SPECIAL REPAIR TO ELECTIC CABLES, PANELS INCLUDING ALLIED WORKS AND BR REPAIR TO POWER HOUSE I AND II AT AF STATION AMRITSAR

Amount

Building Work

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter from the frames) complete all as specified & directed.

Taking down chowkats or frame with shutter exc 1.50sqm but n.exc 4Sqm each (without taking off shutter from the frames) and making good the distrubed surface complete all as specified & directed.

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc of size 105x60mm complete all as specified & directed.

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc of size 125x60mm complete all as specified & directed.

M&L PCC 1:2:4 type B-0(using 12.50mm graded crushed stone aggregate) as in back filling of of pressed steel frames complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wooden grain printed both side PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & directed.

S&F 30mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

S&F glazed and skeleton shutters 35mm thick of 2nd class hard wood open rebated and prepared to receive gauge & glass etc with edge of sash bar and number edges of framing plain chamfered beads for securing glass etc size of number of shutters as spd SSR Part-I & section 8 clause 8.23 & (a) complete all as specified & directed.

S&F butt hinges med weight cold rolled mild steel 100mm size complete all as specified & directed.

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as specified and directed.

S&F extruded Aluminium anodized barel tower bolt of extruded sec 150mm long complete all as specified & directed.

S&F extruded Aluminium anodized barel tower bolt of extruded sec 200mm long complete all as specified & directed.

S&F extruded Aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified & directed.

S&F extruded Aluminium alloy handle fabricated type anodized of size 200 mm long complete all as specified & directed.

S&F 150mm floor door stopper of aluminimum alloy body and tongue anodized with hard drawn steel spring complete all as specified & directed.

S&F 200mm size, mild steel ordinary rat tail rod pattern spring,including roller and roller plate fixed in repaircomplete all as specified & directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel frame or in wooden frame of door/ window with MS flat with screw or wooden beading where required and match the surface complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed

M&L for two coats of synthetic enamel paint on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed

M&L 15mm thick cement plastering in CM 1:6 on brick or concrete surfaces finished the surfaces even and smooth without using extra cement and applying two coats of water based distemper over a coat of alkali resistant primer on plastered surfaces with and including taking down existing plaster complete all as specified and directed

M&L 15mm thick cement plastering in CM 1:6 on brick or concrete surfaces finished the surfaces even and smooth without using extra cement and applying three coats of white wash on wall surfaces with and including taking down existing plaster complete all as specified and directed

M&L 5mm thick cement plastering on ceiling in CM 1:3 and applying three coats of white wash on plastered surfaces with & including taking down existing plaster complete all as specified and directed.

M&L 15mm thick cement plastering on fair faces of brick or concrete surfaces in CM 1:4 finished the surfaces even and fair using water proofing compound with & including taking down existingcomplete all as specified and directed (upto height 12 mtr) Note : WPC shall be measured and paid separately.

M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed

M&L Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on ceiling complete all as specified and direceted.

M&L Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of water based distemper on wall complete all as specified and direceted.

M&L for complete removal of existing treatment and applying two coats of cement based paint complete all as specified and direceted.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and direceted.

S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in sqaures n.exc 0.5 sqm in each panes including taking out of old broken glass (any thickness, size, quality or description) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed

S&F in repair steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises of glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (i) Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window, (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (vii) M S guard bar 08mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately.

S & F rotational moulded polytheylene triple layered (white) water storage tanks of capacity 500 Litres (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank with and including providing Ball brass valve 20mm dia bore of pipe with Polythene float and fly nut complete as specified and directed.

S&F 20 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes fixed in repairs complete as specified and directed.

S&F in repair, 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level white with inlet, ball valve, float, flush pipe and handle including brackets, 32mm bore PVC flush pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed.

S&F in repair bib cock, long body, cast copper alloy chromium plated fancy type15mm bore of pipe with capstan handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F stop valves/angle valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle for 15 mm bore of pipe fixed as in repairs complete all as specified and as directed.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with integrnal foot rests with `P’ or `S’ trap including water connection to trap and flushing pipe and excluding flushing cistern etc with and including bedding in PCC 1:7:12 type F-2 complete all as specified and as directed. Note:-Flushing cistern to be paid separately.

S&F in repair Vitreous china wash basin,white flat back,size 550x400mm excluding taps,waste,chain and plug and porcelain stopper but including brackets, and 32mm bore CP waste coupling complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy (fancy type) with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore of pipe complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm. complete all as specified and as directed.

S&F in repair PVC waste pipe flexible 32mm/40mm bore, 60cm long for WHB & Sink complete all as specified and as directed.

