STP PATTI

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Tender No: DSWC/ASR/2025-26/08

Name of the Firm/Bidder

Address of Firm/Bidder

Mobile No of Firm/Bidder Email ID of Firm

Name of work: PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 400,315,200 MM & 160 MM PE-80,A7 4 Kg/cm2 WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT, PATTI, DISTRICT: TARN TARAN FOR SUPPLY OF TREATED WATER FOR IRRIGATION.

Total Estimated Amount of Works Rs. Two Crore Thirty Three Lakh Fifty One Thousand Two Hundred Sixty Eight Rupees only

Quoted by Contractor {- or + to estimated amount, in figure upto 2 dcimal point only} Quote (-/+)

Note: Please quote only figure (upto 2 decimal points) in above blue colour box in minus or plus. Do not put %age sign after this figure. Please check Quoted Rate in Next cell.

Note: Please refer to DNIT for item wise rate and details.

PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 200 MM & 180 MM PE-80, 4 Kg/cm2WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT, AJNALA, DISTRICT: AMRITSAR FOR SUPPLY OF TREATED WATER FOR IRRIGATION.

Item of Work Quantity Unit Rate in (Rupees) Total in Rupees

Excavation of Trenches (with backfilling) and providing ,laying& jointing of HDPE pipeline system complete in all respects 15679156.27

Civil works for pump room 727115.39

Civil works for Sump well 2128416.37

Complete pumping system 4034997.99

Electric Fittings for pump house and pumps 559644.77

Flow Meter 216937

Only one of the options is to be filled. More than one option shall be rejected.

Rate filled in any form shall be considered only in %age

Rate shall be filled both in figures and in words, otherwise tender shall be rejected

Rate filled at any other place in the document shall not be considered.

No condition shall be accepted.

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 25 MLD, S.T.P. BASTI PEER DAAD , JALANDHAR

PIPELINE SYSTEM

S.No. Description of items Unit Qty Rate (INR) Add GST on work cont. as per A&C Slip 5 Total Rate Amount (INR)

1 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work upto 1.5 m. Depth for All classes of soil except rocky Cum 93.78

2 Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Including riser pipe)

H.D.P.E 315 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 1851 2841.9 5260356.9

H.D.P.E 200 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 2955 1137.73

H.D.P.E 160 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 5756 744.1

H.D.P.E 400 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 150 4464.5

3 Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F)(a) Mtr 1851 56.84

For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F)(b) Mtr 2955 22.76

For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F)(c) Mtr 5756 14.89

For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F)(d) Mtr 150 89.29

4 Supply & Installation of Alfa-Alfa valve (C.I)

For 200 mm. Dia. (Rate approved by DSWC) Each 4 1034

installation and fitting 200 mm Each 4 52

cement concrete 1:2:4 200 mm Cum 4558 1357

For 160 mm. Dia. (Rate approved by DSWC) Each 37 785

installation and fitting 160 mm Each 37 42

cement concrete 1:2:4 160 mm Cum 2.61 12552.28

4a Supply of Alfa -Alfa Valve Anti theft Mechanism Alfa -2 Valve

For 200 mm. Dia. (Rate approved by DSWC) Each 4 638

For 160 mm. Dia. (Rate approved by DSWC) Each 37 621

5 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

C.I Single air valve (Size 80mm) Each 43 4507.12

6 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Supply & Jointing of 80 mm. Dia. G.I. Pipe(3mts for each ARV ) Mtr

7 providing lowering precast concrete np2 plain end pipes and collar with reinforced cement in trenches to correct gradient and cutting of reinforcement etc

RCC NP2 PIPE 150 MM I/D PIPE Mtr 86

cc 1:2:4 with stone ballast Cum 1.09 4558 4801.85 5234.02

8 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI

200mm i/d Sluice Valves flanged Each 2 15241.75

operation of sluice valve Mtr 4

150mm i/d Sluice Valves flanged Each 3 8914.18

operation of sluice valve Mtr 6 3596.64

9 providing shinging out cutting jointing and testing of isi marked di double flanged pipe with screwed flanges as per is 3829-2000 class k 9 andlaying in trenches

200mm i/d pipe lines laid complete Mtr 30 3774.64

150mm i/d pipe lines laid complete Mtr

10 constructing brick masonary rcc top slab 20 cm thick foundation concrete 1:4:8

inside size 150x180 cm and 120cm deep Each 6

extra 6 times of 0.30 m 3400x6=20400 Each 3 21491.4

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. PATTI, 8MLD

Construction of Pump House (6m×4m)

S.No. Description of items Unit Qty Rate (INR) Add GST 5.35% on work cont. as per A&C Slip 5 Total Rate (INR) Amount (INR)

1 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Cum 31.53

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 5.58

3 Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m Cum 327

4 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. Cum

5 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. Cum

0.9 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Sqm 331

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete Qtl 7920.15

7 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Sqm 210

8 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) Sqm 477

9 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. Sqm 380

10 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Sqm 532

11 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Cum

12 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Sqm

13 12.5 mm thick cement plaster 1:5 Sqm

14 12.5 mm thick cement plaster 1:4 Sqm

15 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish Sqm 80

16 Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface Sqm 21

17 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Sqm 120

18 Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material Sqm 749

19 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material Sqm 403

20 Floating coat of 1:5mm thick neat cement laid in one operation to the topping Sqm 29

21 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item) Mtr 232

22 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge

UPVC 110 mm bend Nos 135

23 Top Khurra 0.6m×0.6m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 Each 95

24 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. Each 127

25 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths). Sqm 645

26 Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. Kg 89

27 Providing and fixing 14 gauge MS sheet garagedoors with 40mmx40mmx6mm angle iron framewith diag Sqm 3900

28 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) Kg 128

29 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area Sqm 598

30 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. Sqm 906

31 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 24

32 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade Sqm 66

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. Patti 8MLD

Construction of Sump Well (5 lakh litre)

S.No. Description of items Unit Qty Rate (INR) Add GST @ 5.35% (A & C Slip No. 5) Amount (INR)

1 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. Cum 968.45

0.0 Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Cum 273.08

0.9 Extra for filling earth in 15 cm layers and compaction Cum 273.08

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 18.11

3 Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. Cum 45.97

4 Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. Cum 86.83

5 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete Qtl 52.32

6 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Sqm 15.2

7 Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when Sqm 496.2

8 Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects. Sqm 324.93

9 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded Qtl 21

10 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 103.03

11 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to givean even shade Sqm 103.03

TOTAL 2128416.37

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 8 MLD, S.T.P. PATTI

ESTIMATE FOR COST OF PUMPING SYSTEM INSTALLATION

S.No. Description of items Unit Qty Rate (INR) Add GST on work cont. as per A&C Slip 5 Total Rate Amount (INR)

1 Providing, fitting & commisioning of ISI Mark Submesrible pumpset 4.83 MLD discharge and 26m head along with 10 meter cable (Non- Schduled Item, cost considered as per market rate) (excluding the cost of Panel Board, Fuse Box, Cable) Set 3

2 Variable Frequency Drive with MS steel sheet fabricated, dust & vermin proof wall mounted, rubber cord lining to prevent dust & moisture, dully painted with required holes for cables in coming and out going of suitable capacity with starter, Amp. meter, volt. meter for running of Motor pumpset Set 3

3 supplying lowering of m/s pipe as per is 4270-2001 including ms socket dim as per is code duly welded with ms electrode to have extra strength to lower the pipe into tubewell bore 150 mm normal dia wt 21.6 kg/metre ) 5.4 mm thickness class c heavy duty incl. special etc. mtr 10

4 Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. 100mm nominal diameter (weight 14.5 kg per metre) 5.4 mm thickness mtr 15

5 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. (B) Class PN-1.6 as per ISI with gun metal flap (b) 100mm i/d Non-return valve

Total for 3 pumpsets Each 3

6 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (B) Class PN-1.6 as per ISI (b) 100mm i/d Sluice Valves flanged

Total for 3 pumpsets Each 3

7 Supply and Installation of duck foot bend in tank, including grouting of anchor bolts, pump fixing, steel cable, steel chain, welding flanges, delivery line, 200mm main pipe, and all accessories for a complete job. Job 3

8 Providing and fixing 100mm P/E M.S. Bend (heavy) for a complete installation Each 3

9 Fixing of float switch Each 3

10 Providing and fixing of 150mm heavy flange with nut bolt jain for making connection between 200mm MS pipe and 200mm (o/d) HDPE pipe. Each 1

11 Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0sq.mm (56/0.3mm), 3 Core (For Extension of Pump Wire; in Case) Mtr 60

12 Providing and fixing of 150mm MS bends Each 3

13 Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size 80 mm complete in all respect. (a) C.I Fire Hydrants IS-908 Each 2

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 8 MLD, S.T.P. PATTI

Electrical Estimate for Pump room

S. No. Description of Item Unit QTY. RATE (INR) Add Premium as per A&C Slip 3, 4 & 10 Rate after premium Add GST on work cont. as per A&C Slip 5 Total Rate (INR) Amount (INR)

1 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (With fan box) Each 2

Wiring light point Each 6

Wiring 6Amp. wall socket point Each 2

Wiring 16/20Amp. power plug control poin Each 1

2 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (Un-sheathed) Meter 100

Overall size 4sq.mm (Un-sheathed) Meter 100

3 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed) Meter 50

4 G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Each 5

5 XLPE INSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Meter

Overall size 95sq.mm (3.5Core) Armoured (Loose) Meter 150

6 Supply & laying of circular Aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated screened with extruded semiconducting in combination with copper tape (0.3KA for 1sec) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS: 7098 (Part 2), 2011 working voltage 11KV (E) grade to be laid loose in the exiting trench or pipe :-

HT Cable Overall size 35sq.mm (3Core) Meter 150

7 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C) Each 6

MCB Single Pole 40amp. (10kA, Curve-C) Each 1

8 RCCB's: Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

RCCB Double Pole 16/25amp., Sensitivity 30mA Each 1

9 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439- 1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 8 way each Each 1

10 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

Cable Tray Size 150mm x 50mm x 50mm (2mm thick) Meter 50

11 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) Meter 150 276 290.76

11 LT PANELS: Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 4Nos. outgoing MCCB's 100amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1100 x 400mm) Each 1

12 MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting Each 4

13 MCCB Four Pole 400amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting Each 1

14 Supply and installation of Hevay Duty Exhaust fan 450 mm with 1400 rpm. Approved MakeCrompton, Havells, Bajaj or equivalent. Each 2

15 Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge. Each 4

16 Supply and installation of ceiling fan 1200 mm with Double ball bearing. Approved Make Crompton, Havells, Bajaj or equivalent. Each 2