A/R and M/O to DA Flats Haiderpur under PWD Sub Division NW B-13 During 2020-21 (SH- Providing and installation of Open Gym Equipments at DA Flats (Type-IV) in ground )

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m .All kinds of soil.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and Installation of AERIAL STROLLER /AIR WALKER of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of Air Walker as per standard given by the manufacturer. The Air Walker fabricated with main post of 114mm O.D. dia “c” class GI pipe as per IS-1239 other pipes of 40mm dia “c” class GI pipe G.I. Pipe as per IS-1239 having powder coated 80-120 micron at thick G.I. using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic type welding. All open ends of pipe to be closed with GI/ LLDPE/ FRP caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding/FRP material. A High quality grip rubber should be used on handles, Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s s manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of SIT UP BOARD DOUBLE of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of of SIT UP BOARD as per standard given by the manufacturer. Sit up board made from “c” class G.I. pipe. The main frame is of 32mm NB made from “c” class G.I. pipe. The remaining frame of the sit up board is 25mm NB made from “c” class G.I. pipe. A performed G.I. sheet in 2mm is welded on main frame. The foundation pipes are embedded in CC block (which shall be paid separately) and painting by powder coating mall. G.I. using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic type welding. All open ends of pipe to be closed with GI/ LLDPE/ FRP caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding/FRP material. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of SURF BOARD DOUBLE OF MAKE ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of SURF BOARD as per standard given by the manufacturer. The Surf Board fabricated with main post of 114mm dia “c” class GI pipe. G.I. Pipe as per IS-1239 Handrest of the pipe 40mm dia “c” class GI pipe G.I. Pipe as per IS-1239 having powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic type welding with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE/FRP material Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE/ FRP caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:-deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineering- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of AERO RIDER/ HORSE RIDER of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of HORSE RIDER as per standard given by the manufacturer. main post of 80 N.B. and “c” class GI pipe G.I. Pipe as per IS-1239 and rest of the pipe 40mm dia and “c” class GI pipe G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Base plate cover and seat to be made up from virgin LLDPE/FRP material. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be pre approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE/ FRP caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing & fixing of Dual SKY WALKER/DOUBLE CROSS WALKER of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of SKY WALKER as per standard given by the manufacturer. main post of 114mm dia and “c” class GI pipe G.I. Pipe as per IS-1239 and rest of the pipe 40mm dia a G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE/FRP material. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE/ FRP material caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of SHOULDER TWIRL DOUBLE / BIG SHOULDER WHEEL make of ARIHANT/LEO/LANDSCAPE STRUCTURES/KOMPAN. Design, Shaped and size of SHOULDER TWIRL DOUBLE as per standard given by the manufacturer. fabricated with main post of 114mm “c” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel of 80-120mm micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of HIP TWISTER DOUBLE make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of HIP TWISTER DOUBLE as per standard given by the manufacturer. with main post of 114mm and “c” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic TYPE welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Rotating and base plate cover to be made from virgin LLPDE/FRP material. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of DOUBLE SHOULDER EXERCISE/PULL CHAIR of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size SHOULDER EXERCISE as per standard given by the manufacturer. with main post of 114mm dia and “c” class GI pipe G.I. Pipe as per IS-1239 Handrest of the pipe 40mm dia and “c” class GI pipe G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury seat and base plate cover to be made up from virgin LLDPE/FRP material. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE/ FRP material caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of CHEST PRESS/SEATED CHEST PRESS (DOUBLE) make of make ARIHANT/LEO /LAND SCAPE/ KOMPAN. Design, Shaped and size of CHEST PRESS DOUBLE as per standard given by the manufacturer. main post of 114mm and ”c” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Seat and base plate cover to be made from virgin LLPDE/FRP material. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of HAND ROWER/ROWER MACHINE of make ARIHANT /LEO /LANDSCAPE/ KOMPAN. Design, Shaped and size of ROWER MACHINE as per standard given by the manufacturer with main post of 114mm dia and “c” class GI pipe and FRP (Fiber Reinforced Plastic seat with backrest is fixed over 40NB Galvanized bend pipe. This bend pipe is further linked to 80 N. B base pipe & ”c” class GI pipe with help of connecting links. Connecting links are made up of 25NB G.I. pipes with specially designed metal bush at ends. The paired 25NB pipe handle with rubber grip at the end is fixed over one of the connecting link. The rolling frame is made by 40 NB & 20 NB G.I. pipes. Connecting links are hinged in between seat frame and base frame with specially designed bush bearings. A suitable PVC/ rubber grip is provided for foot rest on seat frame. All pipes are uniformly Polyester based powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring. The G.I. Pipe to be used of standard make and c-class . All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of COMBINATION EXCERSING BAR of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size with the COMBINATION of Leg press & EXCERSING BAR as per standard given by the manufacturer. The center frame of the COMBINATION EXCERSING BAR is fabricated with main post of 114mm and “c” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using. Handles are made up of 25NB G.I. pipes. One pair of handles are attached to main frame in two opposite exercising bars. All pipes are uniformly powder coated up to minimum 80-100 micron thickness to avoid corrosion. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of OVATE STEPPER/ELIPITICAL EXERCISE make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size of OVATE STEPPER as per standard given by the manufacturer fabricated with main post of 80 N.B. and “c” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE/FRP material. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. The fixing charges of equipment shall be paid separately.

