Laying of Underground Pipeline of Main Riser pipe from RD 7620 to 8687 off-taking from RD 111450/L of Narwana Branch.

Earth work Excavation for pipe line in trenches and pits in open area where disposal of surplus earth is done alongwith alignment, including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering of refill in 15cm layers and Restoration of unmetalled or unpaved surface to its original condition excluding cost of shoring and timbering but including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing etc.

Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Providing of ISI Marked D.I. Pipe (S&S) as per IS 8329 including all cartage, cost of rubber ring.D.I. Pipe as per IS 8329 DI-K7 750mm i/d pipe lines complete in all respect

Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring.D.I. Pipe as per IS 8329 DI-K7 750mm i/d pipe lines laid complete in all respect

Ordinary Kilometer Stone for Plan Roads Reinforced cement concrete M-15 grade ordinary kilometer stone of standard design as per IRC 8- 1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications

200 meter Stone Reinforced cement concrete M-15 grade 200 meter stone of standard design as per IRC 26- 1967 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications

Dismantling metalling or dry brick ballast

Granular Sub-Base (Table 400-1) Construction of granular sub-base by providing material as per grading-III ( Table 400-I of MORT&H 5th revision), mixing in a mechanical mix plant at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications

Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-inCharge

Providing and laying factory made rubber moulded smooth finish cement conc. Kerb M-20 grade 250mm high with bottom woidth 165mm and top width 115mm made over strong vibratory table and fixinf with cement morter 1:2

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Plain cement concrete M-15 Grade in sub-structure complete as per drawing and Technical Specifications Height upto 5m.

Supplying, fitting and placing HYSD bar reinforcement in sub- structure complete as per drawing and Technical Specifications.

Providing & fixing 500mm dia pipe

Providing & fixing of 450 Mm Dia Pipe

Wrught iron & Mild steel ladders, framed grills , gratings etc with ends of bars incl. cost of bolts, nuts screws, welding rods complete in position

Construction of embankments with Earth obtained from road way cutting or excavation incl. compaction in 20 cm layers and dressing

Applying priming coat with metal primer on new steel or iron work incl prepration of surface

Painting 2 or more coats with synethetic enemal paints in all shades on mettalic surfaces