REPAIRS AND PAINTING TO STEEL FURNITURE UNDER GE (CENTRAL) KIRKEE.

Amount

REPAIRS TO CHAIR CB STEEL WITH ARMS AND WITHOUT ARMS (FD-75(M)):- (a) Removing of old unserviceable back frame of chair CB steel with arms, supply and fix new back frame made out of seasoned teakwood duly canned as per trade pattern, the chair shall be fixed with flat iron of 3mm thick 40 x 25mm size with clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support all as specified and directed.

(b) Removing of old unserviceable seat frame of chair CB steel with arms, supply and fix new back frame made out of seasoned teakwood duly canned as per trade pattern, the chair shall be fixed with flat iron of 3mm thick 40 x 25mm size with clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support all as specified and directed.

(c) Removing of old unserviceable hand rest, supply and fix new hand rest made out of well seasoned teakwood with required size screws, the hand rest shall be french polished with black colour all as specified and as directed and as shown on drawing.

(d) Removing of old unserviceable back frame of chair CB steel with out arms, supply and fix new back frame made out of seasoned teakwood duly canned as per trade pattern, the chair shall be fixed with flat iron of 3mm thick 140 x 25mm size with clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support all as specified and directed.

(e) Removing of old unserviceable seat frame of chair CB steel with out arms, supply and fix new seat frame made out of seasoned teakwood duly canned as per trade pattern, the chair shall be fixed with flat iron of 3mm thick 140 x 25mm size, clips 02 Nos each on either side of seat duly welded and also making holes to seat frame centre to centre by drilling machine for fixing seat frame with required size screws for extra support all as specified and directed.

(f) Removing of old unserviceable PVC caps of top frame of chairs CB steel with and without arms, supply and fix new PVC caps (as approved) all as specified and as directed.

(g) Material and labour for preparation of surfaces, painting of chair CB steel with arms with two coats of synthetic enamel paint olive green complete all as specified and as directed.

(h) Material and labour for preparation of surfaces and painting of chair CB steel with out arms with two coat of synthetic enamel paint olive green all as specified and as directed.

REPAIRS TO TABLE OFFICE CLERK STEEL(FD-84(M) / 1004) :- (a) Removing unserviceable top of table, supply and fix new top to table office clerk steel made out of 18mm thick preleminated particle board exterior grade. Make-Greenply / NOVAPAN/action tesa with 6mm thick teak wood beading alround the top all as specified and as directed.

(b) Removing of old unserviceable drawers from table office clerk steel, supply and fix of new drawers made of 1.00mm thick sheet of same shape and size as existing all as specified and directed.

(c) Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required all as specified and directed.

(d) Removing of unserviceable locks from table office clerk steel and supply & fix of new brass locks of 6 lever with duplicate key of approved quality all as specified and directed.

(e) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel panit olive green colour all as specified and as directed.

TABLE DINING ORs ALUMINIUM TOP( FD-165):- (a) Removing of old unserviceable top of table dining ORs, supply and fix new top made out of 18mm thick commercial plywood BWR grade covered with 22 guage aluminium sheet on top side by nailing appropriate size nails to plywood as per drawing, all as specified and as directed.

(b) Removing of unserviceable legs, supply and fix new legs made out of 25mm square MS tube of 1.6mm thick by arc welding to the frame all as specified and directed.

(c) Fixing of hard rubber shoes of approved quality to legs of table dining all as specified and directed.

(d) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint black colour all as specified and as directed.

TABLE 3' X 2' WITH DRAWER STEEL (FD-1008):- (a) Removing unserviceable top of table, supply and fix new top to table made out of 18mm thick preleminated particle board exterior grade. Make-Greenply / NOVAPAN/ Action Tesa with 6mm thick teak wood beading alround the top, complete all as specified and as directed.

(b) Removing of old unserviceable drawers from table 3' x 2' steel, supply and fix new drawers made of 1.00mm thick MS sheet of same shape and size as existing all as specified and directed.

(c) Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required all as specified and directed.

(d) Material and labour for painting to the frame of table with one coat of synthetic enamel paint olive green of Make- Asian/Shalimar all as specified and as directed.

TABLE 3' X 2' WITH OUT DRAWER STEEL ( FD-1007) :- (a) Removing unserviceable top of table, supply and fix new top to table made out of 18mm thick preleminated particle board exterior grade. Make-Greenply / NOVAPAN/ Action Tesa with 6mm thick teak wood beading alround the top all as specified and directed.

(b) Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required all as specified and directed.

(c) Material and labour for painting to the frame of table with one coat of synthetic enamel paint olive Green of Make- Asian/Shalimar all as specified and directed.

TABLE 3' X 3' STEEL (FD-1009):- (a) Removing unserviceable top of table, supply and fix new top to table made out of 18mm thick preleminated particle board exterior grade. Make-Greenply / NOVAPAN/ Action Tesa with 6mm thick teak wood beading alround the top all as specified and directed.

(b) Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required all as specified and directed.

(c) Material and labour for painting to the frame of table with one coat of synthetic enamel paint olive Green of Make- Asian/Shalimar all as specified and directed.

TABLE BED SIDE MAP FD/E6/MAP/15 (R ):- (a) Removing of old unserviceable top from table bed side MAP, supply and fix new top of existing shape and size consisting of 18mm thick MDF board, exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed, provided with edging all round the top with 4mm thick teak wood, all exposed faces of timber shall be treated with french polish as shade shal be bavarian beech complete all as specified and directed.

(b) Removing of old unserviceable small drawer with knobs and providing of new small drawers of MDF board 18/19 mm thick board, BWR exterior grade as approved by GE conforming to IS -12823, Grade-I, type-II duly screwed for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg of existing shape and size complete all as specified and as directed.

(c) Removing of old unserviceable large drawer with knobs and providing of new large drawers of MDF board 18/19mm thick board exterior grade for sides as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed and 6mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.,of existing shape and size complete all as specified and directed.

(d) Removing of old unserviceable back of table bed side MAP, supply and fix 18mm thick MDF board BWR, exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed of existing shape and size complete all as specified and directed.

(e) Removing of old unserviceable sides of table bed side MAP and supply & fix 18mm thick MDF board BWR, exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed of existing shape and size complete all as specified and directed

(f) French polishing with high class finish on wooden surface and synthetic enamel paint of black colour on steel frame including preparation by proper sand papering. all as specified and directed and all as per drawing.

Gas Welding point(FD-243, FD-1032, FD-1046, FD-1004, FD-1008, FD-1007, FD-562, FD-1014, FD-362, FD-1003, FD-75, FD-165(M), FD-75(M), FD-256 (Steel items of various drgs) Gas Welding point (01 inch) on broken part of steel furniture shall be carried out such as Almirah large steel with shelf/Wo shelf and Half hanging, Almirah med steel/small with shelf, Locker bed side steel, Table office clk steel, table 3x2 steel w/d, Locker SKD 562 of chair CB steel with arms/ without Arms, chair verandah, table dining, table office, officer/clerk steel, chair easy steel, teapoy verandah & Steel items of various drgs etc. welding shall be done continuous type, including rubbing and finishing to smooth surface all as specified and directed.

BED HARD (MAP) (FD/E6/MAP/08 (R )) (a) Removing the unserviceable plywood 12 mm, supply and fix new plywood 12 mm thick with approved quality and pattern all as specified and as directed.

(b) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint black colour all as specified and as directed.

FORM WITHOUT BACK ( FD-1027, FD-77 (M) (a) Removing unserviceable planks from form without back, supply and fix with appropriate size nut & bolts by new planks of size 1530 X 255 X 25mm made out of 1st class teak wood as existing and all as per specification given in drawings all as specified and directed.

(b) Repair / Replace frame of form without back with 25mm square MS tube of 1.6 mm thick not less than 300mm long by arc welding where ever required all as specified and directed.

(c) Material and labour for painting to the frame of form without back with one coat of synthetic enamel paint black of Make- Asian/Shalimar all as specified and directed.

FORM WITH BACK ( FD-78 (M) ) :- (a) Removing unserviceable seat planks from form with back, supply and fix with appropriate size nut & bolts by new planks of size 1800 X 255 X 25mm made out 1st class teak wood as existing and all as per specification given in drawings all as specified and directed.

(b) Removing unserviceable back planks from form with back, supply and fix with appropriate size nut & bolts by new planks of size 1800 X 150 X 25mm made out 1st class teak wood as existing and all as per specification given in drawings all as specified and directed.

(c) Repair / Replace frame of form without back with 25mm square MS tube of 1.6 mm thick not less than 300mm long by arc welding where ever required all as specified and directed.

(d) Material and labour for painting to the frame of form without back with one coat of synthetic enamel paint black of Make- Asian/Shalimar all as specified and directed.

BOOK CASE STEEL CABINET WITH GLASS (FD-90 ,FD-1028):- (a) Removing of broken glass from the exsting and replacing the same of size 650x225x4mm all as per drawing all as specified and directed.

(b) Removing of old unserviceable locks of four sliding doors, supply and fix new lock for four sliding door with duplicate key all as per drawing. Make- Link/ Godrej/equivalent of approved quality all as specified and as directed.

