Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹34.5 L+₹5.3 L (18.0%)Rejected-Finance | L2 | Rejected-Finance Highest amount quoted | |
| 3 | L3₹36.2 L+₹6.9 L (23.6%)Rejected-Finance | L3 | Rejected-Finance Highest amount quoted |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
8 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I UDAIPUR
ASST. GARRISON ENGINEER (I) EKLINGGARH CANTT, UDAIPUR (RAJ.) - 313001
SMART PERIODICAL SERVICES AND WELCOME MAINTENANCE TO MD OFFRS ACCN AT MIL STN UDAIPUR
2024_MES_646029_1
8873/E8/AGE (I) UDAIPUR
Open Tender
Civil Works
Item Rate
270 days
ARMY AREA UDAIPUR
AS PER TENDER DOCUMENTS
5 documents required · 5 mandatory
₹500
AGE I UDAIPUR
₹60,000
29 Apr 2024
12 Mar 2024
11 Apr 2024
12 Mar 2024
8 Apr 2024
26 Mar 2024
Amount
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhat complete all as specified.
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, from chowkhat complete all as specified.
Material and Labour for Non-skid jointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
Material and Labour for Vitrified digital double charge tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.
All as per above but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed.
Material and Labour for Glazed ceramic coloured tiles in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified & directed.
Material and Labour for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, pillars, window cills, cooking platforms including half round moulding as reqd, making hole for gas pipe etc. and like in cement mortar (1:4) incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick CM 1:6 screed bed.
Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEJZ/TD/12/2008 sheet 1/3 to 3/3.
Demolation of brickwork or stone/ boulder masonry, built in cement mortar.
Material and Labour for sub-class ‘B’ old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6).
Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
Supply & Fixing in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
Supply & Fixing of 20 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as spd and directed.
Supply & Fixing of 15 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as spd and directed.
Supply and Fixing in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Prayag/Hindware
Supply and Fixing in repair Brass CP bath Mixer 3 in 1 system with 115 mm long bend pipe connection with provision for overhead and hand shower suitable 15mm bore of pipe and fixed. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing in repair chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing CP jet spray with flexible tube etc complete all as specified & directed. Make: Jaquar Essco/Prayag/Hindware
Supply and Fixing health faucet (hand shower) (ABS body) with 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed. Make: Jaquar Essco/Prayag/ Hindware
Supply and Fixing in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge. Make: Jaquar/plumber/Prayag
Supply and Fixing in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified. Make : Jaquar/plumber/Prayag
Supply and Fixing in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. Make: Jaquar/plumber/Prayag
Supply and Fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. Make:Jaquar/Prayag/plumber
Supply & Fixing in repair Corner glass shelf size 200 mm radius with and including bracket and glass complete set etc.
Supply & Fixing in repair Glass shelf size 500 X 125 mm radius with and including bracket and glass complete set etc.
Supply and Fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. Make: Parryware/Jaquar/Prayag/Cera
Supply and Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 all as specified.
Supply and Fixing in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge. Make:Parryware/Hindware/Jaquar/Cera
Supply and Fixing in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed. Make:Parryware/Hindware/Jaquar/Prayag
Supply and Fixing repair plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge. Make:Parryware/Hindware/Jaquar/Prayag
Supply and Fixing vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed. Make:Parryware/Hindware/Jaquar/Prayag
Supply and Fixing for Coat hook/Robe hook of brass chromium plated body fixed to wooden plugs with screws and cup washers fixed in repairs. Make- Prayag Cantabile - Niagara series CAT No-BA -87 or equivalent
Supply and Fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete. Make-Nirali/Prayag/Jayna/Pearl
Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod.
Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.
Supply & fixing of stainless steel decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.
Supply and Fixing in repair floor door stopper of aluminium alloy body and tongue two legged , anodised, with hard drawn steel spring, fixed in floor 150mm length.
Supply and Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/steel frame.
Supply and Fixing PVC floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement type B1 (1:2:4).
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete.
Supply and Fixing for 3mm thick plain Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane
Material and labour for anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Note minimum thickness of powder coating 50 micron.
Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note minimum thickness of powder coating 50 micron.
Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
Supply & Fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .
Supply & Fixing in repairs 18 mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works, complete all as specified and as directed. Make : Rajshri Plastiwood
All as per item above but 18 mm thick Plain PVC celuka ply -ditto-.
All as per item above but 12 mm thick Plain PVC celuka ply -ditto-.
All as per item above but 5 mm thick Plain PVC celuka ply -ditto-.
Supply & Fixing in repairs brass handle fabricated type polished of size 75 mm, complete all as specified and as directed.
Supply & fixing in repair self closing/auto Casement type hinges 90/180 degree fixed to Modular Kitchen cabinets in Offrs Md Accn, complete all as specified and as directed. Make: Haffle/ Dorma/Hettich
Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm
Supply & Fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified
Supply & Fixing in repair self closing/auto Casement type hinges 90/180 degree. (Make: Haffle/ Dorma/Hettich)
Supply & Fixing in repair stainless steel kitchen rack, basket Trolley grill type or perforated type or wire type or other any type of approved make all as spd.
Supply & Fixing in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc Make : Hettich/Haffle/KEA
Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished
Material and Labour for Preparation of old surfaces of walls, pillars cornices surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and directed.
Material and Labour for Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.
Material and Labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.
Material and Labour for subsequent coat of distemper oil emulsion ( White/ Ivory or any colour) over one coat applied under Srl item No 60 above.
