Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹35.7 L+₹4.5 L (14.3%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹45.1 L
EMD Value
₹90,200
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_596050_1
8400-970/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,200
Yes
12 Jul 2023
17 May 2023
20 Jun 2023
17 May 2023
19 Jun 2023
31 May 2023
Amount
Complete removal of existing treatment by means of mechanical scrubber and manually on the surfaces where the machine can not reach and preparing the area with external wall care putty to a uniform smooth surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. on external surface of height up to 7.50M all as directed by Engineer-in-charge. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Complete removal of existing treatment by means of mechanical scrubber and manually on the surfaces where the machine can not reach and preparing the area with external wall care putty to a uniform smooth surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. on external surface of height exc. 7.50m but n. exc 15m all as directed by Engineer-in-charge (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Complete removal of existing treatment by means of mechanical scrubber and manually on the surfaces where the machine can not reach and preparing the area with external wall care putty to a uniform smooth surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. on external surface of height exc. 15.0m but n. exc 18m all as directed by Engineer-in-charge (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified and as directed height up to 7.50m complete all as specified and directed.
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement (including as in patches also) height up to 7.50m complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key, scrubbing down with water height exc 7.50m but n.exc15.0m etc complete all as specified and as directed
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement (including as in patches also) heightexc 7.50m but n.exc 15m complete all as specified and as directed
Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key, scrubbing down with water height exc. 15.0m but n.exc18.0m etc complete all as specified and as directed
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement (including as in patches also) heightexc 15.0m but n.exc 18.0m etc complete all as specified and as directed
M&L for rendering 10 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement etc complete height exc 15.0m but n.exc18m) etc complete all as specified and as directed
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in Sub base or base course finished even annd fair complete all as specified and directed.
M&L for 50 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring and finishing smooth & even with using extra cement complete all as specified and directed.
S&F glass dividing strips, 3mm thick and 38mm wide and inserted in position to confirm to design complete all as specified and directed.
M&L for hardcore of broken gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for cutting shrubs wild growth/trees exc 5cm but n.exc 30cm girth and removing complete vegetation growth from walls, Chajja/roof projection/plinthprotection, Water supply/plumbing lines including taking out roots from RCC/brick work and making good the disturbed surface with PCC 1:2:4 type B0/CM 1:3 using with WPC and poaring chemical in the root removed area , disposing off the rubbish from the site from single/ two storey bldgs, if the growth occures contractor is resposible to remove any nos of times during the currency of CA complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for grouting cement concrete by injecting cement slurry with pressure grouting machine making holes in the concrete at 1.0m centre to centre to a depth n. less than 50 to 65mm in walls/slab of water tank including necessary staging/scaffloding etc, inserting PVC flexible pipe in drilled holes dia of pipe 10 to 12mm to full depth and seal the pipe with CM (1:1) complete all as directed by Engineer-in-Charge
M&L for removing of cavities roughening the smooth surface scrapping out/removing corrosion all loose/scale/rust etc. from the visible reinforcement by applying rust remover @ 200 ml per Sqm or as per manufacturer's instruction , rust removal and cleaning the steel reinforcement properly and then applying 40 micron thick dry thickness coat of epoxy zinc rich primer @ 250 ml per Sqm or as per manufacturer's instructions of exposed and new steel reinforcement (measured flat) complete all as specified and as directed up to height of 15m .
Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for PCC 1:1.5:3 type A0 (using 12.50mm graded stone aggregate) mixed with fosroc chemicals as per manufacturer instructions and applying the mix over peeled of cleaned concrete surface of columns, beams and slab, chajja etc including necessary form work complete all as specified and as directed
M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks, hand rail and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and directed.
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
M&L for preparation of new painted steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed to over head FRP tank staging height up to 7.50m complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over coat of Red oxide primer complete all as specified and directed to over head FRP tank staging height up to 7.50m complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed to over head FRP tank staging height up to 7.50m complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed to over head FRP tank staging height exc 7.50m and n.exc 15.0m complete all as specified and directed.
M&L for rendering 10 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement etc complete height exc 7.50m but n.exc15.0m) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Dismantaling plain or corrugated,semicorugated sheet in roof covering complete all as spcified and directed
M&L for pre-painted galvalume aluminum zinc coating GI @150 GSM based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as spcified and directed
M&L for pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as spcified and directed
S&F 40mm thick clean sawan Boarding, with nails in any situation paqlned on one side (except flooring and skirting) complete all as spcified and directed
M&L for two coats of synthetic enamel painting on new wooden surfaces over a coat of pink primer including preparation complete all as spcified and directed
M&L for one coat of synthetic enamel paint onold wooden surfaces including preparation complete all as spcified and directed
UNITED BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .