Civil Work

Amount

Distemper/ Exterior paint work in colony, computer and administrative building situated at SLDC Complex, BBMB, Chandigarh.

Scraping: (a) White wash and colour wash. Pb-CSR- Ref. no.- 8.31(a)-L/R.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. Pb-CSR- Ref. no.- 16.65-T/R.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface. Pb-CSR- Ref. no.- 16.11-T/R.

White washing (two or more coat). Pb-CSR- Ref. no.- 16.2-T/R.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Pb-CSR- Ref. no.- 16.17-T/R.

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. Pb-CSR- Ref. no.- 11.3(i)-T/R.

Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge. (i) mixing by manual means. Pb-CSR- Ref. no.- 10.8(b)(i)-T/R.

Cement concrete 1:2:4 (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR- Ref. no.- 10.13(a)(i)-T/R.

20mm thick cement plaster 1:5 in two coat work. Pb-CSR- Ref. no.- 15.21-T/R.

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c) Tees angles & channels. Pb-CSR- Ref. no.- 18.1(c)-T/R.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (a) 0.50 mm (+ 0.05 %) thick. Pb-CSR- Ref. no.- 13.27(ii)(a)-T/R.

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm. Pb-CSR- Ref. no.- 16.59-T/R- upto 4m.

Extra rates for white washing, distempering, painting and decorative cement based paints etc for superstructure Where any single storey height exceeding 4 mtr in height for every additional height of 2 mtr or part thereof (External or Internal). Pb-CSR- Ref. no.- 16.72-T/R- for 4-6m.

Extra rates for white washing, distempering, painting and decorative cement based paints etc for superstructure Where any single storey height exceeding 4 mtr in height for every additional height of 2 mtr or part thereof (External or Internal). Pb-CSR- Ref. no.- 16.72-T/R- for 6-8m.

Extra rates for white washing, distempering, painting and decorative cement based paints etc for superstructure Where any single storey height exceeding 4 mtr in height for every additional height of 2 mtr or part thereof (External or Internal). Pb-CSR- Ref. no.- 16.72-T/R - 8-10m.

R&R work of shed for DG set situated at 66 KV S/S, BBMB, Chandigarh.

20mm thick cement plaster 1:5 in two coat work. Pb-CSR- Ref. no.- 15.21-T/R.

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c) Tees angles & channels. Pb-CSR- Ref. no.- 18.1(c)-T/R.

Cement concrete 1:2:4 (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR- Ref. no.- 10.13(a)(i)-T/R.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (a) 0.50 mm (+ 0.05 %) thick. Pb-CSR- Ref. no.- 13.27(ii)(a)-T/R.

RELIABLE ENGINEERS

Bharat Sahni Contractor

Rajinder Kumar