Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.3 LAccepted-AOC | 1 | Accepted-AOC accepted | |
| 2 | 2₹8.4 L+₹12,000 (1.44%)Rejected-Finance | 2 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | hitech engineering solution H2 | A.J.Enterprises H1 |
|---|---|---|---|---|---|
| 1.00 | Displacement (CC)/Engine apacity 700 CC-1250 CC,Max Power :20-30BHP @ 2500rpm and above,Max Torque :500NM @ 2000 rpm and above,Type of fuel:Diesel,Load Capacity :2 cu.m ,Vehicle emission Norms:BS-VI,No of cylinder in engine :2-4 cylinder ,Length of chassis :3800 mm - 3950 mm,Width of chassis :1500 mm-1550 mm & Ground clearance.150mm-165mm ,Fuel tank capacity :Diesel-30 ltrs to 40 ltrs & CNG-12-25kg ,Size of Tyre's & No's :145 R &12-5 Nos ,Wheel base : 1900 mm - 2250 mm ,Gross vehicle weight :1550 kg - 1900 kg,Clutch :Single plate dry friction diaphragm ,Transmission System :Manual ,No of speed-forward gears : 4 Nos Speeds(4F+1R),Type of steering :Manual / Power ,Speed Governors :Shall be Fitted ,Pay Load:800Kg to 1000Kg,Tipper body length :2100 mm - 2200 mm, Mild steel,Tipper body width :1400 mm - 1500 mm & Mild Steel ,Tipper body Height:750 mm - 950 mm & Mild Steel,Side portion (LH & RH) & rear doors Sheet thickness :2 mm & Mild Steel,Tipper Body top sheet including frame sheet thickness :1.6 mm & Mild Steel,Tipper Body Top Lid Sheet thickness :1.2mm & Mild Steel,Tipper Container:Tipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition should be provided on the middle of container along the vertical lenth of the body,Tipper Body Top Lid main Sheet thickness :75 x 40 x 6 mm,Hydraulic cylinder make :Reputed Make,Hydraulic system driven :Main Engine,Pump Make :As per IS standard ,Painting :Should be painted with one coat of Anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage. The color shade should be as per norms,Lettering :To be carried out as directed by Dept officers,Tipper body rear door :Shall be with necessary locking facility,Side safety guard:Shall be provided as per RTO requirement ,Addictional conditions : NOTE : Warranty Distance/ Year-25000 KM // 12 months whichever is earlier (with including GST) | 1 | No | 8,33,000 ₹8,33,000 Lowest | 8,45,000 ₹8,45,000 |
Tender Value
₹8.5 L
EMD Value
₹17,000
Closing Date
17 Sept 2025, 3:00 pmClosed
Executive Officer
Chithode Town Panchayat
Supply and Delivery of LCV (Light Commerical Vehicle-Petrol) For Solid Waste Management Purpose in Chithode Town Panchayat.
2025_DTP_603890_1
15th FC 25-26 IInd Installment
Open Tender
Vehicles/Vehicle Spares
Supply
90 days
Chithode Town Panchayat
As per Norms
2 documents required · 2 mandatory
₹0
₹17,000
19 Sept 2025
13 Sept 2025
17 Sept 2025
13 Sept 2025
17 Sept 2025
13 Sept 2025
13 Sept 2025 - 17 Sept 2025
Amount
Displacement (CC)/Engine apacity 700 CC-1250 CC,Max Power :20-30BHP @ 2500rpm and above,Max Torque :500NM @ 2000 rpm and above,Type of fuel:Diesel,Load Capacity :2 cu.m ,Vehicle emission Norms:BS-VI,No of cylinder in engine :2-4 cylinder ,Length of chassis :3800 mm - 3950 mm,Width of chassis :1500 mm-1550 mm & Ground clearance.150mm-165mm ,Fuel tank capacity :Diesel-30 ltrs to 40 ltrs & CNG-12-25kg ,Size of Tyre's & No's :145 R &12-5 Nos ,Wheel base : 1900 mm - 2250 mm ,Gross vehicle weight :1550 kg - 1900 kg,Clutch :Single plate dry friction diaphragm ,Transmission System :Manual ,No of speed-forward gears : 4 Nos Speeds(4F+1R),Type of steering :Manual / Power ,Speed Governors :Shall be Fitted ,Pay Load:800Kg to 1000Kg,Tipper body length :2100 mm - 2200 mm, Mild steel,Tipper body width :1400 mm - 1500 mm & Mild Steel ,Tipper body Height:750 mm - 950 mm & Mild Steel,Side portion (LH & RH) & rear doors Sheet thickness :2 mm & Mild Steel,Tipper Body top sheet including frame sheet thickness :1.6 mm & Mild Steel,Tipper Body Top Lid Sheet thickness :1.2mm & Mild Steel,Tipper Container:Tipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition should be provided on the middle of container along the vertical lenth of the body,Tipper Body Top Lid main Sheet thickness :75 x 40 x 6 mm,Hydraulic cylinder make :Reputed Make,Hydraulic system driven :Main Engine,Pump Make :As per IS standard ,Painting :Should be painted with one coat of Anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage. The color shade should be as per norms,Lettering :To be carried out as directed by Dept officers,Tipper body rear door :Shall be with necessary locking facility,Side safety guard:Shall be provided as per RTO requirement ,Addictional conditions : NOTE : Warranty Distance/ Year-25000 KM // 12 months whichever is earlier (with including GST)
hitech engineering solution (BID ID -1462282)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_721845.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .