INSTALLATION OF AIRPORT SURVEILLANCE RADAR ASR WITH MONO PULSE SECONDARY SURVEILLANCE RADAR MSSR AT ICGGAS DAMAN

Amount

SCHEDULE ‘A’ PART-I (BUILDING & STRUCTURE WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( SITE CLEARENCE, DEVELOPMENT AND EXCAVATION ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT/ HARDSTANDING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (FENCING/ COMPOUND WALL/GATE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (RETAINING WALL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (ARBORICULTURE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (LIGHTENING PROTECTION/ AVIATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIV (LIFTS) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XV (REFRIGERATION & AIR CONDITIONING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XVI (FIRE FIGHTING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XVII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S & F Two way bib top/ angle cock 15mm dia. Make – Jaquar model No CQT-23041 or equivalent

S & F Health faucet with flexible pipe (ABS Body) with 01 meter long PVC tube & wall hook Make: Jaquar model No ALD-chr-573 or equivalent

INTERNAL ELECTRIC SUPPLY: S & F LED light fitting 10 Watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED Mirror light 1 x 5W LUMOS ECCO 1 feet all as specified & directed Make:Luker or Equivalent

S & F Vertical triple pole & neutral (VTPN), double door, 6-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP MCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed.

Supply and fix Engage light with Green & Red LED complete all as specified and as directed

M&L for TV socket module metal flushed including flushed Box cover plate Box for 2 way module complete all as specified.

M & L for Telephone jak with module metal flushed box cover plate for 2way module complete all as specified & directed.

Supply and lay coexal cable for TV Cable drawn through conduit complete all as specified.

SEWAGE DISPOSAL: M & L for laying of DWCPE sewage pipes line 150 mm dia bore pipe sftiffness class SN 8 including sealing of joints fittings etc complete with collers complte all as spcified and directed

S & F on site LLDPE septic tank, conventional type including media designed to carry sewage and sludge water including excavating in any type soil, PCC 1:3:6 below foundation. Vent shaft, connection, returning and fillingin trenches/ all around and removing excessive soil at location directed by Engineer-in-charge etc complete for effective depth of 1.5m and overall depth of 4 m, for 25 user complete all as specified and as directed.

M&L for construction of 2.25 mtr dia x 2.50 m effective depth soakage well 25 user capacity excavation in Hard dense soil/ morrum including filling of brick bats not exc 63 mm size and removing excessive soil as directed by Engineer-in-charge etc complete as per drawing.

FENCING/ COMPOUND WALL: S& F PVC coated GI chain link fencing in green colour of GI wire dia 3mm to 4 mm with total dia including PVC coating 4 to 5.5mm dia complete all as specified and as directed by the Engr in charge. Note : The weight of chain link fencing should not be less than 5.60 Kg/Sqm

EXTERNAL ELECTRIC SUPPLY: Supply and fix cable route indicator made of round CI disc embossed HT Cable, of size 20cm dia 6mm thick duly revited with angle of size 50x50x4mm and 60cm long including PCC 1:2:4 B2 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified.

Supply and fix cable route indicator made of round CI disc embossed LT Cable, of size 16cm dia 6mm thick duly revited with angle of size 50x50x4mm and 60cm long including PCC 1:2:4 B2 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified.

Cutting of bituminous road, PCC surface/ floor by using mechanical method or any type carefully without damaging to adjacent area complete all as specified and directed.

S&F PVC cable looping boxes of size 300 mm x 200 mm x 105 mm with TPN aluminium busbar and MCB SP 6 Amp- 01 No, 10 KA breaking capacity, C curve series, factory made with PVC sheet including heavy duty connector for connection of 4 core cable & fixed to pole with suitable size flat iron clamp, nuts & bolts complete all as specified and directed by Engr-in-Charge. Make :Sintex or as approved by GE

Supply and fixing of cable tray made out of galvanised perforated sheet in 14 gauge, 50mm height including accessories like coupler, wall brackets up/down elbows, bend, tees etc., and fixing with FRP saddles in equal distances on wall crossing and making good to the surfaces as per direction.

EXTERNAL WATER SUPPLY: Supply and fix foot valve confirming to IS 4038, 50 mm dia all as specified & directed.

Material and Labour for construction of brick masonary valve chamber 900 x 900 x 900 mm (internal dimensions), 15 cm thick foundation by using PCC 1:4:8 (type D2), brick work in cement mortor 1:6,10 mm thick plaster internally and 15 mm thick externally in CM 1:4 above ground level, 6 mm thick MS sheet cover with hinges, with hold fasts and locking arrangement fixed to angle iron frame made out of 40mmX40mmX6mm complete with two coat of synthetic enamel paint over one coat of red oxide primer on all metal works and two coat of white wash on all plastered surfaces of valve chamber including excavation, earth work in any strata including disposal of surplus soil to a distance of not exc 50 mtr complete all as specified and directed

Supply install test and commissiong of centrifugal pump set , electric driven complete with all accessories suitable for pumping water 125 LPM discharge at 60 m head coupled with suitable size of electric motor AC 3 phase ,50Hz including supply and fixing the items, such as , necessary connection from starter to motor terminal using proper size of copper cable including ,connection of suction pipe from pump to foot valve, delivery pipe connected to the raising mains of the over head rservoir by means of suitable joints painting the suction and delivery pipe with super enamel paint over a coat of primer as per standared code of colour including MS base plate complete complete all as specified and directed.Note : Suction and delivery pipes shall be measured and paid under appropriate items ( main water supply pump for building)

Cutting of road, PCC surface base, PCC flooring, bituminus surface by using of mechanical method or any type carefully without damaging to adjacent surfaces complete all as specified and directed.

ARBORICULTURE: Supply and spreading of good quality agricultural soil free from stones, rubbish like lumps, roots, and other foreign materials to a uniform thickness of 15 cm including watering, spreading mixed with organic manure in the ratio 4:1 and levelling complete all as specified and directed.

M&L for growing hedges in the perimeter in size 30 cm width and 30 cm height with DURANTA or any other approved sampling by GE which gives a dense and thick appearance including cutting and shaping complete all as directed.

M&L for digging upto max 0.50m depth and refilling with good quality garden soil mixed with organic maure of best quality in the ratio 4:1 and planting of ornamental tress like Fox tail palms, Bottle palms (height min 10 ft) or other exotic type trees as approved by GE including watering, shaping etc all as specified and directed.

Supply and planting of lawn with Bermuda grass having adequate developed roots, after providing anti-termite treatment to the filled soil including watering and shaping etc complete all as specified and directed.

AVIATION: Supply and fix LED type double obstruction light for Aviation complete including aluminium alloy cast body galleries to house two aviation red glass dome porcelain lamp holders, MS clamps on the roof complete all as specified

REFRIGERATION & AIR CONDITIONING: Supply and install testing and commissioning of split type air conditioner 2 TR capacity of inverter technology 5 star rating with cordless remote control,single phase,240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height, intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed Note:- AC's to be installed at various heights and locations at G+8 building.

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type, Wall mounted type & designed for input variation between 150 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and suitable for 2 Ton AC

S &F modular Box sheet metal including cover Plate with socket 3 pin, suitable for 25 Amps flush type universal including 25 amp C series MCB protected.

Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition.

S & F Vertical triple pole & neutral (VTPN), double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP MCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed.

Supply and fix water cooler, electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 60 liters per hour with inbuilt UV and RO complete all as specified and directed..

FIRE FIGHTING: M&L for low smoke zero helogen flame retardent fire alarm cable 2 core, 1.5 sqmm copper conductor confirming to BS7629-1,BS6387 & rated for 500 v grade having plaine stranded copper conductor with priming insulation of glass mica fire resistance tape & secondery insulation high performance silicon rubber with electrostatic screen of aluminum fire barrier type LT 53 outer sheath confirming to BS 7655,red in colour drwan through & including concealed steel conduit including laying, fixing,connecting complete all as specified and directed.

Supply & fixing of cast iron Air Release valve with two air outlets,100 dia bore and fixing up in cast iron water supply mains.

Supply & fixing of cast iron Air Release valve with two air outlets,150 dia bore and fixing up in cast iron water supply mains.

Supply and fix Foot Valve conforming to IS 4038, 150 mm dia.

Supply and fix Foot Valve conforming to IS 4038, 80 mm dia.

