Repair/Replacement/Maint of Unserviceable Security Lights alongwith connected Items at AF Stn Bhisiana

Amount

Taking down unserviceable Street Light fitting upto 11 mtrs HPSV/fluorescent Light fitting /CFL Fitting/LED Fitting /Flood Light fitting of any size from the Pole/Bldg and kept in safe custody for refixing or for Schedule of Credit to Contractor. Note : All T&P i.e Ladder, Tools, Safty Gloves etc will be provided by the Contractor without any extra Cost.

Repair/Maint of Street Light/Security Lights any B type Flood Lights, Post Lanterns or any other External Light in its position fixed on Pole/High Mast/Building Structure or by taking down to round, if required, testing all the Components /Parts wiring etc. identifying and replacing the defective components wise Choke (Ballast) Electronic Driver, Igniter, Capactor, Lamp, Lamp Holder, Connector, Connection Wire/ Cables, MCB etc.including refixing to its original Position (if) taken down including Repair, Maint of Street Light Control Timer & Junction Box all as directed by Engr-in-Charge from the date of commencemnt of the work. Note : The rate against the above mentioned items is deemed for cost of labour and allied expenses only.

Cost of Spare Choke (Ballast) Electronic Driver, Igniter, Capacitor, Lamp, Lamp Holder Connector replaces against above maintenance Item will be measured and paid seperately under respective item of Schedule.

The Contractor's Representative will report to concerened JE E/M at 0900 Hrs daily to collect the list of Defective Street Light fitting and will submit the Completion report on the same Day before 1730 Hrs to JE E/M.

The Contractor has to rectify the Defects/Reports and make the Street Light servicable with in 24 Hours from time the list of Defective Street Lights is handed over to him/her Rep by the concerened JE E/M. In case the Street Light is not made functional for whatsever reason with in the specified time line, an amount of Rs. 50/- per such Defective Street Light per day will recovered from the amount due to him/her through RAR /Final Bill. The Contractor shall be carry out Repair/Maint simentanously both Domestic & Tech Area by engaging seperate team of Electrician/Technician in order to ensure properly & timely rectification of Defects.

The Contractor shall maintain sufficient Stock of Spares/Materials required for Repair/Maint of Street Light with the concerened JE E/M. Note : Vehicle and T&P will be arrange by the contractor.

The Contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite Safety equipments and clothing to his men and department shall not be responsible for any mishappening/accident/injury to his men.

S&F 60 Watt LED based street light luminaries new generation energy saving & environment friendly light fitting high power LEDs as light sources. LED luminous efficiency should be > 80Lm/w. It should have active power factor correctio (APFC) electronic gear (electronic driver). Luminaire housing shall be of pressure die-cast aluminium alloy LM24 for gear and extruded aluminium lamp housing (Heat shrink for better heat transmission). It shall have epoxy powder coated grey finish phosphochromate treatment, IP-66 protection class I operating voltage range should be fron 120 volt to 270 volt AC and frequency range 50Hz. fitting should be suitable for an ambient temparature from -40°C to 50 °C and humidity level 10% to 90% including connection with PVC unsheathed wire aluminium conductor 3 x 1.5 sqmm with OH line or PVC junction box complete all as specified and directed by Engr-in-Charge.

S&F 45 Watt LED based street light luminaries new generation energy saving & environment friendly light fitting high power LEDs as light sources. LED luminous efficiency should be > 80Lm/w. It should have active power factor correctio (APFC) electronic gear (electronic driver). Luminaire housing shall be of pressure die-cast aluminium alloy LM24 for gear and extruded aluminium lamp housing (Heat shrink for better heat transmission). It shall have epoxy powder coated grey finish phosphochromate treatment,IP-66 protection class I operating voltage range should be fron 120 volt to 270 volt AC and frequency range 50Hz. fitting should be suitable for an ambient temparature from -40°C to 50 °C and humidity level 10% to 90% including connection with PVC unsheathed wire aluminium conductor 3 x 1.5 sqmm with OH line or PVC junction box complete all as specified and directed by Engr-in-Charge.

