia 110mm and inner dia 95 mm for laying of cable laid in trenches complete all as specified and as directed. Note : Necessary earthwork shall be measured and paid seperately under respective item.
Supply and laying for GI pipe light grade 100mm bore (ISI Marked) laid in trenches/ road crossing/ fixed to poles/walls/path / drains /floors with all fittings such as clamps, nut bolts and washers etc as required complete all as specified and as directed.
Supply and laying for GI pipe light grade 80mm bore (ISI Marked) laid in trenches/ road crossing/ fixed to poles/walls/path / drains /floors with all fittings such as clamps, nut bolts and washers etc as required complete all as specified and as directed.
Vijaypower Generators Limited (BID ID -3457887)
M/s Rohit Construction Co. (BID ID -3457540)
B5BUILDING SOLUTIONS (BID ID -3462417)
M/S BUDHRAM BISHNOI (BID ID -3463425)
SAGGI ELECTRIC COMPANY (BID ID -3457569)
S.G.ENGINEERING COMPANY (BID ID -3457494)
SHREE GURU NANAK CONSTRUCTION COMPANY (BID ID -3462133)
Rasvinderpalandco (BID ID -3463488)
M/s Kataria Construction Company (BID ID -3462733)
M/s Azure Infrastructure Construction Co. (BID ID -3463349)
Pioneer Enterprises (BID ID -3463606)
Jasraj & Company (BID ID -3462628)
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Tender59.pdf
Tender Documents • 0.82 MB
BOQ_820330.xls
BOQ • 0.32 MB
BOQCorrigendum_T59.pdf
PDF • 0.20 MB
BOQCorrigendum_T59.pdf
PDF • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .