CPPP

Active

Works

Construction Works

Tender for Construction of Store and Washroom

Centre for Development of Telematics

South Delhi, Delhi | New Delhi, Delhi

Amount: Refer DocsCloses: 15 Oct 2026

Timeline

Published1 Oct 2026
Pre-Bid Meeting6 Oct 2026
Closes15 Oct 2026
Bid Opening16 Oct 2026

Tender Value

Refer Docs

EMD Value

₹36,000

Closing Date

15 Oct 2026, 12:00 pm

Tender Inviting Organisation

Name

MANAGER PURCHASE

Address

CDOT CAMPUS, ADMIN Block, MANDI ROAD, MEHRAULI, NEW DELHI

Work Description

Tender for Construction of Store and Washroom Near Support Canteen Along with Civil, Interior and Electrical Work at C-DOT Campus, New Delhi

Tender Information

Tender ID

2026_CDOT_928473_1

Reference Number

C-DOT/CAMPUS/2025-26/72/03

Tender Type

Open Tender

Product Category

Construction Works

Form of Contract

Percentage

Period of Work

90 days

Location

NEW DELHI

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender document

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredTender doc signed and stamped, POA, PAN, TIN, PF, ESI and GST certificates (.pdf)

RequiredValid Income Tax clearance certificates for the last 03 FYs-2022-23, 2023-24, 2024-25 (.pdf)

RequiredCopy of experience certificates showing work done in the last 03 FYs-2022-23, 2023-24, 2024-25 (.pdf)

RequiredAnnexures-3,4,5,6,7,,8,9,10,11,12 on org. letterhead duly signed and stamped by competent authority (.pdf)

RequiredCopies of audited balance sheets of last 03 FYs-2022-23, 2023-24, 2024-25 (.pdf)

RequiredMSME Certificate, if applicable (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹36,000

EMD Fee Exemption Allowed

Yes

Pre-Bid Meeting

Meeting Place

NEW DELHI

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

1 Oct 2026

Download Ends

15 Oct 2026

Submission Starts

1 Oct 2026

Clarification Period

1 Oct 2026 - 5 Oct 2026

Pre-Bid Meeting

6 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (53 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1CIVIL WORK
1.01	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil	15.63	cum	177.5	₹2,774.33
1.02	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	12.57	cum	8,583.4	₹1,07,893.34
1.03	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	2.69	cum	6,518.6	₹17,535.03
1.04	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)	10.85	cum	7,370.65	₹79,971.55
1.05	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)	27.83	cum	9,344.35	₹2,60,053.26
1.06	Providing and fixing 30mm thick shutters, second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)	7.2	sqm	3,747.3	₹26,980.56
1.07	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	250	kg	133.7	₹33,425
1.08	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes	607.53	kg	194.4	₹1,18,103.83
1.09	Providing and fixing Ridges plain (500 - 600mm) precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :	18	metre	532.35	₹9,582.3

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.18 MB

Work Item Documents

BOQ_975747.xls

BOQ • 0.32 MB

Tenderdocs.pdf

Tender Documents • 1.14 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1CIVIL WORK
1.01	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil	15.63	cum	177.5	₹2,774.33
1.02	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	12.57	cum	8,583.4	₹1,07,893.34
1.03	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	2.69	cum	6,518.6	₹17,535.03
1.04	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)	10.85	cum	7,370.65	₹79,971.55
1.05	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)	27.83	cum	9,344.35	₹2,60,053.26
1.06	Providing and fixing 30mm thick shutters, second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)	7.2	sqm	3,747.3	₹26,980.56
1.07	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	250	kg	133.7	₹33,425
1.08	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes	607.53	kg	194.4	₹1,18,103.83
1.09	Providing and fixing Ridges plain (500 - 600mm) precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :	18	metre	532.35	₹9,582.3

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1CIVIL WORK

1.01

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

15.63

cum

177.5

₹2,774.33

1.02

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

12.57

cum

8,583.4

₹1,07,893.34

1.03

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

2.69

cum

6,518.6

₹17,535.03

1.04

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

10.85

cum

7,370.65

₹79,971.55

1.05

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

27.83

cum

9,344.35

₹2,60,053.26

1.06

Providing and fixing 30mm thick shutters, second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)

7.2

sqm

3,747.3

₹26,980.56

1.07

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

250

133.7

₹33,425

1.08

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

607.53

194.4

₹1,18,103.83

1.09

Providing and fixing Ridges plain (500 - 600mm) precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

metre

532.35

₹9,582.3