GE/U(N)-61/2020-21 REPAIRS TO FLOORING INTERNAL PLASTERING INTERNAL WATER SUPPLY ETC OF 250 TRANSIT CAMP HQ 71 SUB AREA PROVOST UNIT R CENTRE UP AND DOWN CONVEY GROUND AND 112 TA BN H COY UNDER AGE B/R-I OF GE (N) UDHAMPUR

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as speceified and directed by Engr in Charge

Rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement and with using Water proofing compound .(Water proofing compound shall be measured and paid sepratly )complete all as speceified and directed by Engr in Charge

Rendering 10 mm thick in cement mortor 1:6 on fair face on brick/concrete surfaces and finished even and smooth without using extra cement all as directed.

Rendering 5 mm thick in cement mortor 1:3 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall complete all as speceified and directed by Engr in Charge

Two coats of oil bound distember over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed.

Three coat of white wash over coat of primer of newly plastered surfaces ceiling complete all as specified.

Dismantling loose/disintegrated portion of RCC chajjas, bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrisove paint on exposed surfaced and provision of necessary support form work and including 10mm thick plastering in CM 1:4 finished fair and even completed all as specifed. Note :- The rates includes for necessary formwork, scafolding, material & labour etc required up to height of 10 meter.

Dismantling water tanks of 500 ltrs and removing to store, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)

1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer white in colour (inside outside) hoisted and fixed in position incl inlet, outlet and overflow connection nipple of suitable size all as specified

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)

Ball brass valve 15 mm dia high pressure with polythene float and fly nut complete all as specified and directed.

Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed.

In repair Ball brass valve 15 mm dia high pressure with polythene float and fly nut complete all as specified and directed.

In repairs Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed.

Disconnection of existing tanks, setting side for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge.

Description all as per Srl item No.above here in before but of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word' ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge.

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipescomplete all as speceified and directed by Engr in Charge

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes complete all as speceified and directed by Engr in Charge

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 40 mm bore pipes complete all as speceified and directed by Engr in Charge

15 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speceified and directed by Engr in Charge

ditto as above but except pipe complete all as speceified and directed by Engr in Charge

20 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speceified and directed by Engr in Charge

ditto as above but except pipe

40 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speceified and directed by Engr in Charge

ditto as above but except pipe

In repair 40 mm Gun metal , global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as speceified and directed by Engr in Charge

In repair 20 mm Gun metal , global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as speceified and directed by Engr in Charge

Cutting chases in Stone concrete block or slab, walls , pinning in , making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing steps, cills, sunshed, shelves, lintels, etc ; and cutting chease for water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth.

In repair 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as speceified and directed by Engr in Charge

Dismantling of PVC rain water pipe of any size any description all as specified.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as speceified and directed by Engr in Charge

75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as speceified and directed by Engr in Charge

PVC nahani trap with grating to 75mm bore including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 all as specified

Ditto as above but 110 mm bore

S&F PVC (SWR) bends 75 mm bore any radius with oveal & acces door complete all as speceified and directed by Engr in Charge

PVC (SWR) floor trap plain with grating incl. jointing with solvent cement (75 mm bore) complete all as speceified and directed by Engr in Charge

PVC (SWR) junction single, (Single T/Y jn with Access door)75mm equal or unequal complete all as speceified and directed by Engr in Charge

Ditto as above but 110 mm T/Y Jn with Access door complete all as speceified and directed by Engr in Charge

In repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete incl trap set in and provision of lime concrete filling in sunken portion complete all as specified and directed.

In repair of 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.Fixed in repairs complete all as speceified and directed by Engr in Charge

In repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.Make-CERA cat part No. 2080(Camelia), Jaquar –CNS-WHT-WH 10 or equivalent of any approved make as approved by GE.

In repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' 150x150 mm incl CI cover complete all as specified.

In repairJet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed. Make : Jaquar, Cera or equivalent as approved by GE

PTMT Bib cock fancy (cobra)capstan head handle screwed down high pressure, including wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

PTMT soap dish /oval fixed in reapir complete all as speceified and directed by Engr in Charge

PTMT 15 mm size concealed Angle valve/stop valve , with capstan head handle screwed down high pressure, including wall flanges; screwed for 15mm bore pipe connection fixed complete all as specified and directed.

PTMT towel rail 24" (600mm) fixed in repair complete all as speceified and directed by Engr in Charge.

In repair urinal mangnum half stall type including Cp brass spreader built in all as specified & directed and approved make including ceramic partition

Looking mirror 5 mm thick edge rounded fixed with clips all as specified including teaK Wood frame of size 50X50 mm decorative water proof including malamine polishing fixed in repair,complete all as speceified and directed by Engr in Charge.

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed

Taking down shutters of any descp exc 1 sqm but n.exc 2 sqm complete all as speceified and directed by Engr in Charge

Dismantling of PVC partical board partition in any size and description complete all as speceified and directed by Engr in Charge

Half brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as speceified and directed by Engr in Charge

Reinforced cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed.

Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs,beams landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as speceified and directed by Engr in Charge

TMT bars 8 mm dia over cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirmation to TMT bars complete all as specified.

Cutting holes in brick walls built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc hail but n.exc one brick complete all as speceified and directed by Engr in Charge

Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face complete all as speceified and directed by Engr in Charge

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as speceified and directed by Engr in Charge

250 mmAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as speceified and directed by Engr in Charge

150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as speceified and directed by Engr in Charge

150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as speceified and directed by Engr in Charge

100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as speceified and directed by Engr in Charge

Factory made pressed steel frame steel window/ vent with glazed & gauged shutter (combined with side hung shutters incl box type inges, steel handle, necessary locking arrangement, peg stay complete with one shop coat of zinc chrome primer including PCC (1:3:6) type -0 filling in back side recess profile portion, complete all as specified and directed by Engineer In Charge. Note : Rate quoted are included for wire gauged and glazed window complete & shall be measurred as overall out to out one side only.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to Fe 290 or Gde-E-165, complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimed surfaces, complete all as specified and as directed by Engr-in-Charge.

3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as speceified and directed by Engr in Charge

75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base to receive floor rough finishes complete all as specified.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm screed bed in 1:3 cement mortar complete all as speceified and directed by Engr in Charge

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm screed bed 1:4 cement mortar complete all as speceified and directed by Engr in Charge

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as speceified and directed by Engr in Charge

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet thickness to be checked should be 0.50 or 0.45 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws minimum 03 Nos screws over each sheet. complete all as specified. .

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles all as specified.

Roof trusses (framed) , trussed , purline, cross gantries and fastening and heavy brakets framing (Beam, tee, angle,channel or flat section ) including distance piecescomplete all as speceified and directed by Engr in Charge

Preparation of new surface of any description, not otherwise described, over 10 cm width or girth applying two coat of synthetic enamel paint over one coat of primer any shade as approved all as directed and specified.

Preparation of old steel surface of any description, not otherwise described, over 10 cm width or girth applying two coat of Aluminioum paint and over coat of aluminium red oxide priming with any shade as approved all as directed and specified.

25 mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded aggregate) as in roof padding / leveling coarse kerbs, or chamfered on edges finished even and smooth with using extra cement and water proofing compound.complete all as speceified and directed by Engr in Charge ( Water proofing compound shall be measured and paid sepratly )

RUDRABHISHEK CONSTRUCTIONS

M/S PARDEEP KUMAR

MADAN LAL SHARMA AND SONS

M/S JANDIAL ENTERPRISES