Taper roller bearing assembly (CE) of M/ [Taper roller bearing assembly (CE) of M/s Timken, USA (CE:M349547 /510) +Taper roller bearing assembly (Pinion En [Taper roller bearing assembly (Pinion End) of M/s Timken, USA Type No. M249747/710

Item is reserved for IREPS Vendor directory sources. Pl Follow IREPS Vendor Directory RDSO-Item ID-3100216.

Preferably manufacturers should participate. Participating traders/agents must attach authorization letter issued by the OEM or OEM authorized stockist along with their offer. Authorization letter should preferably be tender specific. In case of general authorization letter, it must clearly indicate the validity period/expiry date. Offers with general authorization letter silent on validity period/expiry date will not be considered for placement of order and that offer is liable to be ignored. please refer Para 3.4 of Part B of Southern Railway Tender conditions)

As per Railway Board letter No.2021/ RS(G)/779/71 dt.09/05/2025, It is clarified that Railway units, other than the concerned nominated vendor approving agencies, are permitted only to place orders either on developmental vendors or approved vendors, for the items which are restricted to be procured from vendors listed on UVAM. No orders can be placed by Railway Units, other than nominated vendor approving agencies, on vendors who are not Developmental Vendors or Approved Vendors. Developmental Vendors are only such vendors which are listed as developmental vendors on UVAM without any condition.

Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

Please enter the percentage of local content in the material being offered.Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender condition

Tenderers shall confirm the following declaration failing which the offer will be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India.I certify that this bidder is not from such a country or,if from such a country,has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where appIicabIe, evidence of valid registration by the Competent Authority shall be attached.

HSN CODE 8607 [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Mode of despatch : Rail/Road. If dispatch is by Road, door delivery only is accepted: Free door delivery to ELS/ED along with Delivery Challan (i.e. Postal Address is: To, The Senior Section Engineer (Stores section), Electric Loco Shed, near Kollampallayam, Erode- 638002). Southern railway GST No.is 33AAAGM0289C1ZQ 2). Unloading the materials to be arranged by firm. 3) Material has to be strictly supplied within delivery date. Otherwise, Liquidated damage (LD) will be imposed viz. 0.5 percentage per week, upper limit being 10 percentage on delayed supply. 4) Before supply the material, validity of delivery period should be ensured. If Delivery period is expired, Modification of Purchase order (MOP) for extension of Delivery Period to be obtained duly applying in IREPS Portal. 5) Material should be supplied along with e-dispatch note. E-way bill to be submitted along with supply if value of material is more than Rs. 50,000/-. 6) If the material is not supplied after the delivery due date mentioned in P.O, (or) Extended delivery date as per MOP, then this purchase order will get cancelled without intimation to firm duly imposing GD (General Damage).