Supply and Fixing of 140 Lt. PESO approved cylinder assembly

Supply and Fixing of 80 Lt. PESO approved cylinder assembly

Supply and Fxing of Agent - FK 5-1-12 (Fluoro ketone)

Supply and Fxing of Primary cylinder Accessories

(i) Electric cum manual actuator

(ii) 2" Discharge Hose Flexible

(iii) warning sign

Supply and Fxing of Tertiary cylinder Accessories

(i) Pressure operated control head

(ii) 2" discharge hose fexible

(iii) fexible Actuation hose

(iv) Master cylinder Adaptor kit

(v) Elbow connectors

Supply and Fxing of Manifold check valve, 2"

Supply and Fxing of Discharge Nozzle

Supply and Fxing of Cylnder strap for 80/140 Lt cylinder

Supply and Fxing of Manifold discharge pressure switch

Supply and Fxing of cylinder low pressure supervisory switch

Supply installation testing and commissioning of NOVEC piping ,Sch 40MS ; ASTM A106 Gr B ,as per flow calculations for the specific hazard volume.(communication room)

Supply installation testing and commissioning of NOVEC piping ,Sch 40MS ; ASTM A106 Gr B, as per flow calculations for the specific hazard volume.(Substation room)

Supply installation testing and commissioning of Manual Abort station.

Supply installation testing and commissioning of Manual gas release station (Multi action)

Supply installation testing and commissioning of Gas release panel & inbuilt conventional fire detection with monitored power supply and fittings - 2 zone

Supply installation testing and commissioning of conventional smoke detector

Supply installation testing and commissioning of 24Vdc operated signages for "evacuation" and"no entry"inside and outside the protected enclosure, 1no. Each type for every room . Shall be powerd from Gas release panel.

Supply installation testing and commissioning of Electromic sounder.

Supply installation testing and commissioning of Electromic hooter cum flasher.

Fire Extinguisher Dry Chemical powder[ABC] type 5 Kg capacity. Ceasefire 5kg fire extinguisher mono Ammonium phosphate powder 50, stored pressure type, pressure Guage, Gross weight 8 Kg, empty weight 3 KG, can height 449 MM, Diameter 150 MM, discharge time less than 15 secs, controllable discharge mechanism, Range minimum 4 mtrs, applicable on class A,B,C & electrically started fire A rating 13 A, B rating 34B , can construction deep down & CO2 Mig welded, Valve construction : Forging & Machining internal coating of can : Epoxy powder coating external coating of Can : Epoxy polyster powder coating, Sheet metal thickness : 1.80MM, ISI and EN approved, 5 years warranty.

Fire Extinguisher Carbin Dioxide type of 4.5Kg capacity.Ceasefire 4.5kg CO2 Gas typre fire Extinguisher, Trolly mounted, Easy weight management Used Unused Mechanism Squeeze Grip, Gross weight 9.1kg empty weight 14.6kg, Can height 857MM, Diameter 140MM, Discharge timeless than 10secs controllable discharge mechanism Applicable on class B&C fire, B rating 21B, Can Construction : Hot Spinning/ Forging, Valve Construction : Forging & Machining, Internal coating of Can : Not Applicable, External Coating of Can : Spray painting sheet metal thickness 4.5MM, ISI Approved 1 year warranty.

Fire Extinguisher mechanical Foam type trolly mouted of 9 Liters capacity.Ceasefire 9litrs fire Extinguisher AFFF Foam type , External Cartridge type, Pressure Guage Gross weight 14.6 Kg , empty weight 5.6 Kg, Can height 611 MM, Diameter 175 MM, Discharge timeless than 60 Secs controllable discharge mechanism, Minimum 6 Mtrs, Applicable on Class A,B,Can construction deep deawn & CO2 Mig welded Valve Constyruction : Forging & Machining, Internal coating of can : Epoxy powder coating, External coating of can : Epoxy poyster powder coating sheet metal thickness 2.0MM ,1 year warranty.

Fire Extinguisher Clean agent type 4 Kg capacity. Ceasefire 4kg fire extinguisher mono Ammonium phosphate powder 90, stored pressure type, pressure Guage, Gross weight 125 Kg, empty weight 75 KG, can height 1190 MM, Diameter 4000 MM, discharge time less than 50 secs, controllable discharge mechanism, Range minimum 4 mtrs, applicable on class A,B,C & electrically started fire can construction deep down & CO2 Mig welded, Valve construction : Forging & Machining internal coating of can : Epoxy powder coating external coating of Can : Epoxy polyster powder coating, External Coating of can : Epoxy polyster powder coating, sheet metal thickness 5.00 MM 1 years warranty

