Providing AC Scheet Roofing and Flooring for Jayapuram Primary Health Center Ward No.-25 in Tindivanam Municipality

Amount

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply and delivery of 50mm Dia G.I pipe ‘B’ Class with ISI mark etc. complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Cement concrete 1:4:8 mix ( One cement 4 sand and eight 40 mm HBG ISS metal ) using 40 mm HBG metal for foundation and basement and including cost & conveyance and all labour charges including dewatering if found necessary and said layer in not more than 15 Cm thick etc., complete as per standard specification.

Centering the soffits of Drain sides plain surface including using steel sheet with mild steel angle of size 25mm x 25mm x 3mm laid over deer joined of size 10mm x 6.5cm spacing about 90cm c/c and supported by casurina pole of 10cm to 13cm dia spacing 75cm c/c etc. including cost and conveyance charges etc.complete as per standard specification.

Plain Cement Concrete 1:2:4 Mix Using 20mm ISS HBG Metal including cost of Metal and conveyance charges and including all labour charges and all other incidential charges etc., complete as per standard specification.

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone in Clay Walls under 3m high

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Reinforced Cement Concrete 1:1.5:3 (one cement two sand four aggregate) Mix using 20mm ISS HBG Metal for foundation and flooring concrete including cost of material and conveying charges and all labour charges and all other incidental charges etc., complete complying with standard specification.

TDR and Co (BID ID -1286846)