Providing and fixing of DUMBLE CHEST PRESS of make ARIHANT/LEO /LAND SCAPE/ KOMPAN. Design, Shaped and size of DUMBLE CHEST PRESS as per standard given by the manufacturer. main post of 50 N. B. and ”c” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Seat and base plate cover to be made from virgin LLPDE/FRP material. Complete item provided with minimum 50 kg rubberized fix type immovable dumble plates. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of DUMBLE SHOULDER PULL DOWN of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size DUMBLE SHOULDER PULL DOWN as per standard given by the manufacturer. with main post of 50 N.B. and “c” class GI pipe G.I. Pipe as per IS-1239 Handrest of the pipe 40mm dia and “c” class GI pipe G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Complete item provided with minimum 50 kg rubberized fix type immovable dumble plates. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE/ FRP material caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of DUMBLE ROWING of make ARIHANT/ LEO /LANDSCAPE/ KOMPAN. Design, Shaped and size of DUMBLE ROWING as per standard given by the manufacturer with main post of 50 N.B. dia and “c” class GI pipe and LLDP supporting seat is fixed over 40NB Galvanized bend pipe. This bend pipe is further linked to 80 N. B base pipe & ”c” class GI pipe with help of connecting links. Connecting links are made up of 25NB G.I. pipes with specially designed metal bush at ends. The paired 25NB pipe handle with rubber grip at the end is fixed over one of the connecting link. The rolling frame is made by 40 NB & 20 NB G.I. pipes. Complete item provided with minimum 50 kg rubberized fix type immovable dumble plates. Connecting links are hinged in between seat frame and base frame with specially designed bush bearings. A suitable PVC/ rubber grip is provided for foot rest on seat frame. All pipes are uniformly Polyester based powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring. The G.I. Pipe to be used of standard make and c-class . All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and Installation of DUMBLE LATT PULL DOWN of make ARIHANT/LEO/LAND SCAPE/ KOMPAN. Design, Shaped and size DUMBLE LATT PULL DOWN as per standard given by the manufacturer. with main post of 50 N.B. and “c” class GI pipe G.I. Pipe as per IS-1239 Handrest of the pipe 40mm dia and “c” class GI pipe G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Complete item provided with minimum 50 kg rubberized fix type immovable dumble plates. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE/ FRP material caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The fixing charges of equipment shall be paid separately.

Providing and fixing of 24 mm thick factory made SBR tiles flooring (Styrene-Butadiene Rubber) in single or two color. Tiles should be highly compressed with best quality binder. SBR tiles pasted on smoothen concrete surface with the help of good quality rubber adhesive. All complete as per the direction of Engineer in charge.

Arihant Industrial Corportion Limited