REPAIR / MAINT OF B/R AND E/M WORKS AT QAE (MET) O.F. KATNI

Amount

Taking up or down 15mm steel tubing and connections of following dia, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm steel tubing and connections of following dia, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15mm Tubes, ‘medium grade’ galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F 20mm Tubes, ‘medium grade’ galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Refixing old steel tubing of 20mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles including removal of debris to a distance n.exc 100m as directed by Engr-in-Charge.

M & L for Brick work with subclass 'B' brick straight or curved on plan exc 6m mean radious built in CM (1:6) as directed .

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15mm thick on brick masonry surfaces or surface other than fair face of brickwork in CM (1:4) all as specified and directed.

M&L Rendering 15mm thick on brick masonry surfaces on fair face of brickwork in CM (1:6) all as specified and directed.

M&l Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface all as specified and directed.

All as per item No. 11 here in above but one coat on old surface of wall including preparation all as specified and directed

M&L applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface all as specified and directed.

All as per item No. 13 here in above but one coat on old surface of wall including preparation all as specified and directed

M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in copping, filling gaps between roof sheeting and wall etc. including necessary form work and finishing of concrete surfaces complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) including removal of debris to a distance n.exc 100m as directed by Engr-in-Charge

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM 1:4 to receivtiles all as specified and directed.

M&L 15mm thick screed bed or bedding layer of mortar 15mm thick of laying floor finishes in CM 1:6 all as specified and directed.

M&L non skid jointless Ceramic colour tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.11sqm but nexc 0.18sqm in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frames) not exc 1.5 Sqm

Taking down chowkhat with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4.00 Sqm each

Taking down shutters exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed

M&L second class hard wood plain solid straight chowkats and frames wrought , framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specified and directed.

S&F mild steel flat iron as in holdfast including screwing or welding conforming to Fe 290 Gde E 165 all as specified

S&F 100MM Butt hinges, medium weight, cold rolled mild steel and fixed in repair all as specified and directed.

S&F Aluminium 100MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 all as specified and directed.

S&F 200mm aluminium anodised of extruded section barrel tower bolts all as specified and directed.

S&F 150mm Extruded aluminium alloy towerbolt, fabricated type., anodised all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type., anodised all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed (Make : CLASSIC or equivalent ISI marked)

M&L for repair to Collapsible steel gates with necessary fittings and make it functinable complete all as specified and directed incl one coat of synthetic enamel paint all as directed

M&L preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth applying one coats of Synthetic enamel paint all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth applying one coats of Synthetic enamel paint all as specified and directed.

M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl provn of lime concrete bedding all as specified and directed.

S&F in repairs Towel rail brass chromium plated 20mm dia 600 mm long complete all as specified and directed.

S&F in repair 15 mm dia angle valve chromium plated cast coper alloy fancy type screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete

S&F in repair 15 mm bore cp stop valves, fancy type . Cast copper alloy with crutch or butter fly handle, screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and directed

S&F in repair 15 mm bore bib taps , fancy type . Cast copper alloy with crutch or butter fly handle, screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and directed

S&F 15mm bore CP pillar tap fancy type, cast copper alloy with capstan head screwed down high pressure with or without lttered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed

S&F in repair PVC vaveless, syphonic action type 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repair PVC connection 15mm size with nuts of length 600mm

S&F in repair health faucets specifiecations all as specified and directed (Make Jaguar, series- allied or equivalent of parryware)

S&F PVC Waste pipe 32mm/40mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgs/sq.cm complete

S&F in repair Vitreous china squatting ‘Pan’ Orissa pattern 580 x 440mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe, anti syphonage pipe etc including trap set in and including concrete and making good to floor complete all as specified

S&F in repair Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, grating and union for discharge pipe complete.

Supply and fixed in repair Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as specified.

Demolition and braking of drain pipes AC /CI/PVC set in cement mortar or adhensive all as directed 75mm to 110 mm dia

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls as directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls as directed.

