Construction of Haj House Building at OTA Nanganallur Metro Station in Chennai city (B plus G plus 4 floor) under Phase I

Amount

E0003) Earth work excavation in Soft disintegrated rock (including refilling) E0003.a)0 to 2 mt.

E0003.b) 2 to 3 mt.

E0005) Earth work excavation for Open foundation (Excluding refilling) E0005.a) 0 to 2 mt.

E0005.b) 2 to 3 mt.

E0007) Earth work excavation in SDR for Open foundation (excluding refilling) E0007.c) 3 to 4 mt.

E0007.d) 4 to 5 mt.

E0007.e) 5 to 6 mt.

RE0006) Providing Anti-termite treatment to soil

F0040) Supplying and filling in foundation and basement with crushed stone sand in layers of 150 mm thickness

F0016) Supply and filling in foundation and basement with Stonedust in layers of 150mm thickness

FL0115) Supplying and laying of Rubber moulded hydraulic pressed Paver blocks following thick FL0115.b) 83mm thick Paver block

CSMP0002) Plain cement concrete 1:5:10 for Foundation & Basement

CSMP0003) Plain cement concrete 1:2:4 for Foundation & Basement and other similar works

CS0008) Providing precast concrete slab for cupboard ward robes shelves using standardised concrete mix M30 CS0008.I) 20mm thick CS0008.I.a) In Ground floor

CS0009) Providing precast concrete slab for cupboard ward robes shelves using standardised concrete mix M30 CS0009.II) 40mm thick CS0009.II.a) In Foundation & basement

C0042) Providing and laying in position, Standardised Concrete Mix M-30 Grade C0042.a.I) Below G.L up to 4.5m

C0042.a.II) Depth up to 9m

C0042.a) In Foundation and basement

C0042.b) In Ground Floor

C0042.c) In First Floor

C0042.d) In Second Floor

C0042.e) In Third floor

C0042.f) In Fourth floor

C0042.g) In Fifth floor

C0015) Providing Rain water harvesting pit by augering 300mm dia bore pits C0015.a) Providing pit

C0015.b) Augering 30cm dia

SA0069) Construction of Inspection chamber with brick jelly cement concrete 1:8:16 SA0069.a) 60cm x 60 cm x 60cm

SA0069.b) 60cm x 60 cm x 75cm

BMP0001) Brick work in C.M. 1:5 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") BMP0001.a.I) 1.50m depth and upto 4.50m depth below GL

BMP0001.a II) In Foundation and basement

BMP0002) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") BMP0002.b) In Ground Floor/Stilt floor

BMP0002.c) In First Floor

BMP0002.d) In Second Floor

BMP0002.e) In Third Floor

BMP0002.f) In Fourth Floor

BMP0002.g) In Fifth floor

BMP0003) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm thick (B.P.) BMP0003.b) In Ground Floor/stilt floor

BMP0003.c) In First Floor

BMP0003.d) In Second Floor

BMP0003.e) In Third Floor

BMP0003.f) In Fourth Floor

BMP0003.g) In Fifth floor

BMP0004) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) BMP0004.a) In Foundation and basement

BMP0004.b) In Ground Floor

BMP0004.c) In First Floor

BMP0004.d) In Second Floor

BMP0004.e) In Third Floor

BMP0004.f) In Fourth Floor

FL0024) Ellispattern Flooring (No Sand)

FL0025) Weathering course

FLMP0004) Finishing top of roof with one course of Pressed Tiles

FLMP0005) Supplying and fixing of Colour glazed tiles, C.M 1:2, 10mm tk

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid

FL0123) Providing double nosing to the edges of granite slab of 20mm thick

FLMP0013.a) Supplying and fixing of Jet black Granite Tile tile in C.M 1:2, 10mm thick for wall cladding.

FLMP0009.b) Supplying and fixing of double charged Vitrified Tiles of size (600x600x8mm) C.M 1:3, 20mm thick for flooring

FLMP0017.a) Supplying and laying of Jet black varieties Granite slabs (super fine polished with machine cut edges) of size 4'-0"x 2'-0" of 18 to 20 mm thick for flooring

FL0155) Retaining wall/ UG tank wall (outside) Waterproofing with SBS Membrane - Providing and laying water proofing treatment to the Retaining wall

FL0156) Underground structures waterproofing with HDPE membrane - Providing and laying water proofing treatment

FW0004) Formwork using M.S.Sheet FW0004.a) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

FW0004.b) Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

FW0004.c) For Square and rectangular columns and small quantities

FW0004.d) Vertical wall

FL0008) Providing additional Strutting to centering of R.C.C slab and beams of all surfaces or any other form works

FW0018) Shoring, and strutting with sheet piles of size width 400 mm x height of 3m x thickness of 9mm as per IS 2314-1986 FW0018 b) 0 to 4m

PLMP0001) Plastering in C.M. 1:5, 12 mm thick

PLMP0002) Plastering in C.M. 1:4, 12 mm thick

PLMP0003) Spl. Ceiling plastering in C.M. 1:3, 10 mm thick

PLMP0004) Plastering with CM 1:3, 12mm thick with WPC

PLMP0005) Plastering in CM 1:5, 12 mm thick for border finish in all floors PLMP0005.a) 150 mm wide

PLMP0005.b) 75 mm wide

PLMP0005.c) 50 mm wide

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting - New "wood work"

PA0026) Painting - New "iron work"

PA0032) Supplying and applying of Full putty one coat

PA0037) Painting the false ceilling / New walls with two coats of 1st class ready mixed plastic emulsion paint

PA0042) Painting the new walls with two coats of approved best Exterior Emulsion paint

PA0044) Varnishing the new wood work with two coats of best melamine polish/varnish

J0001) Teak wood Wrought & Put up J0001.a) T.W. over 2 m & below 3 m

J0001.b) T.W. below 2 m length.

J0021) Supply and fixing of Magnetic door catches

J0029) M.S.Holdfast

JD0064) Supplying and fixing of PVC Sliding Door with Roller

JV0022) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

JW0042) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

JD0095) Supply & Fixing of Qute/equivalent WPC Decora Door set where the Door shall be extruded as a single core door with size 75mm x 50mm.

JD0022) Supplying and fixing of Best Indian Teakwood Panelled door shutters Double leaf JD0022.c) 1500 X 2100 mm with Brass fittings (Double leaf)

JD0050) Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989 JD0050.b) door size 1000 mm x 2100mm (Single Leaf)

GR0001) M.s Grills

RE0009) Anticorrosive treatment for window grills

GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase

GR0057) Supplying & fixing of Stainless steel Hand Rails for Staircase

GR0072) Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make GR0072.a) Manually Operated (up to 8 sqm. Area)

RE0012) Supplying, fabricating and placingof Mild Steel Grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors

CS0012) Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works CS0012.I) 20mm thick CS0012.I.a I)Basement floor

CS0012.I.a) Ground floor

CS0012.I.b) In First floor

CS0012.I.c) In Second floor

CS0012.I.d) In Third floor

CS0012.I.e) In Fourth floor

CS0015) Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works CS0015.a) In Ground floor

CS0015.b) In First floor

CS0015.c) In Second floor

CS0015.d) In Third floor

CS0015.e) In Fourth floor

CS0033) Supplying and fixing of Jet Black Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4'x2' and above 18mm to 20mm thick for Kitchen arrangements C.M 1:3 CS0033 a) In Ground floor

JD0099) Providing Cup-board Shutter with frame using termite /water proof plywood of 19mm thick

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

MS0050) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0004) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) WS0004.d) 2000 litres

MS0053) Supplying and fixing of C.I. manhole cover with locking arrangements of approved quality and brand of following size (50 kg) MS0053.b) 60 x 60cm (Heavy duty)

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 WS0006.a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

WS0006.b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

WS0015) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40, Fully concealed in walls WS0015.a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary GI specials

WS0258) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary starts mud circulation method 150 mm dia of clay and sand or sand stone shale pebbles boulders WS0258.a) Drilling of borewell in upto 60m ending below ground level

WS0258.b) From 60m to 90m

WS0200) Reaming from 140 / 150 mm dia pilot bore to 300 mm dia bore WS200.a) Upto 60 m depth ending below ground level

WS0200.b) From 60 m depth and upto 90 m depth

WS0261) Supply and erection of following dia of PVC casing pipes (6Kg/cm2) as per IS 12818/2010 of approved quality for bore wells WS0261.a) 150mm dia of PVC casing pipes (6Kg/cm2) (shallow depth)

WS0149) Supply and delivery of 150mm dia of Ribbed screen PVC casing pipes (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality

WS0150) Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole WS0150.a) 150mm dia casing pipes assembly

WS0207) Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality with ISI mark

WS0191) Charges for developing the bore well with air compressor of 300 CFM capacity (Minimun 8 Hours)

WS0279) Supply and Delivery of Submersible motor Pumpset (Open well) with ISI mark IS 8034 without Panel Board of following capacity head of electric motor pump set with accessories for open well etc. WS0279 BJ) 350LPM X 40m

WS0266) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation upto 5 HP

EL0346) Supply and laying of PVC insulated and sheathed follwing core and sq.mm flat type copper cable EL0346.d) 3 core 6 sq.mm flat type copper cable

EL0347) Labour charge for laying of following PVC insulated and sheathed flat type copper cable (For laying below GL including earth work ) EL0347 b) 3 core 6 sqmm

WS0160) Labour charges for the erection of submersible pumpset in Borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth

WS0222) Supply and delivery of 5 HP clear water vertical wet type (Three Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board WS0222 AJ) Duty: 100LPM X 125m

WS0176) Supplying, laying and jointing the following dia HDPE Pipe 10kg/cm2 of best approved quality with ISI mark suitable for Submersible pump in borewell class 5 WS0176.a) 32 mm dia HDPE Pipe

WS0023) Supplying, delivery and laying of following dia UPVC pipe schedule 80 of approved ISI quality Below Ground level WS0023.b) 40mm dia

WS0025) Supplying, laying and jointing the following dia of UPVC Pipes with ISI mark of best approved quality (above ground level) WS0025.a) 32 mm dia UPVC pipes schedule 80 with required UPVC specials

WS0023.b) 40 mm dia UPVC pipes schedule 80 with required UPVC specials

WS0023.c) 50 mm dia UPVC pipes schedule 80 with required UPVC specials

WS0018.XIII) Supplying and delivery of following dia MS clamp sets as per IS 1239/part II for erection of submersible pumpset in wells WS0018.XIII.b) 40mm dia M S clamp set

WS0235) Supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell

WS0195) Supplying and fixing of following dia UPVC ball valve with one side compression end and other side female end as per ISO WS0195.a) 32mm dia Ball Valve (UPVC)

WS0180) Supply, Installation ,Testing and Commissioning of following sizes of Non Return valve of wafer type (Dual Plate check valve conforming to IS and with 5 years warranty WS0180.b) 150mm dia Non Return valve

WS0018.IX) Supplying and fixing of following dia Gun Metal Specials as per IS Specifications WS0018.IX.c) 32 mm dia Gate Valve (Heavy duty)

SA0002) Supplying and fixing of porcelin Wash hand basin (white without pedastal) superior variety of size 550x400mm with all accessories

SAMP0001) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

SAMP0004) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

SA0025) Supplying and fixing of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

SA0014) Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm

SA0034) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark SA0034.a) 110 mm dia.

SA0034.b) 75 mm dia.

SA0035) Supplying, Laying and Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 SA0048.a) 110 mm UPVC Non Pressure pipe

SA0048.b) 160 mm UPVC Non Pressure pipe

SA0048.c) 200 mm UPVC Non Pressure pipe

SA0139) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings SA0139.a) CP Shower Arm with Overhead Shower Rose

SA0139.b) CP two way bib cock with health faucet

SA0139.c) CP Angle cock tap

SA0139.d) CP Wall Mixture Tap 3 in 1 system with Hand Showers

MS0024) Supply and fixing of Porcelain Soap Dish (colour) of size 150mm x 150mm x 50mm of approved make (ISI) and quality

MS0025) Supplying and fixing of following size of SS Towel rack of best quality MS0025.a) 600mm long with Lower Hanger

FL0097) Supplying and fixing of Jet black Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4'x2' and above 18mm to 20mm thick in all floors for urinal partition

SA0141) Supply and fixing of Stainless Steel Health faucet approved quality with ISI mark with required specials

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement SA0070. b) 600mm x 600mm