S&F 80 Watt LED Flood Light luminaire of epoxy powder coated CRCA MS housing with epoxy powder coated aluminium heat sink with system wattage with 120 degree view angle,>100 lumen/watt, lumen maintenance>70% at 50,000 Hrs, color temperature of 5000-6500K,> color rendering and LM80 test compliance. The driver must be integral APFC and constant current type having THD<15% and power factor>0.95 with short circuit protection,open protection, reverse polarity protection, high voltage protection complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

S&F 150 Watt LED Flood light luminaire of epoxy powder coated CRCA MS housing with epoxy powder coated aluminium heat sink with system wattage with 120 degree view angle>100 lumen/watt, lumen maintenance>70% at 50,000 Hrs, color temperature of 5000-6500K,> color rendering and LM80 test compliance. The driver must be integral APFC and constant current type having THD<15% and power factor>0.95 with short circuit protection, open protection, reverse polarity protection, high voltage protection complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

S&F 200 Watt LED Flood light luminaire of epoxy powder coated CRCA MS housing with epoxy powder coated aluminium heat sink with system wattage with 120 degree view angle,>100 lumen/watt, lumen maintenance>70% at 50,000 Hrs, color temperature of 5000-6500K,> color rendering and LM80 test compliance. The driver must be integral APFC and constant current type having THD<15% and power factor>0.95 with short circuit protection, open protection, reverse polarity protection, high voltage protection complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

S&F LED active Power factor correction (APFC) electronic gear (electronic driver) which uses 60 Nos 1W ( 60 W) high power LEDs as light sources all as directed by Engr-in-Charge.

S&F LED active Power factor correction (APFC) electronic gear (electronic driver) using 45 W LED as light sources all as directed by Engr-in-Charge.

S&F Street light GI pipe bracket 50 mm dia 1.50 mtr length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc.

S&F Street light GI pipe bracket 25mm dia 1.50 mtr length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc.

S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB. Note : DB will be measured and paid separately under respective items of Sch A.

MCB SPN 5 to 40 Amps.

MCB SP 5 to 40 Amps.

S&F Copper Conductor flexible cable with PVC insulator multi-stranded 3 core 1.5 Sqmm.

Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 10 to 50 sqmm, 2 to 4 core.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 Sq mm 4 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under sech. 'B'.

Supply, laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 Sq mm 2 Core with aluminum thimble of same size complete all as directed.

Supply, laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 Sq mm 2 Core with aluminum thimble of same size complete all as directed.

Supply, laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sq mm 4 Core with aluminum thimble of same size complete all as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated copper conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 2.5 sq. mm nominal cross section in service connections.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for foundation of Poles/laying of cables/stay/strut etc n.exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25 cm as directed.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5 mtr above the starting point.

M&L for providing Fazilka River Sand as in sand cushioning to under ground cable including punning down of sand in layers as specified and as directed.

Labour only for Re-using old bricks to provide brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick n.exc 10 mm complete all as specified and directed.

M&L for preparation of old steel surfaces and applying alternatively in yellow and black one coat of synthetic enamel black paint to steel tabular, pole upto 1 mtr height from ground level and remaining with two coats aluminium paint to LT pole including numbering of pole with black paint complete as specified and directed by Engr-in-Charge.

M&L for preparation of old PCC surfaces and applying alternatively in yellow and black one coat of synthetic enamel black paint to PCC pole upto 1 mtr height from ground level to LT pole including numbering of pole with black paint complete as specified and directed by Engr-in-Charge.

Supply, installing, testing and commissioning factory made LT feeder pillar box outdoor type platform mounted, suitable for 415 volts 3 Phase 4 wire, 50 Hz AC supply system all as specified and directed having bus bar installed on DMC/Epoxy insulators. The Panel shall be dust and vermin proof, IP-65 class protection and made of 3.15 mm CRCA MS sheet with front opening type with double door shutter and locking arrangement (including provn of lock with 2 keys), powder coated finish (over a coat of red oxide), primer on outside and two coats of red oxide primer on inside surface with TPN aluminium bus bar of rating not less than 200 Amps including 1 No MCB SPN 06 Amps on suitable foundation.

S&F PVC Sintex Box having aluminium bus bar suitable for street light connections including single pole MCB of rating 6 Amps, 2.5 sqmm copper comductor for connection and fixing arrangement to pole all as specified and directed by Engineer-in-Charge.

S&F tubular swaged pole including taking down for steel tubular swaged poles type 410-SP-31 (9 mtr long) with mild steel base plate of size 30cmx30cmx6mm thick, welded at bottom and cap finial taper plugs, bolt, nuts and screw as specified and fixed in true vertical position complete. Note : (a) Excavation earth work, shall be measured and paid separately under respective items. (b) Poles shall be painted with two coats of black bituminous paint throughout internally and externally up to planting depth. The remaining portion of the exterior surface shall be painted with two coats of aluminium paint over a coat of red oxide primer (c) Concrete work for foundation included in quoted rate.

M&L for galvanized steel tubing 15 mm dia medium garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Rasvinderpalandco

M/s SHIVA BUILDERS

M/s Luxmi Constructions