S&F 110mm PVC (SWR) junction (single T) equal & unequal complete

M&L for PVC(SWR) bends of dia 110mm

M&L for PVC(SWR) bends of dia 75mm

S&F 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by Engr-in-Charge

Material and labour for point wiring (concealed) including rigid non-metallic PVC heavy conduit, 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with moudular flush type metal boxes and modular cover plate suitable for fixing modular switches, sockets and fan regulator etc., including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point /fan/ bell/ buzzer controlled by one modular switch, 1 way 6 amps, 1 module. Note:-(i) Conduit and accessories included in the item rate quoted.(ii) Cost of steel terminal box with modular cover plate included in the item rate quoted.

All as per item No. 63 here in before but with One 3 pin 5 Amp socket outlet on the same board .

All as per item No. 63 here in before but with One 3 pin 5 Amp socket outlet on independent board

All as per item No. 63 here in before but with 4 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S & F modular type socket out let 5 pin 5/6 amps.

S & F modular type switch socket 2 in 1, 5 & 15 Amps flush type

S & F Ceiling rose two to three terminalPVC/polycarbonate, isolated body.

S & F Modular switch type 230/250 Volts, 06 Amps, Single Pole, one way, complete all as specified and directed by Engr-in-Charge.

S & F in repairs LED 12 Watt, 230 Volts, surface mounted downlighter fitting, 110 Lumin per Watt, decorative type, complete with all accessaries and proper connection from fitting to existing point and making the surface smooth all as per requirement and directed by Engr in Charge .

S & F in repairs LED 12 Watt, 230 Volts recessed mounted downlighter fitting, 110 Lumin per Watt, decorative type, complete with all accessaries and proper connection from fitting to existing point and making the surface smooth all as per requirement and directed by Engr in Charge .

S & F in repairs LED tube light fitting 20 watts, 2000-2200 luminaire with Poly carbonate LED 20 Watt / 2100 Lumin tube rod with inbuilt driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and with two Nos MS bracket on wall with complete hanging arrangment complete, necessary fixing arrangement complete all as directed.

Supply and fix in repairs surface mounted 10 watts LED tube light fittings, mirror lighting with lamp and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm complete all as directed. Make:- Wipro/ CG / Philips.

S& F in repairs MCCB TPN 63 Amp,4Pole,16 KA, 415 Volt

S & F in repairs MCB SPN of 240 volts up to 32 Amps capacity, 'C' series.

S & F in repairs MCB SP of 240 volts 6 to 32 Amps Capacity, 'C' series.

Supply and fix in repairs LED Street light of 45 Watt, 100 Lumin per Watt, Total Lumin 4600 including fixing material (clamp, nut, bolt, GI pipe etc) completed all as as directed.

S&F in repairs PVC conduit for existing point wiring/submain wiring ISI mark of 19/20 mm dia.including all accessoris required all as directed.

Carrying out repair to existing window type / split type air conditione/Water cooler of any capacity including taking out, reinstalling after repairing, cleaning, servicing, oiling in moveable parts and charging of refrigrent gas if required including testing, comissioning and quarterly servicing of each unit and in between period as an when required machanic will visit for minor repair such as electric connections, replacement of small size of wire, cleaning of filter and complete till completion of work all as specified and as directed. Note:- i) Cost of refrigrent gas and necessary spair parts shall be measured and paid separately.

Supply and fix in repairs of serviceable sealed unit compressor suitable for window type/ split type air conditioner/water cooler/refrigerator of required capacity, cutting of suction and discharge copper tubes including breezing, jointing, testing and commissioning complete all as directed. Make : Godrej / Kirloskar / Techumsha / Carrier. Note:- Cost of refrigrent gas shall be paid under relavent item.

Supply and fix in repairs 4 Pole MCCB 400 to 630 Amp, 50 Hz ,415 V with rupturing capacity 50 KA.

Taking down ceiling fans/ exhaust fan / wall bracket fan of any sweep and make from any position carefully including disconnection of electric supply and deassembling of blades from fan and deposit in MES store for carrying out necessary repair/rewinding i.e overhauling, painting etc complete all as specified and directed.

Carrying out repairs and checking of Ceiling/Exhaust fans of any size/type/make, checking the serviceability of safety pins, clamps, down rods, rubber bushes, nuts, bolts, canopies and electric connections etc. reconnecting/hanging in original position, reconnecting the electric cables and testing complete, all as directed. (Note : Items required to be replaced, over hauling & rewinding of fan motor if required will be measured and paid separately)

Dismantling of ceiling fan 1200 mm sweep/Exhaust fan and removing the burnt winding and material and labour for rewinding the same with supper enamelled copper wire of existing size, gauge and turns including cleaning the slots properly, and testing complete.

Material and labour for one coat of synthetic enamel paint by spray machine for ceiling fans/Exhaust fan any size / any make including filling cavities with filler one coat after cleaning all dust etc and marking MES Nos with black paint all as specified and directed.

Supply and fixing in replacement of condenser ISI marked 2.5/3.15/4.0 mfd complete all as specified and directed.

Supply and fixing in replacement of ball bearing of size 6201/6202 complete all as specified and directed.

Supply and Fixing in repairs clamps with rubber bush, safety pins, nuts and bolts suitable for ceiling fan.

Supply and fixing in repairs fan regulator stepped type suitable for ceiling fans.

Taking down and disconnecting existing voltage stabilizer upto 5KVA and strip opening up, single phase automatic buck and boost type with input voltage not less then 130 volts to 280 volts and output voltage 230 volts, plus or minus 2.5% replacement of unserviceable parts re-assembling complete all as directed.

Re-winding power transformer of stabilizer of capacity 1 KVA to 5 KVA with super enamelled copper winding of same gauge and turns as per existing including all insulating material such as latherite paper, glass sleeves, paper insulation if required, varnishing, drying and testing complete all as directed.

Dismantling blower motor of air conditioner/water cooler/refrigerator of any capacity, removing the burnt coil, rewinding of motor with super enamelled copper wire of sutable size and gauge including replacement of bearing of blower motor, cleaning properly the slots, baking of winding, greaseing of bearing etc and refixing, testing complete all as directed.

Supply and fix in repairs starting capacitor/Running capacitor/Relay any capacity, suitable for Window / Splite type AC / Water Cooler / Refrigerator of any type, any capacity and any make including taking down old complete all as directed.

Supply and fix in repairs thermostate any capacity suitable for Window / Splite type AC / Water Cooler /Refrigerator of any type, any capacity and any make including taking down old complete all as directed.

Supply and fix in repairs fan blade suitable for window / split type air conditioner/Water cooler including taking down old fan blade complete all directed.

Supply and charge gas R-22/R-134 in Air Conditioning any type including rectify the gas leakage, testing and commisioning complete all as directed.

Supply and fix in repairs blower motor of any capacity, single phase, suitable for Window / Split air conditioner/Water cooler of any capacity, including testing complete all as directed.

Supply and fix in repairs PVC insulated and PVC sheathed multi stranded copper conductor cable, conforming to IS - 7098 (Part- I) of size 3 core 4sqmm, 1100 volts grade including necessary water proof connection to submersible pump at cable lead complete all as directed.Note:- Cost of Taking out,excavation,removing,return filling of soil,road cutting and cable protection GI Pipe of 20 mm size is included in the rate of this item.

Taking out and lifting of existing submersible pump set of capacity upto 2 HP, 3 phase, 415 volts for carrying out repair/ overhauling of pump/ rewinding motor of different location alongwith column pipe of 50/80 mm bore with submercible cable from the bore well of depth upto 30 m to 90 m and transporting to work shop, replacement of defective parts, opening, cleaning, oiling, greasing and reinstallation including testing, comissioning complete all as directed.

ASHOKA ASSOCIATES