SA0114) Supply, delivery and fixing of Stainless steel sink following size using 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling SA0114 b) 600mm x 600mm x 200mm thick

SA0114 c) 1200mm x 550mm x 180mm thick

MS0003) Supplying and fixing of aluminium towel rails of 75cm long

MS0017) Supply & Fixing of Bevelled edge mirror of approved quality and brand of size 600 x 450 x 5.5mm shelf type mounted in the PVC / Fibre Glass framed with necessary hard board backing

MS0026) Supply & Fixing of Special Type mirror of approved quality and brand of size 1000 x 780 x 5.5mm shelf type mounted in the PVC / Fibre Glass framed with necessary hard board backing

EQ0041 b) Hire charges for dewatering pump with engine cost including transportation charges,fuel charges and labour charges

L0001) Supply and planting of avenue trees

L0004) Supplying and fixing of triangular shape chicken mesh tree guard

EL0008) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable (Modular Switches) EL0008 a) Light point with ceiling rose

EL0008 b) Light point without ceiling rose

EL0008 c) Calling bell point with Buzzer/Calling bell

EL0016) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

EL0024)Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

EL0032) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

EL0040) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

EL0043) Supplying and fixing of 16 amps modular switch 1 w- 1 Module with 6/16 amp sockets- 3 Module on a suitable MS box of 150x100x75mm thick

EL0214) Earthing Station IS3043 (Type I)

EL0074) Box type Fibre Fan hook

EL0075) Charges for fixing of "Fan"

EL0077) Supply and delivery of following Electric Ceiling fan with ISI mark EL0077.a) 48" Electric fan 1200mm sweep

EL0084) Supplying and fixing of 300 mm dia sweep AC exhaust fan of approved ISI quality

EL0079) Supply, delivery and fixing of Wall mounting fan of Sweeps 400 millimeters, Speed (RPM) 1300,Air Delivery (cu mtr/min) 60, Power Input (W) 50 Plastic Body and Blades

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety EL0070.a) 9 watts LED bulb

EL0047) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED with guard

EL0111) Supply and fixing of following LED street light fitting with LED (Higher end) with 32mm/40mm dia. GI pipe (class B) with 1 no.32mm/40 mm dia GI bend EL0111 a) 120W LED

EL0190) Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0196) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0206) Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0211) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

EL0252) Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0153) Supply and fixing of 24W LED 4000K 2 x 2 Square type Recessed fitting with LED (Higher end)

EL0427) Supply and fixing of 18W 3000K LED Round type Recessed fitting with LED (Higher end) on false Ceiling

EL0339) Supplying and laying of following PVC armoured LTUG cable (below Ground) EL0339.m) 3.5 core 185 sq.mm.

EL0339.n) 3.5 core 240 sq.mm.

EL0339.o) 3.5 core 300 sq.mm.

EL0340) Supplying and clamping of PVC armoured LTUG cable on post or wall and ceiling (Above GL) EL0340.f) 3.5 core 25 sq.mm.

EL0340.h) 3.5 core 50 sq.mm.

EL0340.j) 3.5 core 95 sq.mm.

EL0340.k) 3.5 core 120 sq.mm.

EL0343) Supply and fixing of brass cable gland for following PVC armoured LTUG cable with earth connection EL0343.f) 3.5 core x 25 sq.mm. PVC LTUG armoured cable

EL0343.h) 3.5 core 50 sq.mm.

EL0343.j) 3.5 core 95 sq.mm.

EL0343.k) 3.5 core 120 sq.mm.

EL0343.m) 3.5 core 185 sq.mm.

EL0343.n) 3.5 core 240 sq.mm.

EL0343.o) 3.5 core 300 sq.mm.

EL0344) Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable EL0344.f) 3.5 C x 25 sqmm

EL0344.h) 3.5 core 50 sq.mm.

EL0344.j) 3.5 core 95 sq.mm.

EL0344.k) 3.5 core 120 sq.mm.

EL0344.m) 3.5 core 185 sq.mm.

EL0344.n) 3.5 core 240 sq.mm.

EL0344.o) 3.5 core 300 sq.mm.

