NHIDCL/RO-Imphal/NH102B/26

Tack Coat on bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressur distributor @ 0.20 kg/sqm on the prepared bituminous surface cleaned with mechanical broom.)

Bituminous Concrete (Providing and laying Bituminious concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smoth wheeled, vibratory and tandem rollers to achieve desired compaction as per MoRTH specification clause No.507 complete in all respects.) (i) for Grading- II (10 mm nominal size) (a) VG-40

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from sheaks and holes.)

Hill side Drain Clearance,Removal of earth from the choked hill side drain and disposing it on the valley side manually.

Clearing gtass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . (l) By Manual Means