(c) Removing of old unserviceable handles, supply and fix new handle CP steel to Book Case Steel all as per drawing and all as specified and directed.

(d) Material and labour for preparation of surfaces cleaning and painting of Book Case Steel with two coats of synthetic enamelled paint Olive Green. Make- Nerolac/Berger and all as specified and directed.

CHAIR WRITTING STEEL WITH PADDED CUSHION SEAT & BACK (FD/E6/MAP12) :- (a) Removing the unserviceable seat, supply and fix new seat made out of 12mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam as per drawing and all as specified and directed.

(b) Removing the unserviceable back, supply and fix new back made out of 12mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam as per drawing and all as specified and direall as specified and directed.

(c) Removing the unserviceable cantilever type frame, supply and fix new Cantilever type powder coated MS tubular frame 25x10mm section with rubber stopper and fixing with the seat , back and handles all as specified and shown on drawing and all as specified and directed.

(d) Removing the unserviceable hand rest, supply and fix new readymade hand rest made out of black integral skin polyurethane with 75-85 shore 'A' hardness & reinforced with MS insert with scratch and weather resistant and also to have slope towards front all as specified and directed.

CHAIR REVOLVING EXECUTIVE (TP/FD-1025) :- (a) Removing the unserviceable upholstery of complete chair, supply and fix new upholstery with approved quality and pattern all as specified and directed.

(b) Removing the unserviceable prong, supply and fix new prong with nylon 10.5mm dia zinc plated MS Castors including hydraulic gas lift as existing and all as specified and directed.

(c) Removing the unserviceable hand rest, supply and fix new readymade hand rest made out of black integral skin polyurethane with 75-85 shore'A' hardness and reinforced with MS insert with scratch and wheather resistant and also to have slope towards front all as specified and directed.

(d) Removing the unserviceable wheel, supply and fix new nylon 10.5mm dia zinc plated MS Castors as existing and shown on drawing and all as specified and directed.

CHAIR SCHOOL HAND BOARD (FD /E6 /MAP /05) :- (a) Removing the unserviceable plastic seat back (joint), supply and fix new seat back with approved quality and pattern as specified and directed.

(b) Removing the unserviceable hand board with hinges, supply and fix new hand board with approved quality and pattern shown on drawing and all as specified and directed.

(c) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel black colour complete all as specified and directed.

CHAIR VERANDAHA (MAP) ( FD/E6/MAP/II/06) :- (a) Removing the unserviceable plastic seat / back, supply and fix new seat back with approved quality and pattern as shown on drawing and all as specified and directed.

(b) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel white colour complete all as specified and directed.

Chair Varandah (FD-19(M), FD-256/359) :- (a) Material and labour for repair / fixing of broken parts of chair varandah by welding (Gas Welding) as existing where ever required all as specified and directed.

(b) Material and labour for replacing of broken MS pipe of chair varandah by welding (Gas Welding) with 20mm dia MS Conduite pipe not less than 300mm long where ever required all as specified and directed.

(c) Removing of old broken plastic cane,recaning of chair varandah with and including new plastic cane of 03/04mm semi round, white colour, best quality of approved sample, including painting with two coats of white synthetic enamelled paint on entire steel/iron surfaces of chair before recaning and including provision of new PVC shoes 20mm dia at bottom of legs after taking out old shoes all as specified including all material and labour, canning shall be done in Matt pattern all as specified and directed.

ALMIRAH MEDIUM STEEL WITH SHELVES & 1/2 S X 1/2H :- (a) Removing unserviceable legs of almirah, supply and fix new legs made out of 1mm thick MS sheet as existing by welding / revetting as per drawing all as specified and directed.

(b) Removing of unserviceable shelves from almirah medium steel, supply and fix new shelves made of 1.00mm thick MS sheet of same shape & size all as specified and directed.

(c) Removing of unserviceable 3 way locking device, supply and fix complete new locking device of same shape & size as existing and as per drawingg all as specified and directed.

(d) Removing of unserviceable handle from almirah med steel, supply and fix new CP brass handle 150mm long of approved make all as specified and directed.

(e) Removing of old unserviceable locks, supply and fix new brass lock 6 levers to almirah of Make- Link/ Godrej /Equivalent all as specified and directed.

(f) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and directed.

ALMIRAH LARGE STEEL WITH SHELVES (FD-67 (M) /1031):- (a) Removing unserviceable legs of almirah, supply and fix new legs made out of 1mm thick MS sheet as existing by welding / revitting as per drawing and all as specified and directed.

(b) Removing of unserviceable shelves from almirah large steel, supply and fix new shelves made of 1.00mm thick MS sheet of same shape & size as existing all as specified and directed.

