Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC 9 EZRA STREET KOLKATA 700 001 | KOLKATA | KOLKATA | WEST BENGAL | 700001 | L1 | Accepted-AOC Being the lowest bidder. | |
| 2 | L2₹39.2 L+₹3.7 L (10.5%)Rejected-AOC VILL PO CHOMON NEAR AIR FORCE STATION ADAMPUR JALANDHAR PB | JALANDHAR | JALANDHAR | PUNJAB | L2 | Rejected-AOC Being other then the lowest bidder. | |
| 3 | L3₹43.4 L+₹7.9 L (22.2%)Rejected-AOC 1 PROP A R ELECTRICALS SCHOOL LINE MINNIE BAY JUNCTION PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-AOC Being other then the lowest bidder. | |
| 4 | L4₹46.2 L+₹10.7 L (30.2%)Rejected-AOC 244 22 ONKAR NAGAR B TRI NAGAR TRI NAGAR NEW DELHI 110035 NORTH WEST DELHI DELHI 110035 INDIA | NORTH WEST DELHI | DELHI | 110035 | L4 | Rejected-AOC Being other then the lowest bidder. | |
| 5 | L5₹46.7 L+₹11.2 L (31.6%)Rejected-AOC VILL PO PS BELLATORE DIST BURDWAN PIN 722 203 WEST BENGAL | BELLATORE | BURDWAN | WEST BENGAL | 722203 | L5 | Rejected-AOC Being other then the lowest bidder. |
| Sl No | Description | Qty | Unit | Prasur Electricals & Engineering Co. H7 | NIRMAL SALES CORPORATION H4 | KMT INDUSTRIES H3 | A. R. ELECTRICALS H5 | M/S ABHINABA ENTERPRISE H1 | M/S ANANDA ENTERPRISE H2 | M/S JAI ENGINEERS H6 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, laying & testing cable HT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., complete all as specified and directed. | 358 | RM | 949 ₹3,39,742 Lowest | 1,150 ₹4,11,700 | 1,135 ₹4,06,330 | 1,015 ₹3,63,370 | 1,185 ₹4,24,230 | 1,120 ₹4,00,960 | 1,300 ₹4,65,400 |
| 2.00 | M&L cable jointing kit for 11 KV(Earthed) grade cable for outdoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 to 95 sq mm, complete all as specified and as directed. | 2 | Each | 5,850 ₹11,700 | 7,920 ₹15,840 | 8,000 ₹16,000 | 800 ₹1,600 Lowest | 12,000 ₹24,000 | 9,000 ₹18,000 | 6,500 ₹13,000 |
| 3.00 | Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil, complete all as specified and directed. | 282.66 | Cum | 192 ₹54,270.72 | 220 ₹62,185.2 | 250 ₹70,665 | 200 ₹56,532 | 290 ₹81,971.4 | 266 ₹75,187.56 | 140 ₹39,572.4 Lowest |
| 4.00 | Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cm in soft / loose soil, complete all as specified and directed. | 201.38 | Cum | 45 ₹9,062.1 Lowest | 90 ₹18,124.2 | 85 ₹17,117.3 | 80 ₹16,110.4 | 100 ₹20,138 | 99 ₹19,936.62 | 95 ₹19,131.1 |
| 5.00 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. | 81.28 | Cum | 42 ₹3,413.76 Lowest | 120 ₹9,753.6 | 135 ₹10,972.8 | 120 ₹9,753.6 | 150 ₹12,192 | 142 ₹11,541.76 | 50 ₹4,064 |
| 6.00 | Supply and lay for dry, clean, dirtless river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying & punned down to required height, complete all as specified and as directed.
Note : Only punned thickness shall be measured & paid. | 69.57 | Cum | 1,475 ₹1,02,615.75 | 1,230 ₹85,571.1 | 1,250 ₹86,962.5 | 1,200 ₹83,484 Lowest | 1,266 ₹88,075.62 | 1,252 ₹87,101.64 | 1,200 ₹83,484 Lowest |
| 7.00 | Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 with peak, flat, size 300mm x 180mm x 40mm, complete all as specified and directed. | 1,788 | Each | 39 ₹69,732 | 50 ₹89,400 | 45 ₹80,460 | 40 ₹71,520 | 52 ₹92,976 | 48 ₹85,824 | 30 ₹53,640 Lowest |
| 8.00 | M&L fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and directed. | 4.03 | Per 1000 Nos | 9,800 ₹39,494 | 12,000 ₹48,360 | 10,800 ₹43,524 | 10,000 ₹40,300 | 11,200 ₹45,136 | 11,200 ₹45,136 | 9,000 ₹36,270 Lowest |
| 9.00 | M&L earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized strip of 32 mm x 6 mm earth lead by means of nuts bolts check nuts GI washers earth strip protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. | 6 | Each Set | 8,250 ₹49,500 | 7,200 ₹43,200 | 7,500 ₹45,000 | 7,000 ₹42,000 | 8,000 ₹48,000 | 7,620 ₹45,720 | 6,500 ₹39,000 Lowest |
| 10.00 | Design, Supply, installation, testing and commissioning of Outdoor type 11 KV package Compact Secondary Substation/ Compact station (CSS) (IEC:62271-202 & IEC-61330 / IS : 14786), comprising cast resin/VPI dry type transformer, LT panel VCB with all interconnections, metering, protection, internal HT XLPE cable and LT copper bus duct suitable for short circuit current wiring, internal earthing connections, type tested as per IEC codes including foundation etc. as per manufacturer's instructions. The height of the foundation should not be less than 0.6 mtr from NGL and consisting of following sub-systems and meeting following specifications and parameters :-
ENCLOSURE SECTION:
(a) CPRI approved CRCA Sheet steel housing 3.15 mm thick with corrosion resistance and all side openable hinged door and lock and key arrangements. (b) Steel parts are tested as per IS 6988. (c) Engineered for smooth air flow for natural cooling. (d) No direct access to High voltage parts. (e) GI strip earthing for all LV and HV equipments as per laid down policy. (f) Separate earthing for lightening protection and lightening spike, etc. (g) Separation steel sheet wall for VCB / Transformer / LT panel. (h) Heave lifting lugs with all equipments load. (j) Slopped roof. (k) Necessary danger plates outside of the CSS. (l) Necessary HT and LT cable / Earth strips opening. | 1 | Each | 25,59,000 ₹25,59,000 Lowest | 35,50,000 ₹35,50,000 | 35,99,000 ₹35,99,000 | 33,75,000 ₹33,75,000 | 37,15,000 ₹37,15,000 | 36,22,000 ₹36,22,000 | 29,55,000 ₹29,55,000 |
Tender Value
₹39.5 L
EMD Value
₹78,900
Closing Date
15 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PANAGARH
HQ CWE PANAGARH, MES, PO - PANAGARH, DIST - BURDWAN, WB, PIN - 713420
PROVN OF EXTERNAL ELECTRIC SUP FOR POI AT PMS UNDER GE PANAGARH
2025_MES_717751_1
8300-013/E8
Open Tender
Electrical and Maintenance Works
Item Rate
210 days
PANAGARH
Pls refer Tender Documents
7 documents required · 7 mandatory
₹500
GE PANAGARH
₹78,900
Yes
10 Sept 2025
1 Jul 2025
22 Aug 2025
1 Jul 2025
15 Aug 2025
31 Jul 2025
Amount
Supply, laying & testing cable HT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., complete all as specified and directed.
M&L cable jointing kit for 11 KV(Earthed) grade cable for outdoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 to 95 sq mm, complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil, complete all as specified and directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cm in soft / loose soil, complete all as specified and directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.
Supply and lay for dry, clean, dirtless river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying & punned down to required height, complete all as specified and as directed. Note : Only punned thickness shall be measured & paid.
Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 with peak, flat, size 300mm x 180mm x 40mm, complete all as specified and directed.
M&L fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and directed.
M&L earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized strip of 32 mm x 6 mm earth lead by means of nuts bolts check nuts GI washers earth strip protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed.
Design, Supply, installation, testing and commissioning of Outdoor type 11 KV package Compact Secondary Substation/ Compact station (CSS) (IEC:62271-202 & IEC-61330 / IS : 14786), comprising cast resin/VPI dry type transformer, LT panel VCB with all interconnections, metering, protection, internal HT XLPE cable and LT copper bus duct suitable for short circuit current wiring, internal earthing connections, type tested as per IEC codes including foundation etc. as per manufacturer's instructions. The height of the foundation should not be less than 0.6 mtr from NGL and consisting of following sub-systems and meeting following specifications and parameters :- ENCLOSURE SECTION: (a) CPRI approved CRCA Sheet steel housing 3.15 mm thick with corrosion resistance and all side openable hinged door and lock and key arrangements. (b) Steel parts are tested as per IS 6988. (c) Engineered for smooth air flow for natural cooling. (d) No direct access to High voltage parts. (e) GI strip earthing for all LV and HV equipments as per laid down policy. (f) Separate earthing for lightening protection and lightening spike, etc. (g) Separation steel sheet wall for VCB / Transformer / LT panel. (h) Heave lifting lugs with all equipments load. (j) Slopped roof. (k) Necessary danger plates outside of the CSS. (l) Necessary HT and LT cable / Earth strips opening.
Item No. 10.00 Contd....... HT SECTIONS: (m) One No Horizontal draw out with Vaccum Circuit Breaker (VCB) manual and 230 V AC motor operated spring charging mechanism with 24V DC closing/ opening shunt trip coils, Aux. switch, Mechanical on/off push button, mechanical opening counter with metering cubical auxilliary relay, under voltage relay, 8 window annunciator, battery power pack with suitable capacity of battery & in built charger for 24V circuit insulated stainless steel enclosure, 11KV / 630 AMP 25KA with rupturing cap 350 MVA and one metering Module (CVCM) with necessary CTs and PT MVA alongwith and earth fault relay enclosed in sheet steel tank with metering and protection of transformer self powered microprocessor based numerical relays & dedicated CTs for protection of transformer with following specifications: (i) Potential transformer - Single phase cast resin of ratio 11kv/110v, class-0.5, 100VA with HT primary fuses. (ii) Current Transformer - cast resin Ratio : 50-25/5+5A, Core 1:Cl.0.5, 15VA, Core2:Cl.5P10, 15 VA. (iii) Protection Numerical 20C + 1EF Relay. (iv) Auxiliary Relay. (v) Master trip relay. (vi) Trip Circuit supervision relay. (vii) Micro procrssed based Non- Directional IDMT. (viii) Indication lamps VCB off/ on/ auto trip/ trip circuit healthy/ spring charge indication.
Item No. 10.00 Contd....... TRANSFORMER SECTION: (n) One No Transformers 160 KVA, copper wounded dry rasin cast / VPI dry type (IS:11171 & IEC-60076-11) distribution type 11 KV/433V, 3 phase, 4 wire LT output, 50 Hz, AN, Dyn11, Delta / Star, insulator class - F, naturally cooled, dry type transformer suitable for indoor installation, with offload tap changer with steps ±2.5% up to ±5.0% on HT side with all necessary standard fittings and accessories complete after necessary testing after completion with the following specifications :- (i) Transformer Standard KVA rating :- 160 KVA. (ii) Primary Voltage :- 11 KV AC. (iii) Secondary Voltage :- 433 V AC. (iv) Neutral earthing should be solidly earth system. (v) Frequency :- 50 Hz with ±3% tollarence. (vi) Vector Group :- DYn11. (vii) The losses at the rated voltage should be within the specified limit as per IS upto latest edition. (viii) The transformer enclosure should be with robust construction and shall be built of electricall welded MS sheet wire mesh or perforated sheet for ventilation, with lifting lugs, pulling lugs, top cover fixing bolts, rollers and enclosure base channels. (ix) The necessary HT and LT bushing as per IS 3347 and ammended up to date. (x) HT & LT terminals for cable connection shall be brought through side wall mounted bushing to a cable box with necessary cable entry and glands fixed on both side. (xi) Transformer should have necessary terminal marking plates and rating plates.
