ADDN/ ALTN TO EXISTING DRAINAGE AND SEWAGE LINE IN MCTE UNDER GE (MCTE) MHOW

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, laying of pipe and cables etc. but not exceeding 10sqm on plan including dressing/ trimming sides and levelling/ grading & ramming bottom of excavation and getting out in soft/ loose soil complete all as specified & directed

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) and removing rubbish out side the premises, complete all as specified & directed

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish outside MD land complete all as specified & directed

Demolition of stone slabs & tile, interlocking paver block laid bedded and pointed in cement mortar of any description or thickness in floors, aprons, cover slabs of drain etc. complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified & directed.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

M&L for mild steel TMT bars 8mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or or securing clips complete all as specified & directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs exceeding 10 cm and not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work surfaces finished fair in forms complete all as specified & directed.

M&L for Reinforced Cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in modular brick in cement mortar CM 1:6 complete all as Specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls, in cement and sand mortar 1:4 top surfaces finished even and smooth without using extra cement complete all as specified.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundations/ mass concrete complete all as specified & directed.

M&L for plain cement concrete type B0 (1:2:4) using 12.5mm graded stone aggregate as in providing cement concrete in bed block/ coping roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work, complete all as specified & directed.

M&L for preparation of new plastered/ unplastered surfaces of walls and applying two coats with cement base paint, white or tinted over one coat of cement paint primer (before application of cement base paint) complete all as specified & directed.

M&L for Plain cement Concrete (1:3:6) type C2 using 40mm gradede crushed stone aggregate as in bed to 150mm ID/ 170mm OD dia DWCPE SN-8 pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified & directed.

M&L for 150mm ID/170mm OD SN-8 DWCPE pipes (ISI Marked & Approved) premium quality single socketed in length with joints laid in trenches or in floors including all necessary fittings, joints, etc complete all as specified & directed

M&L for Plain cement Concrete (1:3:6) type C2 using 40mm gradede crushed stone aggregate as in bed to 200mm ID/232mm OD mm dia DWCPE SN8 pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

M&L for 200mm ID/232mm OD SN- 8 DWCPE (ISI Marked & Approved) pipes premium quality single socketed in length with joints laid in trenches or in floors all including all necessary fittings, joints etc, complete all as specified & directed.

Dismantling of 110mm internal dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required, complete all as specified & directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants with minimum three feet distance at wall etc complete all as specified & directed

S&F PVC (SWR) bend/ shoe 110mm bore, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified & directed.

S&F PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 110mm bore, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

M&L for Plain cement concrete type C2 (1:3:6), using 40mm graded crushed stone aggregate, 100mm thick, as in path/ plinth protection/ paving finished even and fair complete all as specified & directed.

M&L for 60mm thick, M-35 grade Machine pressed factory made precast concrete interlocking glossy finish tiles of any size and shape conforming to IS 15658-2006, laid over 40mm thick dry sand cushion interstices filled in floors/ pathway and filling outer edges with PCC 1:2:4 type B0 upto full thickness of tiles complete all as specified & directed. (Rate quoted shall deem to be included for filling outer edges with PCC) Note :- Sand cushion shall be measured and paid separately)

M&L for Sand filling under floors/ pathways or in foundations including watering and consolidation complete all as specified & directed.

M/S DADISA CONSTRUCTION

Sameer Auto Engineers

M/S UnitedConstruction

NIDHI CONSTRUCTION

ms shrilaxminarayan and sons

ENVIRO TECH SERVICES

Bharadwaj Builders