(c) Removing of unserviceable 3 way locking device, supply and fix new locking device complete of same shape & size as existing and as per drawing and all as specified and directed.

(d) Removing of unserviceable handle from almirah large steel, supply and fix new chromium plated brass handle 150mm long of approved as per drawing, all as specified and as directed.

(e) Removing of old unserviceable locks, supply and fix new brass lock 6 levers to almirah of Make- Godrej/Equivalent as per drawing and all as specified and as directed.

(f) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces, applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and as directed.

LOCKER BED SIDE STEEL (FD-1029) :- (a) Removing unserviceable legs of locker, supply and fix new legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and all as specified and as directed.

(b) Removing of unserviceable shelves from locker bed side steel, supply and fix of new shelves made of 1.00mm thick MS sheet of same shape & size as existing all as specified and as directed.

(c) Removing of unserviceable hasp and staple of locker, supply and fix new hasp and staple of same shape & size as existing and as per drawing all as specified and as directed.

(d) Removing of unserviceable handle from locker bed side steel, supply an fix new steel handle 100mm long of approved make all as specified and as directed.

(e) Removing of old unserviceable hanging rod ,supply and fix new hanging rod CP of 20mm dia to locker all as specified and as directed.

(f) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and all as specified and as directed.

LOCKER STEEL FERROR TYPE 'A' :- (a) Removing of unserviceable hasp and staple of locker, supply and fix new 10mm hasp and staple of same shape & size as existing and as per drawing all as specified and as directed.

(b) Removing of unserviceable handle from locker bed side steel, supply an fix new steel handle 100mm long of approved make all as specified and as directed.

(c) Removing of old unserviceable hanging rod ,supply and fix new hanging rod CP of 20mm dia to locker all as specified and as directed.

(d) Removing of old unserviceable hinges ,supply and fix new hinges to locker all as specified and as directed.

(e) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and all as specified and as directed.

Teapoy Verandah (FD-255/FD-35 (M) / FD-208) :- (a) Removing unserviceable top of the teapoy verandah, supply and fix new top of size 900X450 made out of 18mm thick exterior grade particle board pasted with 1mm thick white plastic laminated sheet on top with teak wood edging of 4mm thick all around all as per drawing all as specified and as directed.

(b) Repairing frame of table with new 20mm dia round MS tube of 1.6 mm thick by arc welding where ever requiredall as specified and as directed.

(c) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint white colour complete all as specified and as directed.

DESK STEEL (FD-107/FD-1021) :- (a) Removing unserviceable box top from desk, supply and fix new box top of size 1360x510mm made out of 25mm thick preleminated particle board exterior grade one side teak finish with 4mm thick well seasoned TW Edging all round as per drawing all as specified and as directed.

(b) Removing of unserviceable legs, supply & fix new legs made out of 25mm round MS tube of 1.6mm thick by arc welding to the frame as existing and all as specified and as directed.

(c) Repairing frame of table with new 25 mm round MS tube of 1.6 mm thick by arc welding where ever requiredall as specified and as directed.

(d) Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour all as specified and as directed.

PAINTING OF STEEL FURNITURE(FD-1003/84(M):- Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting all as specified and as directed. (a) Table office Officer steel.

(b) All as perSl item No. 94 above but, for Racks steel 6'.3"X36"X24" (TP)

(c) All as per Sl item No. 94 above but, for Racks steel 6'.3"X36"X18"(TP)

(d) All as per Sl item No. 94 above but, for Rack steel 10'.6"X36"X18"(TP)

(e) All as per Sl item No. 94 above but, for Rack steel 7'.3"X36"X15" (TP)

(f) All as per Sl item No. 94 above but, for Rack steel 1905 X 915 X 760 (TP)

(g) All as per Sl item No. 94 above but, for Trestle store room iron (FD-1043,FD-86)

(h) All as per Sl item No. 94 above but, Book Shelves open large steel (FD-69)

(j) All as per Sl item No. 94 above but, Rack Steel adjustable 6 tier Steel 1905 X 915 X 605 (FD-1038)

Material and labour spray painting with two coats of synthetic enamel Paint of black colour on old painted surface with high class finish including necessary scrapping, denting & to smoothen the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/bore holes etc with paste filler to under mentioned items all as specified and as directed. (a) Rack shoes steel (FD/E6/MAP/02(R) )

(b) FMN/MNF/MNI Set (FD-220)

Shree Gajanan Furniture

SARGAM ENTERPRISES

Mahesh Traders

M/s Green Leaf Electricals

SHUBH ASHISH ENTERPRISES