Item No. 10.00 Contd....... Outgoing (i) 100 A, 4P MCCB, 35KA with electronic release - 2 Nos, (ii) 32 A, 4P MCCB, 35KA with electronic release - 03 Nos. (iii) 16 AMP 04 Pole MCB - 02 Nos. (p) Necessary interconnections for HT and LT equipments with suitable size insulated copper busbar. (q) Necessary foundation for installations of CSS. (r) Tested as per IEC / IS Code. (s) Including PCC foundation as per manufacturer's design / drawings (The height of the foundation should not be less than 0.6m from NGL & PCC work including in unit cost. Note : (I) The entire sketch, drawing & design & make of spare parts of CSS should be submitted by contractor from approved manufacturer within one week of sample approval & the same shall be approved by GE before ordering the materials to manufacturer's by contractor. (II) The unit rate quoted by bidder is inclusive the following aspects: - (i) Design, Drawings, supply, installations, commissioning & testing, transportation of CSS & after sales services upto 2 years. (ii) Payment shall be made after submission of original invoice/ purchase voucher (verified by Engr-in-Charge), Manufacturer's Test Certificate, Guarantee Certificate of 2 years from contractor & warranty certificate from manufacturer.
M&L RCC cable route indicator of size 1300x300x100 mm duly written "HT CABLE" in block letter, duly engrave as MES and painted with synthetic enamel paint over one coat of primer and fixing with PCC (1:3:6) C2 using 40 mm graded stone aggregate in 600x450x300 mm for fixing route indicator, complete all as specified and directed. [Note : (i) Unit rate of item includes excavation, PCC foundation for erection of route indicator. (ii) Slab of route indicator to be provided with proper TMT bars in reinforcement. (iii) Route indicator RCC slab to painting with two coat of red/blue colour synthetic enamel paint over on one coat of white primer base all as specified and directed by Engr-in-Charge.]
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core, complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core, complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core, complete all as specified and directed.
S&F Galvanised Iron Pipe 80mm Bore (dia) ‘Light Grade’ for protection of UG Cable, laid in Floors/ Road Crossing, fixing to Pole with Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and directed.
S&F Galvanised Iron Pipe 50mm Bore (dia) ‘Light Grade’ for protection of UG Cable, laid in Floors/ Road Crossing, fixing to Pole with Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and directed.
Labour only for Horizontal Boring by means of HDD machine for Passing Protection Pipe up to 80mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and directed. Note : Pipe to be measured separately.
S&F Galvanised Iron Pipe 100mm Bore (dia) ‘Light Grade’ for protection of UG Cable, laid in Floors/ Road Crossing, fixing to Pole with Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and directed.
S&F Metal cable route indicator of height 750 mm MS Flat of 40 mm x 4 mm with Circular 100 mm diameter MS Sheet of minimun thickness 3 mm duly engraved " LT CABLE" including Aluminium paint over it and to be fixed 150 mm below ground level with PCC (1:3:6) (40 mm aggregate) of size 250x250x300 mm, complete all as specified and directed.
M/S ANANDA ENTERPRISE (BID ID -3387577)
KMT INDUSTRIES (BID ID -3387533)
NIRMAL SALES CORPORATION (BID ID -3387065)
A. R. ELECTRICALS (BID ID -3387586)
M/S JAI ENGINEERS (BID ID -3387172)
Prasur Electricals & Engineering Co. (BID ID -3386962)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .