Development of civil and Electrical charging infrastructure for operation of Electric buses in State of (HP) at Workshop Chambaghat, Distt. Solan H.P

Demolishing cement concrete manually/ by mechanical means including disposal of material upto approved dumping site. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within all leads ( Dismantled usefull steel material like angles, tees, flats and channels including all gusset plates, bolts, nuts, may be handed over to the Deptt.), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Extra for marking of structural steel work required to be re-erected, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm (Thirty centimeter) in depth, 1.5 m (One point five meter) in width as well as 10 sqm ( Ten square meter) on plan) including getting out and disposal of excavated earth upto approved dumping site, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundations, trenches etc, in earth work in all kind of soil, such as pick work, jump work, blasting work, by blasting or chiseling and pumping bailing, dewatering where ever required etc, complete and lift up to all heights and than clear from the edge of the excavation and than returning the stacked soil in 15 cm. (Fifteen centimeter) layer into the plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated earth up to dumping site, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (One Cement isto Four coarse sand isto Eight graded stone aggregate ) 40 mm (Forty milimeter) nominal size , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (One Cement isto Three coarse sand isto Six graded stone aggregate) 20 mm (Twenty milimeter) nominal size including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and laying in position specified grade of reinforced cement concrete Mechnically Mixed and vibrated, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :- 1:1.5:3 (One Cement isto One and half coarse sand isto Three graded stone aggregate) 20 mm (Twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (One cement isto Six coarse sand) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Centering and shuttering including strutting, propping etc. and removal of form for :- Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Centering and shuttering including strutting, propping etc., including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.