DG SET: Supplying, installing, testing and commissioning, factory assembled silent Diesel Engine driven generator set, fully wired alternator AC to give an out put of 250 KVA continuously rating at a power factor 0.8 lagging, 3 phase 4 wire, 415 volts 50 Hz supply, 1500RPM, directly coupled with diesel engine liquid cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, control panel & other accessories etc and comprising of following. (A)Diesel Engine: Liquid cooled turbo charged with after cooler to deliver suitable BHP at 1500RPM under NTP conditions of BS 5514 and conforming to IS 10001/ 10002, DIN 6271 & ISO 3046 with an overload capacity of 10% for one hour in any 12 hours continuous operation with the following accessories:. Diesel engine of rated speed at full load electric start developing with system with radiator and including electronic governor control of class A1, engine control panel, lub oil pump, water pump, fuel tank, exhaust pipe with silencer and suitable for electric start with batteries of adequate capacity and suitable for alternator of specified capacity complete with fly wheel direct/flexible coupling and coupling guard complete.

(a) Radiator with blower fan or heat exchanger with guard. (b) Pipe coupling for engine cooling system piping. (c ) Corrosion inhibitor coolant (d) Paper element filters (i) Fuel filter (ii) Lube oil filter (iii) By pass (e) Fly wheel housing and fly wheel to suit alternator. (f) Engine bearing mechanism in fly wheel housing. (g) Shut off coil with safeties for LLOP/HWT/over speed. (h) Dry type air cleaners and vacuum indicators. (j) Residential silencers. (k) Stainless steel exhaust flexible bellows. (l) Motor driven priming pump. (m) Battery charging alternator. (n) Exhaust piping made out of STIC C class, MS pipe inclusive of all accessories and hardware, necessary supports scaffolding as per manufacturer's recommendations to sustain back pressure with rain cap. (o) Mineral wool insulation 2 inch thick suitable for 400 degree Celsius temperature cladded with aluminium sheet o 30 gauge for the entire length of exhaust pipe. (p) First fill of oil, coolant and diesel during commissioning and 12 hours testing. (q) Interconnecting copper cabling of adequate capacity batteries control. (r ) Fuel pipe class STIC 1" /1.5" /2" dia - 01 lot (s) Self starter 12 volts DC. (t) Electric operated electronic governor. (u) Fuel injection pump. (v) No of cylinders - 12 No VEE

(w) Electronic instrument panel, complete with all accessories as per manufacturer's specifications displaying the following:- (i) 12vx2 nos -24V Battery. (ii) Water temperature. (iii) lubricating oil pressure. (iv) Engine speed -1500Rpm (v) Engine hours (vi) Frequency. (vii) Voltage. (w) Safety control (Trip and indication). (i) High water temperature (ii) Low lube oil temperature (iii) Overspeed stop (x) Base frame: Sturdy, fabricated welded construction, channel iron base frame (duly painted) for mounting engine and alternator as per manufacturer's design alonwith AVM pads. (y) Battery:-24 volts(2x12v Battery) DC, 180AH, maintenance free battery conforming to IS:14257 with leads & terminals (Make- Excide/Amron). (z) Fuel tank: 12 hrs. full load diesel storage capacity fuel tank with mounting brackets factory made of 5mm thick HR/MS sheet with level indicator fuel inlet, fuel outlet, air vent, drain plug, in let arrangement for diesel filling fro exterior canopy (without opening its panel) etc complete all as specified and directed. (aa) Isolator panel with 250 amp MCCB (ab) Auto logic panel for automatic stat

(B) Alternator: Alternator suitable rated for 250 KVA, 0.8 pf , 415 volts, 3 phase, 4 wire, 50 Hz at 1500 RPM, self excited and self regulated with AVR brushless, screen protected, drip proof , insulation class-H, IP -23, voltage regulation grade - VG 3 self ventilated and conforming to BS: 5000 / IS: 4722 suitable for engine as mentioned here-in before, conformig to IS: 13364(part-1) Make: KOEL GREEN / stampford/ crompten/ kirloskar/ Greaves (C) Acoustic Enclosure:- M & L for acoustic enclosure for the above 250 KVA DG set to reduce noise level to 75 dB measured at 1.0 meter distance for audible frequencies as per guide of Central Pollution Control Board and manufacturer's specification and comprising of following from authorised GOEMs of Gen Set manufacturer's specified :- (i) Sound insulation : 100mm thick Rock wool (Density 64 Kg/Cum). (ii) Outer body : 1.6mm thick CRCA (iii) Door : 1.6mm thick CRCA (iv) Base frame : ISMC 300 (v) Inside illumination : 1 No.- 1 x 18 watt LED fitting of make Phillips/ Bajaj/ Crompton. (D) AMF Control panel:- Factory fabricated cubicle type, free standing, floor mounted, indoor type, IP-43, AMF control panel, provided with removable rear panels & hinged front panel for easy accessibility, fabricated out of not less than 2.0mm thick CRCA sheet including two coats of powder coated paint over a coat of red oxide primer etc and comprising of following: (i) AMF control circuit with 4 pole MCCB 400 Amps - 2 nos, with ultimate breaking capacity Icu-50 KA at 415 volts and microprocessor release conforming to IEC 60947 Part-I with breaking capacity Ics=Icu at 415 volts , thermal overload setting 70% to 100%, short circuit setting 5 to 10 times-02 Nos. for main supply & DG set supply with HRC back up fuse complete with all DC control relays/ Line voltage monitor (LVM) as per OEM specifications incorporating motorised stored energy operating Engine start, stop, three attempt starting facility and failure to start etc.

(E) Digital load manager : Three phase 4 wire indicating V,I,PF, KVA, KW, F of Enercon make with serial communication port model No.EM6400 with class 1.0 accuracy meter or equivalent make suitable rating of CT per phase- one No. (iii) Indication lamp R, Y, B with 3 Nos. of 2A HRC fuses-10 sets. (iv) Bottom gland plate for incoming and outgoing cables. (v) Circuit diagram plate. Note :- DG set should be suitable as per CPCB -4 latest norm wef 01 July 2023 of National Clean Air programme (NACP) Act 1981.

S&F of Aluminum composite panels of Al strong make for external wall cladding at all levels with all necessary Aluminum member frame works at all heights and elevation fixed on to the supporting brick masonry/ RCC frame, fastening material and hardware complete with all labour, material, equipment, handling, transportation, workmanship, preparation of shop drawings, staging, scaffolding, etc, all complete. Work is to be executed as per approved shop drawings and Instructions of the Engineer-in-Charge. The aluminum composite panel should consist of 3mm thick thermoplastic core of antioxidant LOPE sandwiched between 2 skins of 0.5mm thick aluminum alloy sheet making a total panel thickness of 4mm. The surface shall be finished with PVDF based coating of minimum 30 micron on the topsides and services coating on the reverse side shall be with polymer paint. The surface shall be protected with self-adhesive peel off masking foil. The system shall be designed to withstand a wind pressure of 150kg/Sqm and shall be fixed to the Masonry/RC frame with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded aluminum section shall be anodized in approved color with anodic coating of minimum 20 microns. Extruded section shall be 6063 T5 or T6 alloy conforming to ASTM B221. Any other festering straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS304 grade Including providing open cell polyethylene backer rods, weather sealant etc. The weather sealant shall be Dow Corning 688/795 or equivalent. All the work shall be as per Manufacturer's specifications and approved shop drawings.

Supply and fix PVC horizontal venetian blinds consisting of alum head rail , vanes/ louvers 2"/ 4" wide of approved tint and traverse cord incl all necessary fittings complete fixed in position all as per specified and as sirected.

S&F 50mm thick stainless steel letters exc 30cm with proportionate english letters including fixing and all accessories. Note: The fixing of Stainless steel letter shall required to be carried out any height of the building. The rate quoted shall be deemed to be inclusive of erecting & removing staging and other safety measures as per site requirement and as directed.

Phase-II: Daily maintenance of garden features (trees, shrubs, hedges/edges, lawn, seasonal flower etc) like hoeing, de-weeding, pruning, watering, mowing of lawn, upkeep and maint of potted plants, loading/unloading of carriages, removal of garden rubbish etc and spraying of insecticides, pesticides, organic fertilizers etc complete all as specifeid and directed. NOTE: (i) Comprehensive maintenance of arboriculture items shall be of 36 months after successful completion of Phase-I work. The rates quoted by Contractor shall deemed to be inclusive of required manpower and material like manure, pestisides, garden soil.. etc for maintenace of arboriculture items. (ii) If any plant, lawn/ grass is damaged/ died during this currency same shall be replaced by contractor of the same species, variety and size as specified above.

M/s. P S REDDY (BID ID -3366452)

Hariom Projects Pvt Ltd (BID ID -3365897)

MUKESH CONSTRUCTION CO (BID ID -3366086)

A2Z ENGINEERS AND PILE FOUNDATIONS (BID ID -3366242)

vijay infraprojects pvt ltd (BID ID -3364987)

S.N. Constructions (BID ID -3366637)

D R STEEL CONSTRUCTION COMPANY PRIVATE LIMITED (BID ID -3366351)