S&F waste Coupling of PTMT half or full threaded 32 mm dia for kitchen sink fixed in repairs complete all as specified and directed.

S&F in repairs Grating doom CP 100 mm dia and as required waste pipe hole (minimum weight 25 gms) fixed complete all as specified and directed.

S&F in repair Cast copper alloy, chromium plated shower rose with swivel joints of size 125 mm (fancy type) with CP neck 225mm long made to shape complete all as specified and directed.

S&F in repair CP brass Tubular towel rail 60 Cm long between the flanges 20mm dia fixed to wall with screws and plastic cleats complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back size of 465x355x265mm white with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar with and including fixing suitable automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

M&L for ceramic glazed concept pattern type coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado with & including taking down old unserviceable tiles complete all as specified and directed.

M&L for non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or colured cement to match over 15 mm thick screed bed in CM 1:6 with & including taking down old unserviceable tiles complete all as specified and directed.

S&F in repair GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including taking down and making good the chases etc in CM 1:3 after fixing of pipe,complete all as specified and directed. Note: Rates quoted shall deemed to be included for cutting of chases and making good to match the existing surfaces.

S&F in repair GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including taking down and making good the chases etc in CM 1:3 after fixing of pipe, complete all as specified and directed. Note: Rates quoted shall deemed to be included for cutting of chases and making good to match the existing surfaces.

S&F in repair Concealed stop cock cast copper alloy, chromium plated 15mm bore of pipe, screwed down high pressure with crutch or buterfly handle, screwed both ends for pipes or for unions with & incl making good the distrubed surface to match the existing surface complete all as specified and as directed.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level complete all as specified as directed.

M&L for cement cocnrete type C-1 (1:3:6) using 20mm graded stone aggregate 50mm thick as in plinth protection finishing the surface even & smooth without using extra cement with and including filling the joints with mastic filling/sealing compound gde 'A' complete all as specified as directed.

M&LSteel rolling shutters of 1.25 mm thickness of lath, without ball bearing, as specified including top cover, anchoring rod, spring as required, hasp and staple and one shop coat of primer; erected in position as indicated but gear operated type with bevel gear box and crank handle and fixed the clamp of shutter on wall surface and locking arrangement and making good in CM (1:3) or PCC 1:2:4 type B-1 fixed in repairs and making good the disturbed surface with cement plaster or cement concrete to match the surrounding surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base finished the surface even & rough complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:2:4 type B-2( using 40 mm graded stone aggregate), as in flooring finished even and fair without using extra cement complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base finished even & rough complete all as specified and directed.

S&F glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors, with & including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed

M&L 25mm sand filling under floor incl watering and consolidation complete all as specified and directed

M&L for polishing of Old surfaces of Kota stone flooring, intial preparation includes grinding the surface evenly with machine fitted fine grade blocks (No. 120) thereafter final grinding with machine fitted with the finest grade grit blocks (No. 320) to be carried out the day after the first grinding completed. After the final polish, oxalic acid shall be dusted over the surface at the rate of thirty three (33) gms. per square metre sprinkled with water and rubbed hard with pad of wooden rags. The following day the floor shall be wiped with a moist rag and dried with a soft cloth and finished clean complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-23 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed .

M&L Brick work with old size sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:4 complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&LSteel rolling shutters of 1.25 mm thickness of lath, without ball bearing, as specified including top cover, anchoring rod, spring as required, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manually type and fixed the clamp of shutter on wall surface and locking arrangement and making good in CM (1:3) or PCC 1:2:4 type B-1 fixed in repairs and making good the disturbed surface with cement plaster or cement concrete to match the surrounding surface complete all as specified and directed by Engineer-in-charge.

S&F Ball bearing for rolling shutter complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed.

Dismantling PVC 110mm bore of pipe fixed with rubber ring joints including clamps etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore in any length with rubber ring joint fixed to wall/floor including clamp complete all as specified and directed.

S&F PVC (SWR)bends 110mm dia, in any radius, complete all as specified and directed.

EXTERNAL ELECRIFICATION WORK

Dismantling old unserviceable cement concrete poles of any size complete all as specified and directed.

Taking down existing serviceable street light and bracket, M.S. channel or angle sections etc and re-use/refixing the same on new steel tubular sawage pole complete all as specified and directed.

Supply & Fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified, type 410 SP-31 (9 metres long) complete all as specified and directed.

Material and labour plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation of poles mass concrete etc complete all as specified and directed.

Material and labour plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in puff/coping of poles etc including use and waste of form work complete all as specified and directed.

