8418 CERTAIN REPAIR REPLACEMENT OF ELECTRIC WIRING AND FITTING AND FIXTURES AT PCDA N NCS WORLI MMCB IN THE AREA OF AGE EM NW KUNJALI UNDER GE NW KUNJLAI

Amount

M&L in reapir for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts, ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC moulded box with Hylem sheet ISI marked (Make : schneider elect/legrand mosaic/anchor ave) fixed on wall for One light/fan/ bell point controlled by one 5A switch complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

(a) One light point controlled by one 5A switch

(b) One Fan point controlled by one 5A switch

(c) One 5A switch socket combination on the same board

(d) One 5A switch socket point on independent board

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC moulded box/ hylem sheet ISI marked fixed on wall complete comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/yellow/Blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately (c) Make of wire :- Polycab/ Havells/ Gloster / Plaza. (d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza.

M&L point wiring complete with 2.5Sq. mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC moulded box/ hylem sheet ISI marked fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 2.5Sq. mm as earth continuity conductor connected to common earth dolly with and including PVC moulded box with Hylem sheet ISI marked (Make : schneider elect/legrand mosaic/anchor ave) fixed on wall for 15 amp swich socket on independant board complete all as specified. Note: (a) Colour coding shall be folowed as (i) Phase- Red/yellow/Blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately (c) Make of wire :- Polycab/ Havells/ Gloster / Plaza. (d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza.

S & F switch piano flush type single pole one way, 5/6 Amps complete all as specified and directed. Make: Anchor/Roma plus/Legrand

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed. Make: Anchor/Roma plus/Legrand

Supply and fix switch socket combination multi purpose 3 pin 15 Amps controlled by one switch flush type 240 Volts AC complete all as specified and directed. Make: Anchor/Roma plus/Legrand

S & F fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed. Make: Anchor/Roma plus/Legrand

M&L in reapir for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts, ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete for One light/fan/bell point controlled by one 5A switch complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

(i) One light point controlled by one 5A switch

(ii) One Fan point controlled by one 5A switch

(iii) One 5A flush type switch socket point on same board

(iv)One 5A flush type switch socket point on independent board

M&L in repair for point wiring (Work station for computer) complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster/ Plaza

M&L in repair for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed. Make: Anchor/Roma/Legrand/ goldmedal

S&F modular switch 1 way 6A,1 module all as specified and directed. Make: Anchor/Roma plus/Legrand

S&F modular switch 1 way 16A, 1 module all as specified and directed. Make: Anchor/Roma plus/Legrand

S&F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make: Anchor/Roma plus/Legrand

S&F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma plus/Legrand

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make: Anchor/Roma plus/Legrand

S & F lamp holder PVC/polycarbonate insulated body type complete all as directed. Make : C&S cat No ACBHA006/Anchor/Roma

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /GE/ C&S

M&L for sub-main wiring with 2 runs of 2.5sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

M&L for sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

M&L for sub-main wiring with 2 runs of 6.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade non metallic PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

M&L for sub-main wiring with 4 runs of 10.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade non metallic PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including 2 run of 10.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 41 or equivalent Cat part in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting VTPN 8 way, 440 volts with 100A Copper Busbar rating 440 Amps, for each phase, 2 Neutral bar, 2 Earth bar, dust and vermin proof with provision for DPX³ 160 MCCB as incomer DP MCB/ Isolator/ RCCB/ RCBO as sub incomers and SP MCB's as outgoing etc. complete all as directed. Make - Legrand cat No 5077 52 or equivalent in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting VTPN 12 way, 440 volts with 100A Copper Busbar rating 440 Amps, for each phase, 2 Neutral bar, 2 Earth bar, dust and vermin proof with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP/TP MCB's as outgoing etc complete all as directed. Make - Legrand cat No 5077 53 or equivalent in Siemens/GE NOTE FOR ITEM No. 23 to 25 : MCB DBs shall be concealed in wall where ever posible including cost of removing old wooden box making good the surface to match with surrounding deemed to be included in quoted rates

S & F in replacement MCCB, 415 volts, four pole of cap 125 Amps, 16/18 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand cat No 4200 16 or equivalent in siemens/GE / C&S

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed. Make: Legrand cat No 4085 87-95 or equivalent Cat part in Seimens/C&S.

S & F in replacement of MCB SPN 40-63 Amps capacity, 10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 18-20 or equivalent Cat part in Seimens/C&S.

S & F in replacement of MCB TP 40-63 Amps capacity, 10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 59-61 or equivalent Cat part in Seimens/C&S.

Supply and fixing in repair walll/surface mounted Sirius series PDC aluminium housing with polycarbonate fiffuser, SMD LED and heat sink integrated with housing 10W LED bulk head fitting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling including connecting up with twin core copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTB10WLED(SIRIUS SERIES) or equivalent cat part in Crompton/ Bajaj /Philips

S & F in repirs LED light fitting 10W, 230 V, 2 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB2F10WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Bajaj /Philips

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Bajaj /Philips

Supply and fixing in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: C&S cat No LTCRSLM36WATT 2X2 or equivalent Cat part in Bajaj / Philips / Crompton

Supply and fixing in repair new generation recessed mounting Aluminium housing downlight ultra slim round Luminaire 15 watt and high translucent diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: C&S cat Part No LTCRSLM15HPLEDRND/W (CARINA SERIES) or equivalent Cat part in Bajaj / Philips / Crompton

M&L for removing the existing window Air conditioner 1.5/2TR complete including all accessories and closing opening of wall with brick workin cement mortor 1:4, plastering , white washing / destempering to match with surroundings and Shifting of window type Air conditioner including accessories, making suitable size opening in existing wall suitable fixing air conditioner, fixing of wooden frane made out of not lessthan 50x75mm hard wood runners painting, fininshing in cement mortor in 1:4 white wasing / distempering to match with surroundings. at suitable location all as specified & directed.

M&L for shifting of Split AC unit from existing postion & refixing the new position/ location including additional accerssories as required, testing & commisssioning complete all as specified and as directed.

Supply and fixing in repair copper tubings of appropriate dia offor suction line & for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing thugh pipe and making good distrubed surface complete all as specified and as directed.

M&L for dismantling & taking down in replacement of old unservicable under votage trip device for 630-4000A for LT ACB 3 pole air circuit breakers 1000 amp capacity manual draw out type AC 415V 50Hz complete all as specified and as directed. Make C&S cat No. CS AUH-V-AWAUHVAB or suitable for existing ACB make

M&L for dismantling & taking down in replacement of old unservicable shunt trip & closing coil for 630-4000A for LT ACB 3 pole air circuit breakers 1000 amp capacity manual draw out type AC 415V 50Hz complete all as specified and as directed. Make C&S cat No.CS-AVHS-116 or equivalent as approved by GE

S&F in repairs of 0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter including suitable size of revits/nut bolts complete bending, shaping, drilling, cutting notching and all as specified and directed.

M&L for hanging ceiling fan in position & re-comissioning the same including making electric connection complete all as specified & directed

M&L for fixing Exhust fan/ wall mounted fan in position & re-commissioning the same including making electric connection complete all as specified and directed.

M&L for disconnecting & taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing with specified quilty grease & re-assembling the ceiling fan as a one unit, complete all as specified & directed. Note: Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A'

Preparation of painted surfaces of ceiling fan of any make & size & applying one coat of synthetic enamel white paint by spray painting including making of MES No/Unit name bottom of the fan by applying balck paint complete all as specified & directed.

All as per Srl item No. 44 here-in-before but gray paint/green for exhust fan/Air circulated fan size & make all as specified.

M&L for replacement of short circuit/over heated winding from stator of ceiling fan of any make having 1200mm sweep with matching gauge & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling complete re-assembling of fan with testing etc all as specified & directed.

All as per Srl item No. 46 here-in-before but exhust fan/ wall mounted fan any make having 300mm sweep.

All as per Srl item No. 46 here-in-before but exhust fan/ wall mounted fan any make having sweep more than 300mm sweep up to 450mm sweep

Replacement of gun metal bush with sutable size for ceiling any make any size and sweep complete all as specified and directed. Make: Bajaj/Khaitan/Oriental

Supply only ball bearing suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed Make:- SKF or NBC or equivalent as approved by GE.

Supply only ball bearing suitable for 300/450 mm sweep exhaust fan/ wall mounted fan

Supply and fixing in replacement of canopy (top& bottom) of ceiling fans any make/size with canopy of matching colour complete all as specified and directed. Make: Bajaj / USHA/CG/Havells.

Supply and fixing in replacement of rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan complete all as specified & directed.

Supply and fixing in replacement of down rod with clamps etc ceiling fan with down rod of 15mm bore medium grade GI pipe 0.30 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quility all as specified & directed. Make: Bajaj/Khaitan/Oriental

All as per Srl item No. 54 here-in-before but of 0.45 metre long

S&F in replacement of connector block of ceiling fan suitable size of approved quality complete all as specified & directed.

S&F on replacement of capacitor of capacity 2.5mfd with wire, suitable for ceiling fans and making connection complete all as specified & directed. Make:- Bajaj/ Khaitan/ Oriental/ Universal Surya/Usha/TIBCON/Havells/Epcos

All as per Srl item No. 57 here-in-before but of capacity 3.15mfd.

All as per Srl item No. 57 here-in-before but of capacity 4.0mfd.

S&F in replacement of blade of ceiling fan of any make with aluminium blade duly painted of sweep 1200mm including provision of screws etc fixing purpose complete all as specified & directed. Make:- Bajaj/CG/Havells/Cromton

S&F in replacement of Exhust fan blade, heavy duty 300mm sweep complete all as specified & directed. Make:- Bajaj/CG/Havells/Cromton

All as per Srl item No. 61 here-in-before but of Exhust fan blade, heavy duty 380mm sweep

All as per Srl item No. 61 here-in-before but of Exhust fan blade, heavy duty 450mm sweep

S&F in replacement of hanger clamp assembly of down rod for hanging of ceiling fan with nuts,bolts,washers & split pin complete all as specified & directed.

Supply, Fabrication and fixing of ceiling fan hooks and clamp of standard size with nuts, bolts and washers and complete works required at site for fixing of hooks all as specified and directed.

Genius Construction Co.

A P ENTERPRISES

DHARMESH ENTERPRISES

NOEL ENGINEERS

ORIENT ELECTRIC CO

MAHIMA CONSTRUCTION

Rohit Enterprises