Sw Providing Front Elevation Oxygen Supply pipe Line arrangmts Furniture in waiting Hall Nurses station Meeting Hall Library and Museum to the newly constrd Addtl Bldgs OP and IP Block CEMONC Block TAEI Mortuary Bio Medical Waste Room Block

Amount

supply & fixing of Gas outlet points:(Self Sealing type-Single/Dinoutlet type) with S type bracket made up of copper and the out let of non-interchangeable for other gas.The outlet points are brazed with brass bracket with self sealing valve(stainless steel) with all accessories and complete set and are converted by plastic cover duly colour coated as per specific gas and button cover etc.,complete as directed by the departmental officers and as per IS Code 12827/1989 & ISO 7396/1987 specification.

Supply and installation of Medical gas copper pipe line arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non arsencial phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (Tee,Elbow,Reducer,Coupling).The copper pipe lines should be tested suitable for a steam of working pressure of 17.34kg./cm2(17 bar) and confirm to BS 864 standard with specially made for brazed socket type connection.The medical gas copper pipeline should be tested as per standard and commissioning after painting as per international code no IS 2379/1963 Table-V.The pipe lines installed at the various wings and floors etc.,complete as directed by the departmental officers as per IS code 12827/1989&ISO 7396/1987 specification.

28mm dia copper pipe ODx0.9mm thick

22mm dia copper pipe ODx0.9mm thick

15mm dia copper pipe ODx0.9mm thick

10mm dia copper pipe ODx0.9mm thick

Supply and installation of Brass Isolation valve. suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball value of RB or Italy or reputed make,connected in line with medical gas pipe line system by using suitable size brass valve adopter union,ferrule,nipple,rubber "O" ring,taption lap and etc.All pipe line regulators shall be capable of controlling pipee line pressure and must compatible with the requirements specified in IS 12827-1989.All valves should be pneumatically tested for twice the working pressure for the gas line as per IS code 12827/1989&ISO 7396/1987 specification.

28mm dia ball valve

22mm dia ball valve

15mm dia ball valve

Supply and installation of Oxygen manifold arrangements of 2bankX12 cylinder each wing with Piston type semi automatic control panel which includes contact gauge 2 Nos.,outlet pressure gauge ,brass heavy duty Ioxregulator 2 Nos. with suitable adopter,flexible SS hose.Manifold shall be of a construction and of a designs and matreial suitable for the service pressure in accordance with IS 1282-1989.Emergency alarms with illuminating display for low / high pipe line pressure and malfunctioning of system. 1) Manifold top frame with provision for connecting 3 cylinders on right bank and 3 cylinders on left bank with high pressure interconnecting copper tubing,silver brazing,non return valve,fasteners and cylinder support middle angle frame for claping 2x12 cylinders and related fastenders.The O2 manifold should with stand a pressure of 140kg/CM2.The installation is commissioned after testing as per standards and painted as per international code and as directed by the departmental officers as per IS code 12827/1989 &ISO 7396/1987 specification.

Nitrous Oxide manifold arrangement of 2banksx3cylinder each wing,with semi automatic control panel .1)2x3 cylinder Nitrus Oxide manifold should be suitable with stand a pressure pf 140kg/CM2 and above along with high pressure copper annealed tail pipes with end brass adapter suitable for Nitrous Oxide cylinders and manifold.2) Top frame comprising of high pressure copper pipes of size 12mm ID 1.5mm wall thick with high pressure brass fittings made of high tensile brass and connections through non-return valves,high pressure copper tail pipes made of high pressure copper pipe sixe of 7mm IDx1.5mm thick.3)The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely with fitted heavy duty regulator.The manifold should be tested at 3500 pig as per IS 12827/1989& ISO 7396/1987 specification.

Supply, installation,testing and commissioning of equivalent to ingersoll rand reciprocating Air cooled type (10 HP) rating vaccum pump as per following provisions.As per IS 12827/1987&ISO 7396/1987 specification a) Vacuum pump-10HP-1 No b) Electric Motor-10HP-1No c) DOL Starter OLR-1No d) Vacuum Switch-1No e) Vacuum gauge-1No f) Control frame with fittings-1No g) Suction Scrubber-1No h) V-Belts-1No i) G.I & M.S Fittings-1No j) Brass Fittings-1No k) Exhaust silencer-1No l) Base frame for motor and vacuum pump-1Set m) Pilot line with fittings-1Set,Vacuum Room& Air compressor room inside

Supply,installation,testing,and commissioning of MS fabricated vertical mounted type 1000 liters capacity vacuum receiver tank with inlet and drain holes provided suitable to operate with vacuum pump,etc., as directed by the departmental officers.

Supply, installation,testing and commissioning of compressed air system of reciprocating Anestiwata oil Free Air Compressor belt driven type air compressor with following provisions. As per IS 12827/1987&ISO 7396/1987 specification. a) 10 HP Air Compressor-1No b) Electric motor 10HP -1No c)Dol Starter-L&T-10HP-1No d) Base frame kid(for motor and compressor)-1Set

e)Pressure switch-1 No f)Pressure Gauge-1 No g)NRV and Pilot fittings-1No h)Delivery tube-1 No i)Foundation bolts&Anchor fasteners-1No j)Belt Guard-1No k)Air Drier 50 to 60 cfm capacity-1 No.Drain ball valve-1No,Air outlet ball valve-1No, Vacuum room& Air compressor room inside Accessories: Non-return valves,Air pressure switch,pressure gauge,Isolation valves,Air filters etc., Inter connecting piping:Mild steel pipe of 2" with fittings.

Supply,installation,testing,and commissioning of MS fabricated vertical mounted type 1000 liters capacity Air receiver with inlet and drain holes provided suitable to operate with vacuum pump,etc., as directed by the departmental officers.

Supply of Flow meter with humidifier bottle flow meter should be back pressure compressed flow meter should be accurate gas flow measurement with control range 0-13 litres per minute.It should meet strict permission and dumbling standard.The meter body should be made of unbreakable polycarbonate material and auto cleavable at 134 degrees centigrade.The rate includes flow meter and its accessories (Silicon tube with mask).The cost of materials including transport-taxes etc complete as standard as directed by the departmental officers and as per IS 12827/1989 and ISO 7396/1987 specification

Supply of ward vacuum unit with gauge both mounted on a collection jar of capacity 600ml and with a wall bracket for mounting it on the wall. The collection jar should be made of unbreakable polycarbonate materials which is fully auto cleavable at 134 degrees centigrade as per standard specification and as directed by the departmental officers and as per IS 12827/1989 and ISO 7396/1987 specification.The rate includes cost of silicon hose with SS nipple on either side.

Supplying and fixing and testing of Theatre vaccum unit:the unit should comprise of two reusable 2000ml shatter resistant bottle.Each made up of poly carbonate material and fully autoclavable at 134 degree centigrade,should have a vacuum regulator with instant ON/OFF switch and tree way Left/Right or both.All the above items should be mounded on a Trolley having free moving castor wheels.

Painting with wall with texture finish paint including labour charges complete. complying with standard specification.

Manufacturing and supplying of Wooden computer work station cabin with CPU shelf, keyboard tray, drawer with lock & key arrangements and dividers. Specification for computer work station 25mm Pre laminated particle board for table top (as per approved shade) and 18mm Pre laminated particle board for legs and sides. Top to be fixed with screw connecters and metal clamps. Each cubicle, shall be provided to a size of 3' L x 2' W x 4' D. The top of the table was covered with Pre laminated particle board on three sides for a height of 1.5'. Floor bushes shall be fixed at wherever necessary. The cost includes cost of materials cost of primer, enamel paint and labour charges for fabrication, cutting, bending, welding, grinding, painting, power consumption for fabrication, loading, unloading and conveyance and supplied at work site etc.,

Manufacturing and supplying of PVC Chair.The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position etc.,

Manufacturing and supplying of steel perforated chair 3 in 1 of size 75x40x1800 mm made out of 18 gauge steel perforated chair 3 in 1 with nickel chromium plated handle and leg with powder coat finish. The rate excluding of all taxes and includes cost of all materials, labour, transports and other incidental charges, including providing in the position etc.,

Manufacturing and supplying of S Type Chair of size 450x500x900mm. The chair frame made of 1.5" 16 gauge powder coated M.S pipe knitted with nylon for seat and back rest. Countrywood handles shall be provided. Necessary pushes shall be fixed. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, transportation as applicable and supply to worksite etc.,

Manufacturing and supplying of SS round Type stool of two feet height. The chair frame made of SS material all supports . The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, transportation as applicable and supply to worksite

Supplying and Fixing of Titanium brass letters Stainless steel letters with titanium coating.Front facia with 304 grade SS material and 40 mm projection.Including 3mm ACP Sheet female base to support LED for lighting(Back light) purpose .LED lights with 3 years replacement warranty & power supply [SMPS] with 1 year replacement warranty.

Supplying and Fixing of SS lip Logo ( 3mm white acrylic in front and stainless silver side finish.including 3mm ACP Sheet female base to support LED for lighting(Back light) purpose .LED lights with 3 years replacement warranty & power supply [SMPS] with 1 year replacement warranty).

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Supplying and laying polyester,washable and stainfree cloth (Bio-Active fabric washable germfree suitable for dialysis room) curtain system with maximum curtain cloth height 230cm (top 30cm white colour net and 200cm light blue colour as per approval) stitching with stiffener tape,pleats,ironing and laying around Each bed using sliding wheels two nylon rollers,nylon axil and tangle free nylon swivel stem with chrome-plated steel hook,curtain track should be supported in roof using 20x20mm,2mm thick sized aluminium tubes same spec with end caps in two sides using all necessary fittings.as per the direction of Engineer in charge including conveyance to site,laying in line and level,sealing all cutting in false ceiling with powder coated MS cup,all leads and lifts including all labour charges etc.,complete.(unpleated length of the cloth measurement will be considered for payment also the bottom and top folding will not be considered in cloth measurement) supplying and fixing powder coated 20mm dia.GI round tube hanging support of required length(app.length 1.10m)one end fixing from slab by using 6mm dia expansion bolt at a distance not more than 2m c/c down end fixed to powder coated aluminium channel frame 45x20x1mm thick section by using SS screw etc.,

P and C Projects Private Limited (BID ID -1378454)

GMS Elegant Builders I Pvt Ltd (BID ID -1378577)