Material and Labour for applying 1 mm thick weather coat Asian/Birla/JK wall care white putty in two layers including complete removal of existing treatment of internal or exxternal walls, roof projection, fins and fascia etc. with wire brush or any manual other mechanical method by manual and reaching upto old plastered surface complete all as specified and directed.
Material and Labour for applying one coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints/Indigo Paints
Material and Labour for applying two coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints/Indigo Paints
Material and Labour one coat of exterior emulsion paint white or tinted on old treated walls or fascia of roof or chajjas on prepared putty surfaces of bldg upto tripple storeys bldgs complete all as specified & directed. Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)
Material and Labour for one coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas width between 10 cm to 20 cm on prepared putty surfaces or old painted surfaces of bldg upto tripple storeys bldgs including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified & directed. Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)
Material and Labour two coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas on prepared putty surfaces or old painted surfaces of bldg upto tripple storeys bldgs complete all as specified & directed. Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)
Material and Labour for applying one coat of synthetic enamel paint on wooden surfaces or wood based surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Synthetic Hi- Gloss
Material and Labour for applying one coat of synthetic enamel paint on steel surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Synthetic Hi- Gloss
Material and Labour for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surface, kerb stone and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed incl WPC @ 200 ML per 50 kg cement bag or as per manufacture instructions Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate).
Material and Labour for 15mm thick plaster in cement mortar 1:6 on fair faces of brick or concrete surface and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed.
Material and Labour for 10mm thick plaster in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed.
Supply only liquid water proofing compound, ISI marked complete all as specified and directed.
Material and labour for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified. Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints
Material and Labour for applying two coat of oil bound distemper incl preparation of newly plastered surfaces of walls, pillars cornices etc complete all as specified and directed.
Material and Labour for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.
Material and Labour for repairing of RCC projection, Chajjas, Facia,Bands, Shelves, Beam, RCC railing, Balcony and similar works by dismantling of loose / disuntegrated portion of RCC at any height and in any situation floor including provn of support with chicken wire mesh and dubbing/filling with PCC (1:2:4) type B-0 using 12.5 mm graded aggregate 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed.
Material and Labour for applying two coats glossy Indigo floor coat emulsion paint premium series or equivalent on existing old paver block/ chequered tiles foors any pattern including removing caked mud, trading oil and greasy spots, cleaning with water complete all as specified and directed.
Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.
Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Material and labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continious earthing in & including PVC rigid conduit concealed on stone/brick masonry wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch.
One light point point controlled by one switch with cables 1.5 sq. mm size
One fan/exhaust fan point controlled by one switch with cables 1.5 sq. mm size
One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size.
One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size.
One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size.
One light point controlled by two 2-way switches, with cables 1.5 sq. mm size.
One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch
All as per items No 2 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge. (Make: Anchor/Havells/Polycab)
Supply & Fixing Switch piano, flush type single pole, one way 6 Amp all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing Modular switch 1 way 6A,1 module complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing switch piano type, flush button single pole, two way 5/6 amps complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing bell push flush type single pole, 5 amps complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole. (Make: Anchor/Havells/GM)
Supply & Fixing switch piano flush type, single pole, one way 16 Amps complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing modular switch 1 way 16A, 1 module complete all as specified and directed. (Make: Anchor/Havells/GM)
Material and labour socket outlet 2 in 1, 3 pin, 6A flush type complete all as specified and directed. (Make: Anchor/Havells/GM)
Material and labour Socket, 6A - 2/3 pin combined 2 module, type complete all as specified and directed. (Make: Anchor/Havells/GM)
Material and labour socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed. (Make: Anchor/Havells/GM)
Material and labour Socket 6A/16A - 2/3 pin combined 2 modular type complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixingixing inreplacement of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing inreplacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings (Make: Anchor/Havells/GM)
Supply & Fixing inreplacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed. (Make: Anchor/Havells/GM)
Supply & Fixing inreplacement of MCB distribution box double door powder coated sheet metal encloser 240 volts SPN with 200 amps rated bus bar including dismantling old one of the following type. (Make: ABB/L&T/Legrand)
Supply and fixing inreplacement of 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning.
Supply and fixing inreplacement of SPN 40 TO 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing inreplacement of SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing inreplacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Material and labour for wiring for circuit/submain wiring in PVC sonduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed including dismantling old one as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.
Material and labour for wiring for circuit/submain wiring in PVC sonduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed including dismantling old one as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.
Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.
Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and neutral and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge. (Make: ABB/L & T/Legrand)
Supply & fixing inreplacement LED tube light 10 watt, 2 feet long all as per directed by Engr-in-Charge. (Make - Crompton/Havells/ Philips)
Supply & fixing inreplacement LED tube light 20 watt, 4 feet long all as per directed by Engr-in-Charge. (Make - Crompton/Havells/ Philips)
Supply & fixing decorative wall mount light fitting with LED with bulb cap 12 watt. (Make - Crompton/Havells/ Philips)
Supply & Fixing building security light LED 25 watts including 25mm dia GI pipe with 120 degree bend with all accesories including fitting with point wiring in casing caping, with PVC box and switch PTS and all as specified and directed by Engr-in-chargewatt. (Make - Crompton/Havells/ Philips)
Taking down old U/S exhaust fan and supply and fixing metal/PVC frame exhaust fan of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed. (Make Havells/Orient/Bajaj)
Taking down old U/S exhaust fan and supply and fixing metal exhaust fan of size 300mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed. (Make Havells/Orient/Bajaj)
M/s SUNIL ENTERPRISES
M.A. MUNSHI AND CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .