RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Surf Board - Outdoor Gym Equipment ( 2 pieces ) Technical Specifications * As per GeM Category Specification 1/6 Specification Specification Name Values Bid Requirement (Allowed Values) TYPE Type Double Double SIZE/DIMENSIONS Length 950 * Width 700 * Height 1300 * CAPACITY Maximum User Weight ( Kg ) 120 120.0 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1161:2014
Requiredlatest BIS specification No IS 1161:2014
Requiredlatest All the GI Pipes are ISI marked Yes Yes Main Central Pipe 150mm Nominal Bore G.I. Pipe 150mm Nominal Bore G.I. Pipe Main Frame Pipe
RequiredClass as per IS 1239 Heavy Heavy Main Central Pipe ( As per Clause 3
Requiredof IS 1161 ) Nominal Bore & Wall Thickness 150 mm NB
Required165.1 mm OD & 4.5 mm Thickness 150 mm NB
Required165.1 mm OD & 4.5 mm Thickness Grade Material as per table 2 of IS 1161 Not Applicable Not Applicable Movement (Paddle) Frame 40mm Nominal Bore G.I. Pipe 40mm Nominal Bore G.I. Pipe Movement ( Paddle ) Frame Pipe
RequiredClass as per IS 1239 Heavy Heavy Movement ( Paddle ) Frame Pipe ( As per as per Clause 3
Requiredof IS 1161 )
RequiredNominal Bore & Wall Thickness 40 mm NB with 2.9 mm Thickness 40 mm NB with 2.9 mm Thickness Grade Material as per table 2 IS 1161 Not Applicable Not Applicable Connecting Links 32 mm Nominal Bore G.I. Pipe 32 mm Nominal Bore G.I. Pipe Connecting Links Pipe
RequiredClass as per IS 1239 Heavy Heavy Connecting Link Pipe ( As per Clause 3
Requiredof IS 1161 ) Nominal Wall & Thickness 40 mm NB with 2.9 mm Thickness 40 mm NB with 2.9 mm Thickness 2/6 Grade Material (as per table 2 of IS 1161 ) Not Applicable Not Applicable Handle Frame 32mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe Handle Frame Pipe
RequiredClass as per IS 1239 Heavy Heavy Handle Frame Pipe ( as per IS 1161 ) as per clause 3
RequiredNominal Wall & Thickness 25 mm NB with 2.6 mm Thickness 25 mm NB with 2.6 mm Thickness Grade Material per table 2 of IS 1161 Not Applicable Not Applicable Foundation Pipes with anchoring 500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm 500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 150mm 150mm Foundation Pipe
RequiredClass as per IS 1239 Heavy Heavy Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3
RequiredNominal Wall & Thickness 125 mm NB with 4.5 mm Thickness 125 mm NB with 4.5 mm Thickness Grade Material (as per table 2 of IS 1161) Not Applicable Not Applicable M S Foundation Plate Thickness 12 12.0 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. * Movement must be supplied with bearings Yes * Bearings Ball Bearing Ball Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes * Nuts and Bolts for Assembly G.I. * Foot Rest Fibre Reinforced Plastic Fibre Reinforced Plastic Closing Caps of open ends of the pipes
Requiredbearings
Requiredbushes and G I Caps * 3/6 base Thickness of closing caps ( min ) 3 * All Plastic Components U V stabilised
Requiredweather resistance * COLOUR Colour As per buyer's requirements * Paint/Finish Powder Coated
RequiredUV resistant * Paint Coating Thickness ( min ) 80 * OTHER REQUIREMENTS Other Requirement Ergronomic Design
RequiredEquipment shall be free from entrapments and sharp edges
RequiredInstallation Instructions must be provided * Installation Included Included Safety and quality Requirements European Standard EN 16630: 2015 latest * Instruction Plate Stainless Steel
RequiredSize 150 X 230 X 0.7mm
Requiredwith indelible printing * CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630 Registration No and Validity of Registration - * APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation
Requiredif desired by buyer Yes * WARRANTY Warranty ( years ) 2 2.0 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
