| 1 | | Rope diameter shall be 105 mm, Tensile strength shall be more than 30 kN, Weigh shall be 704 grams per meter, Knot ability shall be 08, Sheath slippage shall be 0%, Elongation at 80 kg shall be les than 23 %, Shrinkage shall be 4%
Shall able to take impact of 527 kN, Shall be made of kern mantle Construction, Core shall be made of low shrink, type 6 nylon, Core shall be constructed from continuous filament double twist (S & Z) cabled strands, Shall have ability to absorb accidental shock loading UIAA fall rating shall be 15, Shall give high resistance to spinning during ascending and rappelling, Sheath shall be made of solution dyed polyester (Black Color), Sheath should be braided with 32 or 48 carriers (strands), Rope shall have 356% Sheath to core, Rope should retain its cross section well without lumpiness or a sacrifice in fleibility, Shall not be flattened out for smoother running in descent control device, Should be of black color for low visibility, Rope should be design for tactical (military, police) application with low visibility, low elongation with occasional shock load absorption with highly cut & wear resistance | 500 | pieces | [email protected] | 45 |
| 2 | | Colour Points Green White, Material Dyneema, Size of item 650mm, Width item 13mm, Packaging unit 1, Format Bent rubber, Weight 39g, Net weight of item 0.039, Gross weight of item 0.049, Standard CEN EN566, Standard UIAA 104, Breaking Strength 22kN | 25 | pieces | [email protected] | 45 |
| 3 | | Colour Black, Material Polyamide, Size of item 100m, Diameter 60mm, Format Spool, Weight 27gm, Net weight of item 2,7, Gross weight of item 2,71, Breaking Strength 7,7kN | 100 | pieces | [email protected] | 45 |
| 4 | | Etriers should be are made from a single length of medium-weight, flat weave nylon webbing with stiffeners sewn into, The bottom of the steps shall be designed for easy access, Shall be sewn with nylon thread, For high clip a webbing loop should be sewn at the top, Step strength should be 235kN or more, Overall loop strength should be 30 kN or more, Should have 6 alternatively sewn steps, Should be black in colour | 10 | pieces | [email protected] | 45 |
| 5 | Tactical Rappel FAST Rope Gloves | Should be made of thick full-grain leather, Second palm etends over the palm and to the second joint of the fingers to provide added protection from the heat and friction generated during slithering, Inde finger should be eparated for trigger finger deterity Should be designed to fit over flight gloves, Should be also ecellent for tactical and heli rappel use, Should have carabiner holeloop in wrist for attaching to harness, Should be available in black color Should have sizes from S to 2L | 25 | pieces | [email protected] | 45 |
| 6 | | Designed for use as a full body harness for insertion and etraction applications, Should works well for emergency entries from multistory buildings or rooftops, Should have dorsal D ring is used for Lanyard attachment, Should have safety sternum strap with quick connect buckle for added security during SPIE usage, Should have sternum level attachment point to allow an injured or wounded soldier to be lowered in an upright position, Should have quick connect buckles on leg portion of harness for easy and fast donning, Size OSFA, Material AL7075 Nylon, Weight 767 gm, Certification CE (EN12277) | 30 | pieces | [email protected] | 45 |
| 7 | | Should be a beefy with square corner design to allow easy stacking, Should be made of 1200 denier nylon ballistic cloth, Should be taped, triple stitched seams, Should be a heavy duty zipper no 10 with wear flap, Should have release buckles on handles allow for secure closure over zipper, Should have drag loops on bag ends, Should have at least 700 cubic inches volume | 3 | pieces | [email protected] | 45 |
| 8 | | Palm Should be made of a layer of suede leather, Back of the mittens should be made of canvas, Palm should have second layer of reinforced leather stripe which should cover the path of rope passing through the palm, Thumb should have a second layer of leather to protect the thumb, Cuff should have elastic closure with carabiner loop, A carabiner loop can be used as a draw loop as well, Mittens should be soft enough handle the little things and tough enough to protect from burns, Mittens shall be a snug fit with ergonomic design | 25 | pieces | [email protected] | 45 |
| 9 | Automatic Abseil AND Belay Device | should be done abseil, belay automatically with a very compact and rugged construction, Body should be made of forged aluminum, dropped and anodized, Brake Cam should be made of Steel, Should be tested for unepected fall in load as per EN 15 151, Should position and hold as per EN 358, Should rope shortening function as per - EN 353-2, Should be used for rappelling in passive and active mode as per - EN 341 A, Should be used as a removable backstop for mobile systems, Should be used as a backing up the rear pulley systems, should be used as a stepladder when climbing on the suspended rope, Should have locking and control mechanism with an overload protection (panic alarm) in order when lowering rappelling to avoid an ecessive descent (double-stop function), Should be tested for following standards EN 341 Class A, EN 358, EN 353-2, EN 15 151 - EN 892 | 2 | pieces | [email protected] | 45 |
| 10 | | ColourBody Silver shinny, Gate Dark Grey shinny, Material Aluminium 7075, Size of item110mm, Width item 9mm, Size of Packaging cm6212, (width deep high), Packaging unit1, FormatWithout Manual User, Weight 68g, Net weight of item0,068, Gross weight of item0,078, Standard CEN EN12275, Standard UIAA 121, Major ais strength 22kN, Minor ais strength 7kN, Open gate strength 7kN, Locking System Straight Gate, key lock, Type of RopeB, Gate opening 22mm | 50 | pieces | [email protected] | 45 |