EL0489) Supplying and fixing of 3 PHASE UPS (Three Phase In & Single Phase Out) System with Battery of 10 KVA 1 hour back-up

Sub Main Panel : EL0370) Supply and erection of 400 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber

Sub Main Panel :I EL0383) Supply and erection of 250 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber made

Sub Lighting Panel :I EL0384) Supply and erection of 125 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber

AC Panel-I EL0381) Supply and erection of 250 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar chamber

EL0328) Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with Metal Door Cover with IP42 Protection (Higher end)

EL0447) Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover IP 42 protection

EL0299) Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door Metal Door Cover with IP42 Protection (Higher End)

EL0464) Supply and fixing of triple pole and neutral 4 way TPN 7 segment MCB DB with metal /acrylic door cover with IP 42 protection. (Higher end)

EL0465) Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover with IP 42 protection (with ELCB) on wall.

EL0246) Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/ supports on wall / floor / ground for earth connection

EL0249) Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metre

EL0220) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification

EL0467) Supplying and fixing of Cable Tray using 16SWG GI Hot Dip / Powder Coated Cable tray from wall EL0467 a) 150mm width and 50mm heigh

EL0467 b) 300mm width and 50mm height

EL0160) Supply and fixing of GI steel Tubular Pole for street light of 7 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm)

EL0111) Supply and fixing of following LED street light fitting with LED (Higher end) with 32mm/40mm dia. GI pipe (class B) with 1 no.32mm/40 mm dia GI bend EL0111 b) 150W LED

EL0126) Supplying and fixing of Synthetic Moulded Compound Box for switch or socket mounting for street light of approved make

EL0339) Supply and laying of following PVC armoured Copper LTUG cable in a trench to be excavated at a depth of 0.75 metre EL0339 b)2 x 10 sq.mm

EL0442) Supply and fixing of 1000W automaticel ectric water heater of 25 litres capacity suitable for 230V 50c/s AC

NL0002) Supplying. Fabricating and erection of M.S Scheme Name board

FC0032) Supplying, fabricating, erecting and fixing Calcium Silicate Board 10mm thick (Plain sheet) false ceiling

LF0017) Providing for passanger Lift (10 Person capacity) without machine room (Basement to G.F)

LF0011) Providing for passanger Lift (10 Person capacity) without machine room (B+G+4FL)

G0011) Supply, installation, testing and commissioning of 250 KVA Diesel Generator set complete with all accessories below with AMF Panel

G0005) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for commissioning the DG set

G0002) Supply and delivery of the following safety equipments with allied materials as required by the statutory authority like CEIG G0002 a) 2m x1m Rubber mat suitable for 11KV installation confirming to IS

G0002 b) Shock Treatment Chart fixed in glass frame

FF0035) Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm FF0035 a) 150mm dia

FF0035 b) 100mm dia

FF0035 c) 80mm dia

FF0035 d) 50mm dia

FF0035 e) 25mm dia

FF0036) Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water FF0036 a) 150mm dia

FF0036 b) 100mm dia

FF0036 c) 80mm dia

FF0062) Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes FF0062 b) 150mm dia

FF0062 c) 100mm dia

FF0104) Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc

FF0105)Supply, erection, testing and commissioning of cast iron body and gun metal or stainless steel Internal Non-Return Valve of size of 80mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor

FF0106)Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point

FF0107) Supply, errection, testing and commissioning of Fire Fighting Electrical Control Panel of 15 HP, 415 V, 50 Hz Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof

FF0108)Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring to the Terrace Pump Motor

FF0109)Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve

FF0110)Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901

FF0111) Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points

FF0112) Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red.Near every hydrant point

FF0113) Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel

FF0114) Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure

FF0115) Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser

FF0116) Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type

FF0117) Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area.

FF0118) Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling.

FF0057) Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge

FF0119) Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete

FF0097) Supply and installation of Fire buckets of 9 ltrs capacity. Stand made of MS Channel and angle to accommodate 4 No of buckets filled with cleaned soft sand.

FF0120) Supply and installation of Addressable Fire Alarm Control Panel consists of display board

FF0121) Supply and installation of Addressable Detectors with base with Binary coded address setting. Dual LED’s for 360° visibility

CCTV CC0061) Supply, Installation,Testing Commissioning of IP Based CCTV System comprising of following CC0061 a) 5MP IP Bullet / Dome Camera with SD card Support.

