Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹11.0 L+₹72,660 (7.04%)Rejected-Finance | L2 | Rejected-Finance Not a lowest bid | |
| 3 | L3₹11.2 L+₹92,240 (8.94%)Rejected-Finance FLAT NO 1 179 GANESH NAGAR S NO 10 YERAWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L3 | Rejected-Finance Not a lowest bid | |
| 4 | L4₹11.3 L+₹93,160 (9.02%)Rejected-Finance | L4 | Rejected-Finance Not a lowest bid | |
| 5 | L5₹11.5 L+₹1.2 L (11.5%)Rejected-Finance | L5 | Rejected-Finance Not a lowest bid |
Tender Value
₹14.3 L
EMD Value
₹28,700
Closing Date
1 Dec 2021, 6:00 pmClosed
GE MH AND RH KIRKEE
GE MH AND RH KIRKEE PUNE 411003
PROVN OF TWO WHEELER PARKING AT RESIDENTIAL AT CSD DEPOT KHADKI
2021_MES_487344_1
8252/E8
Open Tender
Civil Works
Item Rate
180 days
KIRKEE AND AUNDH
AS PER NIT AND TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GE MH AND RH KIRKEE
₹28,700
Yes
21 Dec 2021
10 Nov 2021
3 Dec 2021
10 Nov 2021
1 Dec 2021
24 Nov 2021
10 Nov 2021 - 17 Nov 2021
Amount
Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out compllete all as specified and directed
Removing excavated material of soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
M&L for cement concrete 1:3:6 C-2 (Using 40 mm graded stone aggregate) as in post holes and base, shed complete all as specified and directed.
M&L Steel work in tubular pipes including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and diretected.
S&F for 11 to 15 mm dia length of bolt exc 10 cm and n exc 15 cm long mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long
S&F for exc 12 mm n exc 20 mm dia Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as speceified and directed.
M&L for pre- painted galvatume aluminum zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified completed all as specified and directed.
M&L for hard core of broken stone or boulders n exc 63mm, deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true sutfaces.
M&L for 100 mm thick cement concrete 1:3:6 type C2 (40 mm graded) as in sub base.
Supply only sand for cusioning for paver block
M&L 80mm thick PVC moulded interlocking tiles M-40 machine pressed precast concrete pver blocks any size any shape conforming to IS 15658 - 2006 with grey cement and pigment laid over 50 mm river sand cusion over sub base all as as specified and directed. Note :- Sand cusion measured and paid under seprate item.
PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping bed block for hold fast, stopper, wheel track ,Haunching for drain etc. complete all as specified and directed
S&F mild steel TMT bar 8 mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia
Precast reinforced cement concrete 1:2:4 Type-B1 using 20 mm gradede stone aggregate as in cover slabs for manholes etc. including necessary formwork and placed in position complete all as specified
M&L brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 all as specified.
M&L for 15 mm thick ready mix plaster complete all as specifed, directed or as specified in manufacturers instruction etc.
M&L for applying two coats or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/Ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot tinted) with slicon additives @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over new surfaces.
M&L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed.
M&L for prepration of undecorated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
L.K.R.TIWARI CONSTRUCTION
TULSAYA CONSTRUCTION
GGS Infra
N AND G CONSTRUCTION
M/S JAYCONSTRUCTION CO
Shri Sant Cosntruction
Sunrise Traders
Aishwarya Constructions
M/s DEVRATAN ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .