REPAIR MAINT OF FLOORING WALL TILING AND SANITARY IN MARRIED ACCN OF ZONE A UNDER AGE BR I AT BB CANTT SRINAGAR

Amount

Demolition of cement concrete (unreinforced) as in ground floor and paving, not exc 15cm thick below or above ground level, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4, complete all specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4, complete all specified and directed.

M&L for Coloured Glazed ceramic tiles on vertical surface as in dado, skirting of size 350x 250x 7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4, complete all specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, on vertical surface as in dado, skirting, polished, area of each tiles not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile fixed over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement and making joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4, type B-2 (Using 40mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified and directed.

M&L for Chequred cement concrete tiles of size 30cmx30cmx25mm thick with hard glazed finish rubber topping with grey cement and no pigments laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4), set, jointed and pointed in neat cemet slurry complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even & fair complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F in repair for 3 tier Corner Glass shelf of size 300x300mm (Big), 200x200mm (Medium) & 150x150mm (Small) three set, with CP brackets and railing complete all as specified and directed

S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for 15 mm bore iron pipe, complete all as specified and directed.

S&F in repairs brass chromium plated Towel Rail 600mm long between flange, 'D' type complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed.

S&F in replair vitreous china, white, wash hand basin, flat back of size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand and 15mm dia CP pillar tap, waste pipe etc complete all as specified and directed.

S&F in replair chromium plated, fancy type mixer for mixing hot & cold water, suitable for wash hand basin/sink, screwed for iron pipe 15mm bore, complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern of size 580mm x 440mm white, with foot rests and including CI 'P' or 'S' trap but excluding flushing cistern and flush pipe and making good surface, complete all as specified and directed.

S&F in repais vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc., complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., complete all as specified and directed.

S&F in repairs 15mm bore stop valve or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repair PVC connection 15mm size, 450mm long with PTMT nuts, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 50mm dia of outlet complete all as specified and directed.

S&F in repair 50mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and directed.

D N ENTERPRISES

M/S Vivek Gupta and Co

mirandcompany

M/S MOHAMAD YOUSUF AKHOON AND SONS

M/S Mian Rashid Wani

M/S SHIMAR STAR GLACIER

MOHAMMAD YOUSUF MIR

M/S Bhat Contractors