CC0061 b) 40-Ch IP NVR Input, resolution up to 12MP, Dual RJ45 port, 4SATA (up to 10TB), 1 HDMI&VGA, 2USB, RAID

CC0062) Supply, Installation, Testing & Commissioning of 55 Inch full HD for CCTV setup. Make : TCL/ Redmi/ LG/ ACER/equivalent)

CC0063) Supply and Installation of FXS - 16 Port for IP Extension for HYBRID IP EPABX SYSTEM & Telephone

CC0064) Supply and Laying of CAT 6 unarmoured Lan cable for Data point

CC0065) Supply and Laying of Fiber Single Mode Cables 12 Core Armoured

CC0066) Supply and Laying of 25mm PVC (RIGID) Pipes (1.8MM thick) with ISI conduit pipe Heavy with Accessories

CC0067) Supply and Installation of Hume pipe of 300mm dia with required bends and other accessories

LAN & WAN NW0074) Supply of Ceiling mount 3000 Mbps speed WIFI Access point with accessories

NW0074 a) Installation charges for ceiling mount access point with accessories

NW0075) Suppy of RJ 45 information outlet.,

NW0076) Supply of single face plate of I/O.

NW0077) Supply of Backbox for Face plate.,

NW0077 a) Installation charges for I/O with face palte and backbox

NW0077 b) Supply and Installation of 1 Mtr Patch cord etc.,

NW0077 c) Suppy of 16 Port 10/100/1000 unmanaged switch etc.,

NW0077 d) Installation Charges for 16 Port 10/100/1000 unmanaged switch

NW0078) Supply of 9U rack with accessories for switch.,

NW0078 a) Installation Charges for 9U rack with accessories for switch.

NW0078 b) Supply of Cat 6-A, LAN UTP Cable for Data points etc.,

NW0078 c) Laying of Cat 6-A, LAN UTP Cable for Data points etc.,

NW0078 d) Supply & Laying of 25mm PVC conduit for Data points etc.,

PA0042) Supply of EPABX (Electronic private automatic branch exchange)- upto 144 Extension system, 4 Trunk with 2 digital , etc.

PA0042 a) Testing and Commissioning charges for Epabx (Electronic private automatic branch exchange) system and configuration as required by department officers.

PA0043) Supply of 24 key telephone keypad, Ringer volume control, Tone/pulse switchable, redial, flash, PA etc

PA0043 a) Supply of Caller ID Phone, Key Pad , Ringer Volume Control, Tone / Pulse Switchable, Redial, Flash, Pause, Mute

PA0043 b) Supply of Basic Phone, Key Pad , Ringer Volume Control,

PA0044) Supply of 50 Pair Crone Box made of MS Powder coated with modules to fix interconnection of telephone cables and accessories

PA0044 a) Supply of Information Outlet socket single made of aproved make (ISI) ,with Back box & Face Plate, etc.

PA0044 b) Installation charges for fixing Information Outlet socket single etc

PA0044 c) Supply of 2 pair pvc 0.5mm unarmoured Telephone Cable with all accessories

PA0044 d) Laying of 2 pair pvc 0.5mm unarmoured Telephone Cable with all accessories

PA0044 e) Supply of 100 pair pvc 0.5mm unarmoured Telephone Cable with all accessories

PA0044 f) Laying of 100 pair pvc 0.5mm unarmoured Telephone Cable with all accessories

PA0044 g) Numbering, Feruling and marking of I/O box for telephone cables.

PA0044 h) Termination, Intergration, cable dressing, checking connectivity, allignment etc. charges for telephone system, crone box side, patch crimping, patch cord fixing etc.

