CONSTRUCTION OF LAB CUM CLASS ROOM AT ADARSHA VIDYALAYA KANAKAGIRI VILLAGE IN KANAKAGIRI TALUKA

CONSTRUCTION OF LAB CUM CLASS ROOM AT ADARSHA VIDYALAYA KANAKAGIRI VILLAGE IN KANAKAGIRI TALUKA

Earth work in surface excavation for stripping, seating of bund, Road way by

manual means for lowering & levelling the ground for all works other than

foundation & depth in Ordinary rock and soft rock...

Earth work excavation by manual means for drains,canals, waste weir draft,

approach channels, key trench, foundation of Bridges and such similar works,

as per drawing and technical specifications, inc...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Refilling available earth around trenches/pipelines,

cables in layers not exceeding 20 cm in depth,

compacting each deposited layer by ramming after

watering with a lead upto 50 m , and lift upto 1.5

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Additional for Form work centering and scaffolding for SL No 1 a Foundation upto Plinth Isolated as per Appendix I in Volume I

Providing and laying in Cement Concrete for all Basement & surface level

works, return walls, retaining walls, sunken floors etc. The granite/trap/

basalt crushed graded coarse aggregates and fine agg...

Additional for Formwork Centering and Scaffolding for Sl no 12 Beam and lintel as Per Appendix I in Vol

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Additional for formwork Cnetring and Scaffolding for Sl No 8 Coloumns and piers as per Appenix I in Volume 1

Additional for formwork Cenetring and Scaffolding for Sl No 20 Chejjas Canopy and Other Architectrual Projections of minor sections As Per Appendix I in Volume 1

Additional for formwork Cenetring and Scaffolding for Sl No 12 and 13 Beam Lintels and Roof as per Appendix I

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners

wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing Mathi/Nandi wood frames of doors, windows, clerestory

windows, ventilators and other frames, wrought, framed or assembled

including making plaster groves (excluding cost of cement concrete a...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with, stiles and rails of 35mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per dr...

Providing and laying Polished Glazed Vitrified tiles with thickness 10

mm in floor with different sizes with water absorption less than 0.08%

and conforming to IS:15622, of approved brand & manufactur...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Lettering with black Japan paint of approved brand and manufacture to give

an even shade including preparing the surface after thoroughly cleaning the

surface to remove all dirt, dust and foreign matt...

ELECTRIFICATION

Supplying heavy gauge PVC conduit pipe . dia . mm thick

confirming to IS 2509 with suitable size bends, junction boxes,

adhesive paste etc , and fixing using inverted wood plugs in case of

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick

with suitable size bends, metal junction boxes adhesive paste etc., by

groove cutting in the wall and fixing by bracing U or J hooks and

Supplying and flush mounting teak wooden box without front plank,

made of not less than 12 mm thick wood, after due groove cutting,

finishing with necessary cement plastering complete.12" x 12" x 3" (...

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with required

nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Supplying 4mm thick plastic sheet with necessary nitches for

fixing switches, regulators etc, and fixing on existing wooden or

metal box using N.F. screws.

Supplying 6A flush type socket and 6 A flush type SP switch either

surface/flush mounting in existing gang box or in 4mm thick plastic

sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing surface/flush mounting unbreakable PVC

modular box suitable for mounting modular switch plates with due

groove cutting in Brick/C.C wall, including necessary rawl plugs,

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.6A SP Switch

Supplying and fixing of slim box fitting, made out of CRCA Sheet

metal body with locking type holder completely wired. Excluding

Ballast & Fluorescent Tube.1 x 4' Tube light fitting

Supplying and fixing regular MCB distribution boards on wall/ood

board / flush mounting using required clamps, bolts, nuts etc., with

provision for fixing suitable type capacity MCB's single phase/3

Supplying capacitor type ceiling fan complete with down rod blades,

shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase

AC supply conforming to ISS-374- 1979 and with double ball be...

Fixing all types and all capacities of fluorescent /false ceiling / spot

light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders

using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to

the existing 'S'' hook with fan regulator to the existing board together

with supplying and fixing 5 A. ceiling rose, necessary ...