S & F Bracket made out of GI pipe light grade 40 mm dia bore 1.50 mtr long duly welded with MS pipe capacity of 100mm dia, 30 cm long with holes, nuts, bolts and fixing on the top of pole complete all as specified.

S & F High efficient LED street light of 60 W Capacity with lens made of pressure dia cast aluminum housing, extruded aluminum heat sink & enclosed with toughened glass, IP 66 protection suitable for high mast light fitting with all necessary accessories fixed in repair complete all as specified and directed. Make:- Crompton Cat part No:- LSTP-60-CDL-M or equaivlent make specified here-in-after.

Supply and fixing street light junction box insulated and made out of environment friendly, recyclable, UV resistant, halogen & silicon free,polycarbonate with glass fiber reinforced of size in mm should be not less then 205 X 255 X 112mm. The box shall be rated for Degree of Ingress Protection IP 66/67 including all fixing material as required all as specified and directed. Make: cat. Part no KF2525 of Hensel or equivalent make specified here-in-after

Supply and fixing 0.75 Sqmm (nominal area) copper conductor, twin core, FRLSH, PVC insulated sheathed cable, drawn in steel pole for connection to street light fitting and making connections, including taking down old cable, complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cables and foundation of poles etc. and getting out complete all as spceified and directed.

Returning, filling in trenches (soil) including spreading leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of surplus excavation soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protection prependicular to the direction of cable adjacent to each other complete all as specified and directed.

Supplying and laying, factory made unreinforced precast cement concrete cable cover HV type-1, flat, of size 300x180x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

M&L GI pipe light grade 100 mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc as per site requirement complete all as specified and directed.

M&L GI pipe light grade 50 mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc as per site requirement complete all as specified and directed.

M&L GI pipe light grade 40mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc as per site requirement complete all as specified and directed.

Supply, laying, jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric power cable (heavy duty) with alumininum conductor cross sectional area 70 Sqmm 3.5 core LT, 1100 volts grade, laid in trenches, along poles or passing with through pipe or laid under floor or through/ on walls etc complete all as specified and directed.

Supply, laying, jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric power cable (heavy duty) with alumininum conductor cross sectional area 50 Sqmm 3.5 core LT, 1100 volts grade, laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, complete all as specified and directed

Supply, jointing & testing, outdoor type cable end termination joint (Heat shrinkable) complete with jointing material and accessories suitable for 3 wire, 11 KV (Earthed) grade, HT underground XLPE insulated armoured aluminium conductor, 3 core 95 sqmm size cable complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by GI pipe 15mm bore (light grade) and 20mm bore (light grade) GI watering pipe, etc all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers, 20 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate. Note : RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts & washers of galvanized iron or steel, procteded by GI pipe 40 mm bore ( light grade) and watering pipe 20mm bore GI pipe (light grade ) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers, 20 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

Supply & fixing of high intensity, long range, UDCA mounted, manual mounted, LED search light, Min. beam range 600 meters, 1x300w, LED, Efficiency > 140 lm/w, PF > 0.95, CCT 5000K-6500K, CRI >80, Optical grade lens-reflector having efficiency > 95% & narrow beam 5 degree, Anti-UV oxidation, die cast LM6 body with air fins, fully powder coated, working voltage 150-280, 50hz, constant current, Min. lux 3000 at 10 meter with circle of approx 1 meter, IP-66, meets the standard of LM79, LM80, IS:10322 & IS:13383. The above search-light would be installed on “UDCA" stand (1 meter above from roof) and The operating lever of UDCA would be in shoulder height to enable the rotate luminary easily from inside of the watch-tower 360° in horizontal plane & vertical movement > 30° bulit-in locking knob. All bushes of UDCA will be made by gun metal, hardware will be in S.S. and others metal parts would be Zinc electroplated / powder-coated for outdoor installations and having 3 nos. foundation holes at bottom. Cat No.: RSL-LRFLL-25PC25, Make: Kalin or equivalent make specified here-in-after Note:- Making hole in existing surface/roof/floor and making good are included in the contract rate.

Supply, laying, jointing, testing and commissioning of High Tension (HT), 11000 Volts (earthed) grade, XLPE insulated, screened, PVC bedded, galvanized steel strip armoured, electric power cable (heavy duty) with stranded aluminum conductor, cross sectional area 95 Sqmm, 3 core underground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, as in repair complete all as specified and directed.

Note: The Total amount shall subject to adjustment of credit of Rs. 91835.00 for old Materials as per Schedule of Credit.

L-7 Primewave Communications

kapoor and co

M/s AKG Engineers & Contractors