35KLD Sewage Treatment Plant SA0193) Supply and installation SS Bar screen, type of screen-Medium, Size: 0.75mx 0.75 m, 15 mm Spacing, SS 304

SA0193 a) Supply and Installation of Fine Membrane diffuser, Size: 90MM dia x 0.5 M Long with retrievable system, MOC: EPDM with inter connecting air hose pipe lines and fitting

SA0193 b) Supply and Installation of Coarse Membrane diffuser, Size: 76MM dia x 0.75 M Long with retrievable system , MOC: PVC with inter connecting air CPVC pipe lines and fitting

SA0193 c) Supply & Installation of STP - Collection water transfer Submersible Cutter pump with Motor, Type-Cutter, discharge size : 40NB, Head: 10 Meter, Flow: 2.5 Kl/hr, Electrical panel: 0.37 KW / 0.5HP / 3 Phase, Make: CRI/ Texmo/ Equivalent

SA0193 d) Supply and Fixing of Air blower, Capacity-40 M3/hr, Pressure-0.4 Kg/cm2, Make : KAY /Akash / Equivalent., Rotary twin lube compressor comprising Common base frame, Suction filter, Suction

SA0193 e) Supply & Installation of Blower Motor, Electrical - RPM 1500, 2 HP, 3Phase with Control panel Make Kirloskar / Equivalent

SA0193 f) Supply and Installation Packaged Sewage Treatment plant with all internal accessories Size: 4 m x 2.0 m x 2.5m, MOC: MS- FRP

SA0193 g) Supply of MBBR Media for aeration tank, MOC: PP

SA0193 h) Supply and Fixing of Pressure Sand Filter (PSF), Size: 400 MM dia x 1500 MM Height on straight (HOS) x 6 MM Thick, 40 NB Side Mounted Multi Port Valve, with different size Filter, Medias – 400 Kgs

SA0193 i) Supply and Fixing of Activated carbon Filter (ACF), Size: 400 MM dia x 1500 MM Height on straight (HOS) x 6 MM Thick, 40 NB Side Mounted Multi Port Valve

SA0193 j) Supply & Installation of Chlorine dosing pump, Capacity- 4 LPH @ 4 Kg/cm2, Type: Electronic Metering pump with Suction & Delivery NRV assembly and 5/8” dia PP Hose-10 Meter, with control panel, Make: E dose/ Equivalent

SA0193 k) Supply & Installation of STP - Sludge recirculation Pump with Motor, Type Monoblock non clog, discharge size: 40 NB, Head: 25 Meter, Flow : 1.5 Kl/hr, Electrical: 0.37 KW / 0.5 HP / 3 Phase, NRV, Control valve with complete accessories Make: Kirloskar /Equivalent Warranty: one year

SA0193 l) Supply & Installation of STP – Filter Feed water pump with Motor, Type-Monoblock non clog, discharge size: 40 NB, Head: 35 Meter, Flow : 4 Kl/hr, Electrical : 0.75 KW / 1 HP / 3 Phase, NRV, with complete accessories Make: Kirloskar/Equivalent

SA0193 m) Supply and Installation of UPVC / CPVC Interconnecting 40 NB pipes works, including NRV, Valves for all Service line pipes and fittings

SA0193 n) Supplying and delivery of electrical control panel board for the STP all pumps, No. of Feeder-11

SA0193 o) supplying and Installation of electrical cables and pipes for the STP all pumps

SA0193 p) Labour and Plumbing work for all electro Mechanical equipment’s installation & commissioning work

SA0193 q)Supply of STP - Bio Culture

SA0193 r)Providing Sodium Hypo chloride – 60 Kgs /month, Bio Culture -5 Kgs /Month, Gear oil -1 Lits/Month, Grease -1 Kg /Month and Pipe lines, fittings & Air blower belt etc.

SA0193s) Annual Maintenance of Sewage Treatment plant of 35KLD capacity 24 hours per day by engaging qualified plant Operators in shift basics i.e., 3 Person for 3 shift, (Total-3 Nos) for operating all Electro Mechanical equipment’s

JD0024) Supplying and fixing of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer

GRM CONSTRUCTIONS (BID ID -1520050)

S S Natarajan & Co (BID ID -1521022)

Sri Balaji Constructions (BID ID -1521578)

P GANGADARAN (BID ID -1516917)

SRP CONSTRUCTION COMPANY (BID ID -1521653)

EEE PEE S AND CO (BID ID -1520714)

M Bojarajan (BID ID -1521806)

Bidder Name

SRI RAMANA BUILDING CONSTRUCTIONS PRIVATE LIMITED

Sri Balaji Constructions

P GANGADARAN

SRP CONSTRUCTION COMPANY

EEE PEE S AND CO

M Bojarajan

GRM CONSTRUCTIONS

S S Natarajan & Co